Components and Architectural

Probleem:Televisie kijken: Niet OK => Regelmatig valt het geluid ongeveer 1/10 seconde weg bij of de playbar of een van de Play 1. Vooral bij muziekuitzending is dit zeer irritant omdat je naar "hakkelend geluid" luisterd.Luister ik naar Spotify dan werkt de Sonos primaInternet: Delta Glasvezel abonnement 150 MbitRouter: GenexisPlatform Lunar. Productnaam: Platinum-7840zowel op 2.4 als op 5 GHzDecoder: AminoFirmware: 20.1.82.0.10Software versie: 3.4.2Audio Sync: 0Scart Modus: CVBSHDMI CEC: uitgeschakeldSonosKeuken: Play 1Woonkamer: Playbar + SUB + 2x Play 1 (5.1 system)Sonos OS: S2 build 60381140Playbar bekabeld aangeslotenAudiocompressie: ongecomprimeerdAansluitingDecoder is aangesloten via een HDMI kabel op een "gewone" HDMI poort op de televisie. Dus niet op een HDMI ARC ingang.De televisie is middels een optische kabel aangesloten op de optische ingang van de Sonos Playbar. Tevens al geprobeerd om de optische kabel vanaf de Sonos rechtstreeks naar de decoder te leggen.Diagnostis

Have a Playbase, had no issues with it and it suddenly won’t connect to WiFi anymore. I’ve submitted a diagnostic. The number is: 1172428177

I have 13 speakers and was using Smartthings Classic app to control remotely. I turn on music from work for the dogs. Now with the new smartthings app I have lost connection to all my speakers. I think it is due to Sonus running on 2.4 and smartthings hub plugged it to router running 5. Any ideas or thoughts?  Smartthings does not find the speakers. 

I’m trying to add a connect amp as surround speakers, with Amp as main speakers - but when getting error message ‘two compatible Sonos speakers are required’. There is no option to add the connect amp.  Using Sonos 2 app 

I have just upgraded from Ubuntu 19.10 to 20.04  on my server that contains all my music and SONOS was unable to find my samaba share. After almost a whole morning of trying to figure it out I checked out the release notes for 20.04 (which I should have done in the first place) only to find that the new version of samba used explicitly disables SMBv1. SONOS only supports SMBv1. After some more trawling of the net I found that adding the following line to the /etc/samba/smb.conf file, in the [global] section;      server min protocol = NT1 and restarting samba with the following command;      sudo systemctl restart smbd.service my server started talking SMBv1 and SONOS could connect. I hope this will save someone the time I wasted to fix the issue   Jim!

Bonjour, mes musiques sont vues par sonos, elles sont stockées dans le fichier musique au format reconnu par sonos. Si je les retire sonos le voit. Quand je veux lire une musique, un message m'indique que la musique n'est plus dans le fichier de stockage, ce qui n'est pas le cas. Que puis-je faire. Dernière appli sonos utilisée. Merci

Access denied on Apple Music .  Was chatting with support and they could NOT figure it out so the rep just disconnected the chat.  Frustrating when you spend the money and get little support 

Siriusxm stopped loading on sonos app. Have been using well over a year. Yes, my subscription on Sirius is up to date. I deleted SiriusXM app and reloaded. Says my credentials are incorrect and they are not. Any suggestions??

Hi, I have two Sonos One and A Sonos One SL which ago worked together (fairly) happily with the Virgin  SH3 router.  Iv added a Symfonisk book shelf speaker and now have to reboot the router EVERY time for the Sonos app to recognise any speaker.  Any suggestions on solutions!? Cheers 

I have been trying for four hours (FOUR) to update my sonos system. I am on terrible and slow internet (throttled verizon mifi/wifi hotspot) and the Sonos update system seems like it was designed for high-bandwidth connections only. I am so frustrated with the software -- and by extension -- the hardware because of this issue. My internal-only wifi is rock solid (mesh network with like 6 eero devices). It’s only the connection to the internet that’s bad. It seems to me (I have been a technical manager in software) that the update package should be a one-time download, then the rest of the work of deploying the internet could happen on LAN, but the update process seems very fragile and seems like it needs regular upload/download connectivity to the internet. Sonos really needs to investigate why an update that the app says should take 2-3 minutes is for me taking hours and hours and multiple retries. What’s worse, none of my speakers are usable right now because the update keeps failing

Approx once a week my system loses contact with my wi-Fi.all other components on wi-Fi work ok iPad etc.Virgin wi-Fi is connected, wired, to my beam as it is closest unit to router.fed up with turning router off and on, after WiFi has reset Sonos system then resets and is fine till the next time.any ideas. Thanks 

Hello new to the forum.  I have a Samsung TV Xfinity X1 system and the new XR15v2 remote.   If I press MUTE the play bar mutes but does not stay muted.  If I hold the MUTE button down it will MUTE but only because an accessibility dialog box pulls up?  Comcast had not advice.   The App Mute feature works fine so not a play problem unless the commands are wrong for the xfinity remote?   Steven  

Contact tussen ziggo afstandsbediening en playbar valt ineens weg en laat zich niet herstellen

So, using Connect for a while works great.  Then occasional thumping started coming through my amp, and blew the woofers on my beloved Definitive Tech speakers.   Isolated the problem, with new components, and it’s definitely the Connect causing the thumping - after it’s on for an hour or so, rhythmic loud thumping every 30 seconds or so. Running Sonos2, Spotify, all wireless, up to newish iMac / Samsung S10, running through a PrimaLuna tube amp.

Seen this issue multiple times now, and it seems like it is on the Sonos Side of the house.  I use an 2nd Gen Alexa to control my 5 speaker (via the auxiliary input).  Occasionnally (several times / week) the music audio simply stops.  The Alexa is still responding but you cannot hear her responses and you cannot hear the music that is playing.  There is an easy fix that I’ve found, in unplugging the auxiliary input from the Sonos, wait a few seconds, and plug it back in.  When I unplug from the Alexa side, the music starts to play via the Alexa (so it was playing all along).  When you unplug from the Sonos and plug back in, it typically starts to play again.  Once I had to power cycle the Sonos to get the music started again. I’ve seen this issue streaming both from Amazon Music and also Sirius XM Streaming (not sure that it matters, but as a point of reference).  The 5 is an excellent speaker and I love the volume of music and tone, absolutely love the purchase and experience.  Thank

I’ve read a few posts about Playbase dropping off the network; mine is out of warranty now and I’ve done all the usual reset etc… seems this is a common issue.My solution was simply to buy: Vonets Wireless Mini Bridge dongle, WiFi Bridge Cable Convert RJ45 Ethernet Port to Wireless/WiFi Dongle Cost £15 GBP, worked a treat; no need to take the Sono to bits or the hassle of sending for fix. Hope that helps anyone else with the same problem.

Hi: Im getting an error when trying to play music from the Sonos S1 app or even from the Amazon Music app,  the message i got its something like:“The’re an error establishing conection to ****.cloudfront.net”

I am using Sonos at home and in my office - when I go from one network to another, the previous network’s speakers are showing for many minutes, until the list is refreshed.  This wasn’t an issue a few months ago - I do this switch every work day, and now it has become a problem. I can’t find a way to force a refresh of devices. Very annoying - Even if I have been on the network for a good while (hours), and open the app, the list is still showing the devices from my previous network.

Hello I’m from France, sorry for my poor englishI’m using both music services since a long time and i have an issue only since few weeks .When i’m playing an album or a track, after few seconds or few minutes, the sound comes back on my TV. Sometimes i can play a whole album and sometimes even not a sinle trackThis is very very annoying Can you help ? Thanks  

When trying to find a radio show on Apple Music, the list of shows returned is too short, so it is not possible to find all shows.

I have LOTS of Sonos speakers.  I’m in a 18’ wide, 4-story (including the basement) detached house in NYC.  It’s not a big house.  There are speakers in both rooms on the 3rd floor, 2 out of 3 rooms on the 2nd floor, all 3 rooms on the first floor and the basement.  The way I figured it, the Sonos mesh network would work very well in these circumstances, but I have not found it to be solidly reliable, especially when playing in multiple rooms. Some days it works pretty well, but some days (like last night) I can’t seem to get it to play a single song without drop-outs and failures.I do have older Sonos units (Play 5, Play 3, Sub) and I wonder how good the Sonos mesh network actually is.  I have a TP-Link Deco (older M3 model) mesh Wifi router with 2 extenders (1 on each floor).  It’s a dense area, but not like an apartment building.Other than running Ethernet throughout the house, what is my best course of action?  Am I stuck just hoping the wifi will work well today?  Are there tests

I shut off all Macs, iPads, Phone and iPods in my  house and yet I still have music playing.  I even shut off the router and music is still playing!  From where?

I opened my sonus interface and was greeted with a notification to upgrade.  So I am okay with that but cannot get past below screen:  Also “Help → About” shows all my speakers correctly but under “System” I’m missing ½ my speakers :-(  I was happy with this sound solution now not so much…..

I have a single Sonos One speaker and the app kept prompting me on my iPhone to update to Sonos s2. So I finally did, but the new app is a piece of garbage. It freezes up every time I use it. When I tried to delete it and re-download the Sonos s1 app, it keeps telling me device isn’t compatible and I need to “upgrade” to Sonos s2. How can it not be compatible when I was using it just fine until about an hour ago for the past few months? How do I get rid of Sonos s2 and go back to Sonos s1, which had NO issues at all. Thanks for any guidance on this. 

I use the Sonos One to listen through music through Spotify. When I use my computer to listen to Spotify, Discord shows what I'm playing, however when I use the One, it doesn't show what I'm playing. The same thing happens with Last.fm where when I use the One it doesn't scrobble but when I use my computer it does. My friends even say that when I’m listening on the Sonos One, my status doesn’t even show up on Spotify. Does anyone know what the problem is?