Answered

Just got Yonomi’s 30-day notice “sunset” email hence this request.  I currently use Yonomi routines to control the inputs to the Sonos Amp that plays through the speakers on our DeckIf I say “Alexa turn on Deck Cable” then the audio output from our Virgin box is played via line-in and the volume set to 35If I say “Alexa turn on Deck Radio” then a Radio Staion I have in my Sonos favorites is set to play and Volume set to 50If I say “Alexa turn off Deck Cable” or “Turn off Deck Radio” then The Amp pauses.Can anyone suggest an easy (preferably free!) way to replicate this?Many thanksJust found out that as Line In can be added to “My Sonos” I should be able to use IFTTT to access it - when I first automated this that wasn’t possible so I had to use Yonomi.  Just need to work my way round editing in IFTTT.  Yonomi was so easy to do.Found that editing IFTTT in Windows much easier than in IOS app - just need to decide if its worth £2 a month to get more than two applets and more actions. Mode

I have a Sonos 1, a Sonos play and a ray soundbar. When I power up my Sonos play or 1 the app always defaults to the soundbar and I cannot see the others. Do I need to reset with a hard wire to the router again?

I need a link to a download for a mac 

Why stops some of my units playing music sometimes and after a few seconds the music comes back

Hi, I'll replace my old Sonos Connect (Gen 1) for a Port, will my Sonos Play 3 and Play 1 system speakers work?I’m migrating from S1 to S2 and I wanted just to make sure it’ll work or should I get a second hand Connect (Gen 2) ?Thanks for your help to figure this out!

Does Sonos Five supports stereo mode while they are feeding through a stereo pre amplifier via their line inputs ?

I recently purchased a fancy new record player with the intent of playing my vinyl songs through RCA cable to my Connect:AMP gen1 on s1 (can’t upgrade to s2 software) and then actually played through my Play:1 gen1 pair (say they CAN be downgraded to s1 software), I’ve been trying to downgrade the Play:1’s for forever and always throw an errror code and say they can’t be downgraded, I NEED HELP!!!!

I’ve been using a Sonos One with SVC and Alexa for 5 months. Recently, SVC stopped responding, so I tried removing it and reinstalling, but it fails near the end of the SVC installation process every time. I’ve tried from 2 different devices with the same result.  Today I’ve done a reset of the One and tried again, but it still fails. Alexa and music services appear to be working normally. Any suggestions?Moderator edit: combined posts:Scrub that! Since the system reset now Alexa won’t play any music. Internet queries are fine and Airplay still works 😞 Ok, got Alexa working again by removing the Sonos skill and re-adding it. Still can’t install SVC. I should add that I’m running the latest App and firmware versions available. The installation appears to fail at around 90% progress.

I have a sub mini in my game room/office/hobby room currently, along with a Beam Gen 1 and pair of play 1s.  It currently sits on the floor just to right of the TV console, and perfectly happy with it’s performance.  However, for various reasons, I’m thinking about putting in an enclosure for a few different reasons.The enclosure would essentially be something I build myself and completely replaces the TV console.  What sort of air space does the Sub mini need on the sides, top and rear?   From what I’ve looked at, vibrations and air flow wouldn’t be an issue as long as there is an inch or so of clearance on all sides. Sound quality is what I’d be concerned about  The front would be fully open of course.  Material of the enclosure would be ¾ MDF or plywood, if that matters.Normally, I would just test it out to see what I think, but I don’t want to spend the time making it if it’s unlikely to work well.  There are few other places I could put the sub, as space is limited in the room but

SONOS ONE . Cambiato telefono . Il messaggio dice: Per continuare ,connetti questo dispositivo mobile (iphone) al Wi Fi.In realtà iphone è già connesso al wi fi . Preciso che il sonos one funziona perfettamente dal PC

after the latest update to 15.8 my rear play 1s seem to be dropping out and it changes the whole sound profile. The sound gets super flat and its very noticable when they come back. It happens fairly often. I had issues upating them to 15.8 while everything else updated fine. The sonos app would error a few times but eventually showed no updates available. Any ideas how I can fix his?setup: sonos playbase, sub, play1s connected to wifi

Sonos support is telling me I can't currently control my Play 1 speakers with the c2 app (which I need in order to add a new Sonos sub).  This totally contradicts their online compatibility list.  Can anyone confirm this or provide more info? 

I’ve got a Beam Gen 2 with a pair of Play 1’s for surround, using a Samsung QE49Q60 TV. Dolby Atmos works just fine via streaming services (ie ‘Rings of Power’ on Amazon) and sounds great. When I check the Sonos app on my phone, I can see that the soundtrack is playing in Atmos.Problem is, I can’t get Atmos out of either of my available blu-ray players. The one I use for this setup is a Samsung UBD-K8500. 5:1 works just fine, but playing, for instance, the 4K disc of ‘Dune’, the Dolby Atmos soundtrack only comes out as 5:1.Checking the sound settings on the TV, the ‘Dolby Digital+’ option is greyed out.I tested with our living room blu ray player - a Panasonic DMP UB900, and things were even more disappointing. Various changes to the settings got me no further than a stereo output for pretty much any disc I tried - and in every case the only option in the TV’s sound setting was to output for PCM.The Beam is connected to the eArc input on the TV, the players via HDMI to the TV.Looking o

I just found out that sonos now supports Apple Music.I have spotify but everything else in my house is apple.I was thinking of making the switch to apple music now that it is supported but I have an older system currently and wondering if I will need to upgrade.I have one generation 1 with alexa, Play 1, Playbar and 2 Play 3 Thanks  

I have an arc in the main room and ceiling speakers in the same room. The amp for those speakers is in a rack in the basement. Can I make the amp surrounds if the amp is not line of site to the arc? 

I want to connect two pair of Definitive Technologies AW6500 speakers to a Sonos Amp. According to the speaker installation instructions, each speaker presents a nominal impedance of 4-8 ohms. The Sonos Amp states it provides 125Watt continuous power sine wave, into an 8-ohm load, both channels driven. It further states that the Sonos Amp can power two pairs of 8-ohm nominal passive speakers wired in parallel. My question is can I safely wire each pair of the AW6500 speakers in parallel to the left and right channel of a Sonos Amp? If the speaker instructions indicated 8 ohms, I would have no question. However, stating 4-8 ohms has me questioning if this is safe. Any feedback will be appreciated.

Hi I am a resident in the UK. I normally listen to Greatest Hits Radio but in the last 2 days whenever I’ve picked GHR to listen too the Sonos has played Gold and vice versa? Is this a radio station issue or a system fault?

Does anyone know why TuneIn radio is unable to play Radio X today? It plays its sister station Radio X Classic Rock perfectly

After many hours of effort I have finally upgraded my old S1 to S2 with my Play 3's.I am using a new Samsung Galaxy S8+ tablet but there seems to be limited functionality on this device.I would like to add Samsung music which resides on this device.I would also like to add my CD collection which is on my laptop.It appears there is an issue at the moment with Sonos and adding libraries but I can't even see an option.I am a bit traumatised about being too ambitious at the moment in case I undo the many hours already spent. Is there greater functionality on a laptop than a tablet ?Any help is appreciatedFletch  

I recently ordered my brand new RT81+ turntable from Fluance but I still haven’t the slightest clue as to how I will be able to connect it to my Sonos Era 100 via line-in. Yes, it comes with a built-in preamp and RCA cables, but how would I be able to connect those to my Sonos even with a USB-C adapter? I am very confused, do I need to buy an additional aux cable or not, please help me understand!

Any recommendations on best placement for two Sonance wall mount architectural speakers? Will be connected to Sonos Amp (inside).  70% music 30% TV **Trying to figure out how to upload image

Hi,I am super happy with my new Era 100 set. Have now paired with a Sub and awesome sound experience!One concern though: When connecting my PC through bluetooth, after several days, the connection is dropped by sonos and I cannot reconnect.Rebooting the PC does not help.Rebooting the ERA100s helps, again for a few days. I consider this a workaround.Does anyone have a solution for this?Thanks in advance.

All speakers cut out after about 1-5 minutes if playing simultaneously with sub and beam. I have three Sonos ones, a beam, a sub and one of the ikea speakers. I can play them all with no issues in any combination. However, if played with the beam and sub, the music cuts out. Ive tried every combo and it only happens with the beam and sub (and anything playing the same music at the same time). The beam and sub are typically connected to the TV but this issue only occurs while streaming music. The sub has an ethernet connection and the beam an HDMI. Everything else is wifi.  When the speakers cut out, first the sub and the beam stop first after about 1-5 minutes, then any other speakers that are also playing with usually cut out with a 30 sec to minute delay.  Any help would be most appreciated because the system sounds so much better with the sub (but it always cuts out)!

I've owned this unit roughly 18 - 24 months (one of a pair). I turned it on today after sitting unused for 2-3 weeks.When I first plug the charging cable in I get a rapid blinking red light followed by solid orange light that remains lit. Sonos S2 said the 'battery was depleted'. Is this a battery issue?Should I get the replacement kit or is it now just a $400 hunk of junk?Thanks for any advice.

I changed my wifi password this morning, and went through each of my devices to ensure they were updated with the new password. My Sonos Move is proving to be the only device giving me any sort of headache.I went through the process of changing the network password on the Sonos app. My speaker made the chiming noise, my app prompted me to enter the new password, I ensured the password was correct, but every time I get to the last step, I get an error saying “There was a problem connecting your Sonos Move to [insert wifi name]”. When I click on ‘More Information’, I am being instructed to change my router settings. This is the same router my speaker has been on for a year, and I haven’t changed any settings. The only thing that has changed is my wifi password.What am I doing wrong?