Answered

recently when using Deezer, each time a song ends/begins at least one speaker stops working and starts again about 10-15 seconds into the song.whe I try to disconnect a speaker from the group, it freezes and continues to show all speakers as connected. I have reauthorised deezer, cleared data and cache, rebooted the router, and reinstalled the app but nothing works.

Got a new Wi-Fi setup.  There is a router and extender all with the same network name.  Works fine for tablets, etc.  Three Sonos are near the router and one is near the extender.  the app can usually connect to one version of the network or the other but has trouble finding the Sonos devices depending on which network it uses.  I would have thought that was a fairly standard set up these days but it looks like Sonos struggles with it.  Are they likely to fix it?

I have purchased a Project T1 BT deck and assumed it would connect via Bluetooth to my Sonos Beam and Sub wirelessly. The Bluetooth switch is on but it won’t connect. Can anybody tell me what I am doing wrong or if I need a preamp?Thanks, Luke 

VERY FRUSTRATING.  ALL API ACCES S AND EMAIL IS RIGHT - ALTHOUGH ITS NOT PULLING IN MY YOUTUBE PLAY LIST. 

Hi.I could not find any place this questions where asked,and i might have not been looking hard enough🙃. Anyhow….i got my hands on two used Play1 from different sellers. On arrival i notice that one was in exellent condition,but the otherone you could tell it have been used. A few scratches on top an over all i can tell by the colour it was a bit faded.I set them ut as stereo-pair and try adding them to the Apple Tv….no luck. I learn the hard way that this is some old speakers. Long story short,i have a single ERA 100 witch i connect to Apple Tv over Airplay,and then group the Play1 and turn off the volume on the 100.But when i start listening to the Play1’s i discover that the mor used one sounds different than the prestine one. So i’m interested to hear if anyone have experience bout anyone had to replace their elements(mid or tweeter)….cause of soundquality or if they blew.I can hear clearly that this Play1 is not blown but i can hear things in music that aint as crisp all the way

I have experienced songs starting and moving on only after 10-15 seconds. I’ve investigated different playback methods and found this phenomena happens when applying crossfade. Looks like a software glitch. I’m using Spotify.  can this be rectified? 

Is it possible to have a single Connect attached to a Yamaha receiver that has two zones of non-Sonos speakers and set each speaker zone up as a distinct room that can be grouped or ungrouped with the Sonos app?  We originally setup this configuration about seven years ago and we were able use the Sonos app to group and ungroup the two speaker zones (each with a distinct room name).  We had to take the system apart for house repairs and when I put the system together again I can only configure one room per Connect on the receiver.  Any ideas how the system might have been originally configured?

My Sonos Move will not connect to the wifi all of a sudden and the microphone light is on. I tried the reset instructions in the app with no luck. 

So I designed a small cinema in a house I'm working on which is going to have space for an Arc front facing, 4 in wall speakers- two on each side of the cinema room filling 100% of the room and a space for rear speakers, planning on going with Sonos 5’s as rear surrounds or the Era 300s. I’m confused as to how to set them all up. The number of Amps to be used here isn't a problem. Any suggestions? Much appreciated. thank you

I have a problem I went on vacation in Mexico the house we stayed at had a Sono system I connected to it. Now at home in the USA I bought a Sonos Arc and I cannot login into my account to make changes it shows what must be the email to the Sonos account in Mexico what to do. 

Bonjour à tous je viens d’offrir une enceinte sonos one sl à mon mari. Il souhaitait une enceinte connectée mais je regarde le site sonos et je crains que ce ne soit pas une enceinte connectée je me trompe ? Je l’ai achetée chez Darty et ils indiquent que c’est compatible Alexa et Google j’ai un doute Merci à tous 

I have some newer Sonos speakers (One, Play:5, Arc) and they will play the stations. They all work fine with Spotify and Amazon and indeed normal music from Apple Music. But if I play an episode from Matt Wilkinson for instance the Play:1 units will not make any sound. If I hit the play on the unit it starts / stops music everywhere, and the volume buttons make changes in my iOS app. But no sound. Not sure what to do.

Thinking of a T1 turntable with the Play 5.How are they connected?Can it be grouped with my other Sonos speakers? Thanks 

Making a new thread because none of the existing threads on this topic fix my issue.Got a new Sonos Roam yesterday. Tried to set it up, absolute nightmare (incidentally, all my Sonos set up experiences have been a bit disappointing, which is a shame because once set up, the products are great). Anyway. I can get to the stage where Roam tries to join my wifi network. After a while, it says:The connection to your Sonos Roam was lost. Move your mobile device closer and make sure Sonos Roam is powered on. My phone is right next to the Sonos Roam. There are no issues with the wifi dropping out. When I click continue, it prompts me to receive an audio PIN again (fine) and then when it starts flashing white and green tells me:Make sure the light on your Sonos Roam is flashing white and green, then press the button on it to continue.Light is fine, I press the button, but nothing happens. Eventually, then says:We didn’t detect a button press from your Sonos Roam. Let’s try again. Doesn’t matter

I recently put my small Sonos system in place on our patio: a Roam that lives outside in a dock in the warmer months paired with an Amp that is hooked into to Sonance speakers. Its a simple system and we are really happy with the audio quality from it.The reason we wanted the Roam paired with the Amp was to give voice control to the system. In a paired group we get exactly what we wanted. Only trouble comes when the power goes out, we have to go back into the amp and manually pair the devices again. I have seen a few posts of users with similar problems. Is there some kind of permanent solution to this? Overall we are very happy with our system, this is one of the few frustrations we have had.A couple of threads I saw:Keep device groups after power cycle | Sonos CommunityKeep the group after a power loss | Sonos Community

I am looking on purchasing a Sonos Arc, sub and 300’s for my surround sound solution soon.  I am going from your typical AV receiver to all the speakers via wires.  All my inputs go into my Onkyo AV receiver via HDMI and then one HDMI cable to the TV.I was wondering if I can just remove the speakers from the AV receiver and keep my inputs in place and essentially use my AV receiver as my HDMI hub.  This is mostly because my TV does not have enough HDMI inputs.  I would then use a HDMI Arc connection from my TV to the Sonos Arc soundbar and then of course connect the sub and 300’s via wireless.  Would this work?Devices:LG 60” TVOnkyo receiver (can’t remember the model atm)HD FireStick (primary source for TV - YouTube TV, Netflix, Disney+, etc)Playstation 4Playstation 5Xbox XThanks in advance for your thoughts and inputRob

Hi,I think this might have happened since the latest update but now, when I use one of my battery portable devices off it's charger, the App seems to continuously show it's at 100%. Noticed it with one of my Roams, that I use a lot for listening to podcasts via Bluetooth from my phone. Will test another Roam just to make sure it's not specific to that device.Has anyone else noticed this?  So, my other Roam has just now dropped down to show 99% so seems like an issue with the other one. I will try the other one again later to see if it continues to not communicate it's battery status to the App.  Moderator edit: combined posts

Hi, my Android app, no long shows Spotify and Souncloud, when I do a search  and select artist. Shows my library, but they have disappeared.  Rebooted everything, reinstalled Spotify (just incase) will show artist name in songs only. Only if the have a best of And help please.Michael

Hey all -  Just got my Era 100s and working on setting two up as a stereo pair. I have the line in adapter connected to one and am attempting to adjust the delay setting from 2000ms to 75ms in the Sonos app, but when I choose 75ms, the checkmark just jumps back to 2000ms. I’ve deleted and re-installed the app, power cycled the speakers, adjusted the source level setting, nothing seems to make a difference. 

Since yesterday (potentially linked to Sonos S2 15.2) the two sliders under “Sub Audio” are borked:When adjusting either “Sub Level” or “Crossover Frequency” the other slider follows and/or both sliders jump around.The issue is there on both iPhone (16.3.1) and iPad (16.4). I’ve tried restarting all components, deleting the app and reinstalling it.

Using the Sonos App 15.2 version is not the experience I expected from Sonos. Some of the controls like the Surround Audio sliders are jumpy and can’t be hardly controlled. Sometimes when I control the Music Level slider the TV level slider jumps as well. This happens on other screens like the EQ with the 2 sliders as well.I experience this on my iPad and iPhone (both on iOS 15.4)

Is anyone experiencing issues with crossfading on playlists. Random songs will play for around 10 seconds and then skip to next song. This happens in different rooms when using either Macbook or IPhone. Streaming service is spotify.If so is there a fix or do I need to wait for a bug fix update ?

Over the past month or so I am finding that playlist tracks skip prematurely to the next track when using the Spotify service with cross fade enabled. Tracks pay in full when cross fade is switched off.

Hi,I currently have the following products:Beam 2Sonos Era 300 x2 I can’t figure out the solution to this problem and surprised it isn’t just working. I added my Era 300s individually and grouped them. This works and sound plays when I group the same audio to groups within the same room. However when I use Sonos’s surround feature to add the same Era 300s to the same group as my Beam, it successfully adds them. I can control sound using the app or buttons on the Era 300, however NO sound comes out of the Era 300, only sound comes from the Beam. Any solutions to this? Also when I try to use TrueTone, it fails because the Era 300s won’t omit any sound, this only occurs in this Surround Mode Setup.  I’m playing spotify through the Sonos app and see the correct room selected, but I can never get the Era 300s to play when its added as surround with the Beam in the same Room Group. 

So I understand the Sonos port will allow me to stream music not only thru my sonos speakers but also to my home theater speakers via A/V receiver.  Does the port resolve/eliminate connectivity issues?  I frequently have to unplug a speaker that’s not responding so that it can reconnect.  I do have one speaker that’s hardwired via ethernet to my router but still have connectivity issues...I currently have 12 speakers thru various rooms in my home.