Home theater

Hi all, Does anyone know if the above exists? My tv does not output 5.1 via optical when the input is via the HDMI ports. I have my xbox and now a Chromecast connected to the tv. Up til now i was using an optical switch box with inputs from the tv and xbox to the playbar....but now i need to extract the sound from the chromecast as well to get its 5.1.... which is all well and good but I'd rather not have to still use the current optical switch box to get the internal tuner audio from the tv to playbar.… I hope this makes sense to someone who could advise. Appreciate any advice greatly. Rather not have to get atv just yet. Tia. Rob

Has anyone connected a Beam to an LG OLED tv and tested whether the audio is delayed when using Dolby Digital? My Beam is scheduled to arrive tomorrow (canceled my B&H order and ordered on the Sonos site today). I have a 2016 LG E6P with the latest firmware (5.30.30). I wasn't aware of the Dolby Digital issue until I started reading these forums. I have read and watched a bunch of reviews of Beam and no one mentioned this issue, which is curious. You would think at least one reviewer would have used an LG OLED when testing the Beam. Hoping it won't be an issue.;)

Good afternoon, I have an LG OLED TV (B8) connected by digital optical to a Playbar. I then have a sub and two Play 1s for 5.1. This was working fine but recently has only sent stereo to the Playbar for a little while. I am a little stuck resolving this. I am using Plex, Netflix and Amazon Prime Video both on the TV apps and a Firestick. Is this something that has changed? I’m guessing that Netflix 5.1 may output in Dolby Digital Plus and the TV may not be downscaling it well.  Before I start pulling the system to pieces, I just wanted to check that something hadn’t changed firmware wise within Sonos that is impacting 5.1. Regards

I own a Beam. It's works alright, but I do not have other Sonos speakers to group with it. All other wireless speakers are Amazon Echoes (separate topic). In another room, I have an Onkyo powered Home Theater with true 5.1 surround playing out of 5 separate Boston Acoustic Speakers and an SVS subwoofer. Seems like it would be a no brainer to play the same music on this system as the Beam (when I'm not using either one for watching movies of course). I do not want a Connect. The Amp and Playbase combine the three front channels into one speaker...boo! I understand the 75ms delay. So... Why doesn't Sonos get into the Home Theater receiver market by creating a receiver that could solve all of these issues/use cases and rake in a bunch of money?

I have read that all Sonos speakers will connect to wifi for them to work. I setup two Sonos Ones as surround for my Beam and they have been working flawlessly.   Today, I was watching a movie from a file saved in a USB connected to the TV. I was getting 5.1 sound and surround was working great. And then my partner unplugged our router accidentally, however the surround continued working. We left the router unplugged so there was no wifi at all - but the surround was working flawlessly.   So does this mean that the Surround Ones are directly connecting to the Beam? And not the wifi?   My beam is connected to the TV via Arc. And is NOT in boost mode (no ethernet connected). 

I Recently Added a Sonos beam to my Toshiba fire TV. It’s working great but the volume control randomly appears and disappears on the TV screen even when nobody is touching the remote. How can I make a stop?

How do I connect  my Beam to my home system sub that is currently part of my overall home system through a Sonos connect amp but is a non Sonos sub?

I’ve made numerous attempts to set up my neighbours Sonos system and remain frustrated by the surround sound set up in his lounge. He has a Sonos Beam and two (first gen) Sonos 1 speakers.  All his Sonos System works through his Sky Wifi network.  His (LG) TV is a current model and the sound is supplied to his beam through HDMI-ARC. I can set up the surround sound system with no problems.  The Lounge speakers show as a beam with +LS +RS.  The system works fine for a short amount of time and then the rear speakers stop working and show as ? ? in the room set-up.  After a few days the two rear speakers can be seen as individual speakers (rooms) on his sonos system (ie detach completely from his beam). Recently I have split his Sky Wifi into two wireless networks (one 2.4 and one 5 Ghz) to make sure his Sonos system stays on the 2.4 Ghz network.  This seemed to have worked, however he tells me the rear speakers have yet again dropped off the system. I’m afraid he doesn’t have a Sonos Brid

Before you buy any SONOS equipment to achieve a 5.1 setup please consider this: a Denon AVRX2400 AV Amp, Elac CINEMA 5.1 speaker system, all cables professionally installed behind the walls gives you true home cinema with all the surround sound codecs you could ever want with no cables showing for way less than £1000 (see Richer Sound web site for prices). Or spend £1700 on a SONOS setup and get stereo or Dolby Digital only plus you may have to buy a new DVD player to play your UHD DVD’s, a HDMI Switch then deal with lip sync issues etc, etc. SONOS do speakers, great speakers, but only for music. They are stealing money from people wanting 5.1 for their TV. The system I suggest costs at least £700 less, hides all the wires (what we all want) and sounds much, much better. Go mad, stick a couple of speakers in the ceiling and get real Dolby Atmos for £150 more and still save yourself £550. I have begged SONOS to tell me if they are developing a surround sound product with HDMI and mo

I know versions of this question may have been asked before, but I have a Playbar and just added two Ones and also just bought a new TV and was excited about having surround sound, but then realized that I just have stereo sound instead. Is there a TV that will push Dolby Digital to the Playbar through the digital optical cable - OR - is there an adapter I can get that - without noticeable loss in sound quality - can get my new TV (TCL Roku) to push Dolby Digital to the Playbar? Like maybe an adapted that goes from the digital optical cable to HDMI into the TV? Really blown away that this is something I now have to worry about with how much money I’ve spent with Sonos. 

Im going to by a Sonos Beam and have a question about connection and control of sound via Virgin remote.   I have an old Philips TV that does have an HDMI/RC port but my Virgin box is connected to this and doesnt work in any of the other HDMI ports. I control the Tivo box and volume via the Virgin remote.If i connect my new Beam via the Digital audio out will i lso be able to control the Beams volume using the same remote? Thanks for any help  

Hello all,    This drives me absolutely crazy and I don’t know why I am having this issue or how to fix it. So in my living room I have a full 5.1 set up - I have a beam, the sub, and stereo paired L and R Sono’s ones.    I have the beam plugged in via HDMI/ARC to my tv. On tv itself I have my settings set to bitstream for the HDMI audio format and then the audio format set to Dolby Digital. However whenever I check the audio in on my beam on the settings within the Sonos app it says Dolby Digital 2.0. What gives?   When I stream digital movies via the vudo tv app I check to make sure they are Dolby Digital Now I do hear sound out of the stereo pair speakers and the sub is producing bass for scenes but I dont understand why my app doesn't show 5.1.   then however when I watch something stupid on cable that I am sure isn’t 5.1 it tends to show it (I also have my cable provider settings set up as well.)   So basically I am just curious if anyone can help me on my it says 2.0 when it shou

Does any one know the type and size of screws that secure the beam to the wall mount from the bottom of the mount?  I just found out today (after the beam fell off the mount)  that the electrician who installed the beam about 6 months ago did not secure the beam to the mount.  I threw away the box many moons ago. 

Alright, not sure if anyone but me wants to do this, but I want to be able to turn off my Beam and paired Ones. I do not always need surround sound. Is it possible to turn the Beam and Ones off, and just use the factory TV speakers?

Is there really no way to turn off the Beam without unplugging it and then having to set it up again?  Is it sucking power/energy when it isn’t in use?   I just bought the Beam but will return it if the answer to this  - it can’t be switched off and is drawing energy when not in use.  What kind of product manufacturer designs something without an on/off button?!?

Every time I turn on the Apple TV, the audio output defaults to ‘HDMI’ which is the Apple TV itself. I have to switch it to Sonus every time. This is annoying. Does anyone know how to get the apple TV to automatically default to Sonos for audio output?

This is terrible, surely there is some solution here?TV is a Philips 65PUS7303/12 65-Inch 4K Ultra HD Android Smart TV , and it's set up with a Sonos Playbar, Sonos Sub and x2 Play Ones.I'm now in a situation where seemingly my TV is putting out better sound that the 2000 euro Sonos set up. Will something like this work?https://www.amazon.co.uk/Extractor-Support-TOSLINK-Optical-1-HDMI-4K/dp/B06XFZXTYW/ref=pd_sbs_504_3/257-5953424-6042842?_encoding=UTF8&pd_rd_i=B06XFZXTYW&pd_rd_r=94e64acb-0e5e-44a6-b282-1bb153f122d5&pd_rd_w=HxgJp&pd_rd_wg=GjOmS&pf_rd_p=cc188cba-1892-42b3-956f-6c67d0ab7a00&pf_rd_r=586C298S0NJW05Y9J1JW&psc=1&refRID=586C298S0NJW05Y9J1JW

Hello all - wondering if its possible to use a Beam with a TV that has not HDMI Arc or Optical Digital output?

Hi, i have just bought a 2019 Samsung QE55Q70R TV, and am thinking of buying a Sonos Beam to go with it as I already own two Sonos One’s Gen 2. I see a lot of people in the community have been having issues with lip sync and connecting the Beam to Samsung TV’s. Can anyone please confirm if the Beam has any compatibility issues with the TV I have just bought? Anyone using the Beam with this TV? Last thing I want to do is spend money on some thing that isn't going to work as it should.Regards, Mark.

I’m using projector and an Apple TV HD (4th gen) for movies and streams the audio to Sonos with Apple Airplay 2. Using a pair of Sonos ones and a Sonos sub. It almost works but I’m experiencing some issues: 1..every time I turn on the Apple TV I need to select the audio output to Airplay 2. But only if I’ve listened to music on Sonos in between. If I haven’t listened to music then the Apple TV plays the audio on my Sonos correctly next time I turn it on.m 2..Sometimes the Audio get distorted in the middle of a movie and I get an echo-like effect. If I pause the movie and press play again the echo effect is gone and the audio sounds fine. 3..if I watch a movie on Netflix or HBO, and then play something on YouTube afterwards, then there’s no audio playing on Sonos. I then have to manually go to th Apple TV settings and deselect Apple airplay and then select it again for the Audio to work. Does anyone hav a similar setup without these issues? Would replacing my Apple TV with a Appl

Hi all, I’m not really great with technology and would want to confirm something regarding using a bluetooth receiver that’s connected to my Sonos Playbar. Problem: I want to allow certain music/videos from my phone/laptop to play on my Sonos speakers using bluetooth. I have a Playbar, Sub and Beam in my living room which are all grouped together. Am I able to purchase a bluetooth receiver (something like this from Amazon: https://www.amazon.ca/Lossless-Bluetooth-Receiver-Optical-Coaxial/dp/B01G5AMGR8) and connect it to my Playbar using optical to optical? I can easily have the bluetooth receiver plugged 24/7 beside the Playbar so that it’s always available. The bluetooth source (phone or laptop) will always be close (within 10 feet) to the bluetooth receiver. Some of the discussions in the community sort of relate to this but they are either old or not exactly what I was looking for. I’m just wanting to be 100% sure before I purchase anything. It would be much appreciated. Thanks in a

As it says in the title. Just replaced our Playbar with a Beam to get the Airplay 2 fun working. Sounds great EXCEPT, every few minutes the audio goes silent for a second or two. I've only tested it extensively with our Apple TV since it was installed yesterday. The source is coming from the direct HDMI in using an ARC output on my Vizio P-Series. Anybody else having this problem? Is it the Cable? A Codec? The Beam itself?

I connect my Sonos sound bar using optical cable to a TCL Roku TV. I can't get the tv remote to control the sound on the bar. I was able to do it with my previous Samsung TV. I tried the remote control settings in the sonos app but its not recognizing the remote when I asked to hit the volume + button. I also tried using an optical to HDMI (ARC) adapter that came with my beam (in the other room) and then adjusted the CEC settings on the tv, but it doesn't recognize the bar that way. Any suggestions?

I have a sonos beam, 2 sonos 1 set up as surround speakers, and a sonos sub, but no matter what I do I can’t get any sound from my sonos 1’s. My beam is connected to my samsung TV via a HDMI to the ARC HDMI input into my TV.  I do not have a set top box, my TV is just connected to an aerial. I also have an apple TV 4th gen, connected via ethernet to my router and by HDMI to my TV and a sony Blu ray connected by HDMI to my TV.   Not matter what I play I cannot get any sound from my sonos 1 surrounds, even when I play spotify over the surround system, no sound comes out BUT I know they are connected because I can use the volume buttons on the Sonos 1’s to adjust the sound.  I recently moved to Sydney from NZ and this set up was working fine (the only difference is that I had a settop box in NZ, but with freeview here and netflix and Foxtel Now, I don’t really need a settop box) I would have thought that playing a blu ray disk would give me surround sound but still no lick.   Can someone

I have the beam connected through HDMI ARC, went into the Bravia settings and enabled Bravia sync, enabled the device, tv stated it was switching to external audio. Still no sound out of the beam. I’ve read other people fixing this just using Bravia sync enabled but that didn’t solve the problem for me.  Any advice?  Thanks!