Answered

Hi, I got a Sonos One, set up the app, connected Tidal, all works great.Is there any way to get autoplay to work through the app? Normally, when you finish a playlist on Tidal, it switches to “track radio” and plays continuously . Can’t seem to find this option though the Sonos app. Thanks

I have a Sonos Arc with IKEA back speakers.  Will the new Mini Sub work with this arrangement?  I have a fairly small living room.  Probably a stupid question but all of the information I see references the ‘smaller’ sound bars.

Evening folks …. this really is Sonos development week for me. Thanks to all those helping me sort nearly half a dozen issues this week. And some days to go yet 😀Just firing up my Roam to check all well for a trip next week. Playback of music sources all seem fine (Amazon / Tidal) and also Audible. But TuneIn only allows selected channels to play best I can see.BBC World is fine, Kerrang is fine. But BBC Radio 4 or Radio Shropshire for example, shows the channel graphic but zero audio output?Checked it’s up to date but otherwise I’m at a bit of a loss as to why. Not a frequent radio users and indeed only added the TuneIn service to the app yesterday.Grateful for any direction why mainstream channels so not appear to be working.Plan was to take this for a lengthy trip and run it off mobile. I was only testing Norton VPN to see if that was working ok and then found this one.EDIT: Just continuing to look at this and it turns out it’s not just the Roam but all my Sonos devices not seeing

Getting my money’s worth today …. third post 😀Have a sub that I’ve owned since new (think a gen 2) and has worked perfectly to date.But I did a few component move arounds and this one previously doing duty in the kitchen was moved to the hall ….. the kitchen redecoration lent itself to a new Gen 3 in white.Came to connect it up just and it works but dropped in and out on initial playback then dropped out altogether when I moved it to its side. I reset it and added it again upright and seems be working fine now. But I wondered if it was good practice put it on its side or if there was a sensor that cut it out when not upright?Reason to put it on side was purely cosmetic as it fitted under a footstool. That proved to be also a bad idea on a wood floor as the limited time it has sat there, it sustained surface scratches. But surprised it prove be a problem operationally on it’s side …. or am I convincing myself of mixed facts/circumstances?Nothing unusual about the unit save to say that

Does anyone know if Sonos make a case for the Roam? (When travelling with it, a protective case would be really useful)

I understand that using a Sonos Connect to play my turntable to the Sonos Arc is a cheaper than using the Port.  But, will I need a pre-amp to use the Connect or the Port.  My turntable is an older Sherwood turntable.

I am based in the UK and have my Sky Q hdmi output connected to my Hue Synch box, which is then connected to my LG 65inch OLED TV. All is working fine until I plug in my Beam via the eARC HDMI output. Plugging in the Beam causes the synch box to keep crashing. The only way I can use them both together is to have my Beam connected to the optical output from my Sky Q box, losing the Atmos capability. Surely as most of the UK uses Sky we should not be getting this conflict. I am not sure what the Beam is outputting that causes the issue.    

Hi I have 2 NAS drives at home and have connected them to the Sonos. I can see the folders, tracks etc however they will not play through the Sonos app (These are MP3 format). Has anyone come across this and is there a fix?

Hello. Could anyone in the know kindly advise what the Sonos sub mini box dimensions are and what the shipping weight (with packaging) of the set is please? I'm trying to assess shipping costs/options. TQ.

Hi! I’m trying to add a Connect Amp as surround speakers for Playbase. The problem is that my router is upstairs, i.e. nowhere near these devices. My question is can I wire the Playbase and Connect Amp via Ethernet cables to router 1 that sits downstairs but isn’t connected to the internet AND have the devices use router number 2 upstairs for wifi and Internet access? As far as I know, using the Connect Amp for surround speakers wouldn’t need internet access via the Ethernet cable, just the signal from the TV via TOSLINK. But then I could play music off the Internet via wifi when needed. Is this possible or a pipe dream? =D  

HiI am facing strange issue with DHCP. In my network i have two piholes running as DNS and DHCP server. All clients seems to be ok with this setup except sonos devices (arc, sub and 2 ikeas symfonisk)Devices simply refuses to accept offered ip address. Here is the example of communicationSep 28 23:04:53 dnsmasq-dhcp[957]: DHCPDISCOVER(eth0) 54:2a:1b:65:67:14 Sep 28 23:04:53 dnsmasq-dhcp[957]: DHCPOFFER(eth0) 192.168.2.31 54:2a:1b:65:67:14 Sep 28 23:04:53 dnsmasq-dhcp[957]: DHCPREQUEST(eth0) 192.168.2.31 54:2a:1b:65:67:14 Sep 28 23:04:53 dnsmasq-dhcp[957]: DHCPNAK(eth0) 192.168.2.31 54:2a:1b:65:67:14 wrong server-IDIf i disable one of those DHCP server everything works as expected.DHCP servers have the same static leases and of course dynamic ip ranges does not overlap.I think that for some reason sonos device doesnt expect to get 2 ip offers at the same time and replies with “wrong server-id”Can you please let me know if this is something that can be fixed.Thanks & RegardsMichal

Hello,When using my spotify on Sonos, my music keeps skipping tracks or stopping completely. The strange thing is, if my wife plays the same spotify account on Sonos from her phone, no issue. Only when i press “play” on my phone does the issue occur. If i use “Sonos radio” from my phone, no issue. We have two spotify accounts connected and I have tried toggling between both from my sonos app on my phone without luck.Given the information above, i would think to rule out internet speed/connectivity (since everything works fine on her phone) and also any spotify account issues (since these also work fine from her phone).  Thoughts?

I have a full home Sonance in-ceiling setup. 4 zones each using 1 Connect each. Recently one of those zones stopped functioning properly.The zone has 2 in-ceiling speakers. Max volume has always been limited to 85% so don’t see how it would be a “blown speaker” issue.When I turn the volume all the way up (so 100% of 85%) I can hear music playing very softly on both, almost like it’s at 2% volume.Every other zone is working fine. I disconnected/reconnected the power and outputs from the Connect but that didn’t solve anything.Not sure what to try next. Obviously with the system/speakers being in-ceiling its not going to be easy to follow wire terminations, so hoping it wouldn’t be that.

SiriusXM alarms quit working today. When I try to start a channel none are listed and it shows unable to browse music. Also my SiriusXM account is greyed out when I look at the. diagnostic 1131391212

Hi,Reasonably new to this, so please be patient. 😎I have just upgraded from a Playbar to the Arc, which obviously leaves me with what to do with the Playbar.Where the Arc now is I currently have 2 Play 3’s used as surround sound.However, in the room I am thinking of moving the Playbar to I have two ones.My question is am I better moving the Ones to match up with the Arc so that all the latest items are together, for best sound, or am I best leaving the 3’s where they are as I presume they are more powerful?the next question would then be if I set up the Playbar with the Ones, would that stop them from being able to play in Ulta HD on Amazon music, as the Playbar isn’t up to it?Hope this makes sense

Hi all ,Im looking to purchase my first ever sonos product .im looking for a great speaker to listen music at home. As a family we always have the music on and I think a sonos setup would be great. I was thinking about the sonos one speaker ? I’m weighing up whether getting the latest generation or two older generation sonos ones? any advice greatly appreciated 

Hey, I’m just looking for advice on height audio settings for my room. My ceiling is probably 8-9 feet from the ground and I am seated 8 feet or so from my Sonos ARC. My ARC is 2-2.5 feet from the ground also. Also any advice on how to true tune properly would be appreciated. I watched the video on the app of the lady moving her phone around and videos I’ve found on YouTube vary slightly from how the sonos setup video depicts. Thanks everyone for you’re input in advance.

 Hello.I need to connect the arc soundbar, the Sub (Gen 3) and 6 Sonos Architectural by Sonance speakers and TV. How many AMPs do I need?Thank you

Hi everyone,I'm facing big problems with dolby surround recently - it seems to be connected to the 14.16 update. My livingroom setup contains a Sonos Amp with 2 Stereo speakers connected and 2 Play:1 as surround speakers. Since today (apparently the auto-update ran earlier this morning) the Dolby Surround output does not work anymore. Sound is only coming through the 2 analog stereo speakers in the front. In the past 5.1 sound was distributed correctly between all speakers (as in the setup there is no "center” the center channel is divided to the two fronts)I did a surround channel test using an XBOX Series X and could confirm that only the 2 front channels are working. When it is supposed to play the center, rear, or sub channel the speakers remain silent. This is only happening for Dolby Digital - the surround test for DTS is working as expected, all channels are active and the center channel is distributed to the two fronts.Additionally, the S2 App shows "Dolby Digital 2.0” as input

My Roam has stop working - I tried to reset - reboot but nothing happens - 

Hi, just bought Sonos One SL Shadow Edition. Trying to find out the manufacturer date or if I have airplay 1 or 2 serial A201 2207CP [Redacted]

Hey, what is the secret to streaming podcasts on a Sonos speaker.  I have added Spotify already and I’m able to play music just fine because songs and/or artists come up in the Sonos app search on the , no problem.  However, if I wanna stream a podcast on my Sonos and do a search in the "podcasts & shows" on my Sonos app none of the podcasts in my Spotify library come up.  What is the secret here?  I used to listen to podcasts on Sonos all of the time. Please advise! 

Hi,I’m implementing my own SOAP Webservice based on the provided WSDL. At the provided WSDL the trailing slash is replaced by a # before the action.Ex.: http://www.sonos.com/Services/1.1#searchAt my implementation the action URL si the followingEx.: http://www.sonos.com/Services/1.1/search So the calls to my SOAP Webservice fail with the following error:System.Web.Services.Protocols.SoapException: Server did not recognize the value of HTTP Header SOAPAction: http://www.sonos.com/Services/1.1#search. I’ve already added my custom music service to the device at the APP but I get no calls to the API My Web Service is implemented with C# ASMX

I have 2 Play 5s (first generation) I can use each one separately, or grouped with my Playbar on the S1 app, but when I try to create a stereo pair i get past pressing the volume up button on the left speaker and then geta message saying “There was a problem creating the stereo pair. Please try again”Any ideas what the issue could be? I can’t figure it out as both units work independently and also when in a group, but if i try to group the two 5s together, it doesn’t work.

I disabled the WiFi on amp (since its plugged in ethernet) but when I do this the sub stops working on WiFi.Do both have to be either on WiFi or ethernet in order to work?