Answered

hoi, Ik heb een Samsung The Frame 55LS03B (2022) en 2 Sonos Play 5 gen.1.ik wil het geluid van de TV over de Sonos Play 5 gen.1 laten lopen maar we willen geen soundbar, is dit op 1 of andere manier mogelijk?

Bonjour,Dans mon salon, j’ai une arc+sub+2 one pour le surround.Je m’aperçois que le sub ne fonctionne plus (il est bien connecté au système salon et couplé, en fonction..., il est bien allumé, l’appli le voit mais il ne fonctionne pas physiquement c-a-d il ne vibre pas).Je pensais qu’il était en panne et je l’ai donc couplet avec ma beam qui est dans une autre pièce et là, il fonctionne.Pouvez-vous m’aider car là je sèche?D’avance, merci.Belle journée. 

Hi guys,I own a turntable (with built in pre-amp), third part speakers (also with a pre amp) and have recently got Sonos. I bought a port because I want to be able to play the turntable music in other rooms.I know i can simply plug in the port line-in to the turntable so the RCA plugs and it plays around the house) but then not over the third party speakers.Is there a way to have the third party speakers still play the record while the Sonos speakers plays it around the house? I thought I’d be able to plug the port into the pre amp on the third party speakers but it doesn’t work. i can’t work it out. cheers

HiOur Kitchen TV is a 32” JVC and the Ray is on offer for £218 on Amazon vs the Beam Gen 2 for almost twice that, plus the Beam is bigger so the Ray would fit better under the TV/Anyway, my TV has no Optical out natively but it does have a Coaxial port called Digital Audio Output (Coaxial).Could I use this? If I am forced to spend another £200 on a beam, I will probably stick with the Ray option and just upgrade the TV to a newer model as its not Smart anyway.Thanks

Greetings,I just bought a Sonos 5 Bluetooth Speaker and I am trying to connect my Audio-Technica (AT-LP60XBT) but they seem not to recognize each other.Are they compatible at all?Am I missing something?Additional info: I have no other pieces of equipment, just the two. I had a smaller Sony Bluetooth speaker that worked pretty well but I was hoping to increase my sound.

I’m looking for a new set of speakers for my Sonos Amp.  The amp says speakers should be at least 125W for 8 ohm speakers, and at least 200W for 4 ohm speakers.  The R3 Metas are 4 ohms nominal.  110 db max output, 15-180w amp requirements.  Will there be any issues with this setup?

Hi All,I just installed my Era 300 on the Sonos wall mount upside down option.My question is if there is need to be a gap between the wall mount and the era 300 - please see pictureHow far should the brads be screwed and how much space should be left On the one hand I can tighten the screws more and on the other hand I don't want to do any damage…Any feedback/experience from the community with that case?Raz 

I have a Sony A80L connected to Sonos Arc.All works well, except, when I try to switch to TV Speakers, it switches back to ARC after a few seconds.How can I keep TV speakers in use rather than using ARC for occasions that I want to switch ?Any advice is greatly appreciated.Regards,Sam

Hi! I connected my Safa retro KT-3001 to Era 100 via the RCA line and adapter.I tried to understand if this model has a built in preamp with no success.Now that I connected the sound sounds ok, with about the same quality as with the built in speakers of the turntable.When I play the same song from spotify the sound is so much nicer!Now, I wonder if it’s because of the turntable itself, or do I miss a preamp? 

Our system is all the sudden cutting in and out.  Speakers show up, play, stop playing and disappear randomly.  I have 15 SONOS products and this is annoying.  Any ideas?  

Hi,I have 4x zp120 amps.My booster is hard wired in to the router. 2x zp120 amps are in the same storage cupboard as the booster - no issues with connectivity.2x zp120 amps are in a cupboard further away. They are both stacked on top of one another. 1 of the amps has connected to my network. The other won’t connect. I have tried doing a factory reset (4 times). I have also tried resetting my router & booster.These ideas aren’t working.If connect these 2 amps together via Ethernet cables, would that help me? Thinking that the one struggling to access the network could then piggy back on to the one that is successfully on the network??!Thoughts, help, comments are all welcome!

I just got my Sonos and it cuts out after a minute of playing, is it a blue tooth wireless speaker or does it need an Ethernet cable?

Help please! My one sl’s aren’t working as surrounds when tv mode. The beam work but one sl’s don’t. That stopped working a week ago. The precious 3 tetras they’ve worked together perfectly. the one sls do work when playing music which confuses me even more. anybody else experienced this issue. Thankyou. 

Is it possible to use the speakers without wifi?

All speakers visible and selectable, but I get the message, “unable to connect please try again later” for some speakers.  

Hey all, I'm trying to connect my old Sonos Playbar (it's quite an old one, possibly 2013) to a Kogan 55" Smart TV (Series 8 LU8010). I've setup the Playbar and it's working while streaming Spotify from my phone through the app, but when I try to do 'TV setup' I get a 'no signal detected' error'. I've tried doing the old, unplug and plug it back in with each connection and also tried a few different settings on the TV itself. TV settings are pretty basic, but I've stripped it back to standard audio, balance 0, auto volume level off, surround sound off, S/PDIF Mode PCM (which I believe is the correct output for the Playbar. Anyone have any ideas? I've thought about getting a new optical cable but wanted to try here before I do that.

Hi.I haven't played a blu ray disc for ages however when I did so a few days ago I was curious as to why when I rewound the film (to go back to a specific scene), I lost all sound from the Sonos Arc.The only way I could get the sound back was to stop playback and restart the player again.Any idea why this has happened?I think my sound bar setup is ok as the sound format within the Sonos app is Dolby Atmos.I also have another problem relating to the picture, namely, every few seconds I get a screen judder which only lasts a fraction of a second but repeats itself every few seconds.

Can I use my sonos on Bluetooth, ie no Ethernet connection?

How do I turn on all of my speakers at the same time?When I turn on my tv, my soundbar & sub woofer (gen3) power on, I have to go to my Sonos app to turn on my (2) era 300 speakers.

Haven’t been able to see full list of SiriusXM favorites in the Sonos app for what seems like over a year. I’ve tried reauthorizing the channel, deauthorizing and then adding back, resetting speakers, etc. Nothing has worked. Any suggestions?

Playing live radio....... Especially BBC News Live Radio 5 & Radio 4Can play smooth radio but live BBC  WHY?????????????????

Hi allI have a multiroom system consisting of;Family Room: Arc connected via ethernet to network and via HDMI to Samsung TV. Also 2 x Symfonisk connected via WiFi acting as rearsKitchen: 2 x Symfonisk connected via WiFi acting as stereo pairLiving Room: 2 x Symfonisk connected via WiFi acting as stereo pairAll of these speakers are linked to Google Assistant accessible via Nest Hubs & speakers. I do not have Google Assistant enabled on the Sonos Arc.The Family Room is exclusively used as surround sound for the Samsung TVI usually control the other rooms via Google voice control (eg, "Hey Google play my rock playing on Kitchen"). This works fine and I can easily skip tracks, pause, stop and control volume via voice commands. If I wish to search for something specific I can bring up the Sonos app on my phone (Samsung S22 Ultra) or tablet (Samsung Tab S5E), whichever is closest to hand.For the past few months, my S22 is unable to find my Sonos system, and it appears greyed out in the

I just set up a new Sonos system (Beam gen 2 + Era 100 surrounds) connected to a new LG C3 TV (65”), and while things are mostly great, my Nintendo Switch seems to cut out for a second every few minutes. Some searching around here and reddit shows some posts from years back with similar issues, but seem to be blaming it on some software update that seems irrelevant today. my setup:65” LG C3 TVApple TV on HDMI 1 (and has thus far been fine, generally playing Atmos content)Beam gen 2 on eARC HDMI 2Nintendo Switch on HDMI 3Xbox Series X on HDMI 4Era 100 speakers as rear surrounds (though this problem existed before I set those up)TV set to "pass through” audio, to use eARC, and the audio output is set to “bitstream"Nintendo Switch set to “Surround Sound”, which I believe sends 5.1. Sonos app claims it's getting “Multichannel PCM 5.1"Sonos firmware 15.10LG software version 03.20.17 The drop outs don't seem to have a super consistent pattern. They could happen once every five minutes, or th

I want to buy a pair of Fives for my room. They’ll be linked/paired as a stereo pair. Can I connect them to a Roam device over WiFi and play music from them via Bluetooth through the Roam (using the Roam as a gateway)?  E.g. I want to stream some YouTube music from my phone. I would stream it via Bluetooth to the Roam and then through that to the Fives. If not, I guess the only way is to plug in a Bluetooth receiver via the line-in connection?  And if so, could I do that and still have the music play over the linked pair?