Controllers and Music services

I really enjoy  Concert Hall. But could we be given more information about the piece please, the Composer, Piece Name, Movement  and Artist would be nice. Thanks

My app states that the date and time is not set. I have been to settings and turned on set time from internet but it turns off again. I am unable to access alarms as it states date and time not set.  This problem seems to have resolved itself. It would appear that we had a power cut which might have caused the issue. 

Hello - I own a Sonos Play:1 (bought June 2019( and a Sonos ONE (Gen2) (new) and a LG HDTV - one of the inputs on the TV is DLNA and both Sonos speakers show up; however, I cannot establish a connection or interaction - are these speakers compatible w/ DLNA? Thanks. Dave

I have 3 x CR100 controllers. I note they are no longer supported by Sonos. What do I do with them? Will Sonos take them back to recycle them?

My primarily way to play music on my Sonos system & speakers is using airplay.  I have 9 different rooms setup..  is there a way to play all or create a button to play all rooms with out having to select each room individually. 

Hello,I’m not clear on the correct answer to this - I’ve searched the forum quite a bit.I am not ready to buy a NAS just yet.  Can I use a “dumb hard drive” that connects via ethernet cable to my wireless router, and will my Sonos ecosystem see that as my music library?  Any downsides?  If this does work, then what are the advantages of a NAS that I’d be missing out on?  Thanks in advance -

Hi all,From my quick search this question hasn’t been answered in over a year - apologies if I’ve missed the most recent discussion.Has Sonos adapted itself to be a airplay 2 sender yet?Cheers in advance

I bought into Sonos because it provided hassle free music throughout my house.  Over the years the term, "hassle free" has gotten less and less accurate due to the app "upgrades".  Today I attempted to address my issues with the app and found the support address listed on the Google play app page is no longer functional.  So I waited until 10am when I could use chat (who provides only 1 way to contact them and have it not be 24/7?) Where I got a very unhelpful associate.  He was probably good at trouble shooting system issues but that wasn't what I was looking for, it was just the only way I find to contact Sonos. And to cap it all off, the chat app stopped working after just a few minutes of chatting.

Having previously updated to the new Sonos app. - all devices were fine but now new iPhone update means the system is only now recognising the Beam and not the Play 3 and 1s

Will the SYMFONISK remote work with the Arc speaker?

Hi,TLDR; FR: double click group speaker volume to equalize the volumes of all speakers in current group.Super simple feature, after clicking on the volume of my group, it shows the volume bars of all speakers in that group.I often find myself trying to equalize the volume of the separate speakers by hand.When it it showing all volumes of speakers in that group, I would like to be able to double click the volume of the speaker group to automatically equalize the volumes of all speakers in the group to an average (OR the lowest volume of any of the grouped speakers).Thanks in advance for your consideration. 

The UI only displays the track title when viewing an album.For a various artist album the App does not show the artist in the track listing of an album.Can Sonos App display the artist per track ?

I am still trying to find a remedy for the lost ability to have Sonos read off iTunes/Apple Music on my iPad.  I have songs and playlists on iTunes/Apple Music that I can no longer play on Sonos because (a) Sonos reads only off of Music files on my computer (a MacBook Pro) and (b) Apple tells me I cannot sync iTunes/Apple Music to the Music files on my computer.  Has anyone figured out how to solve thsi problem?

I’m new to the Sonos world.  I have many ”lossless”  FLAC files(from CDs) on an external USB hard drive.  Is there a way for me to connect this directly with the Port to play these music files?  I don’t have an NAS, and would like to avoid using a computer in this chain if at all possible.  Right now, I plug this USB drive into the Blu Ray player and access the drive through the Blu-Ray menu.  

I have recently been unable to add/play an artist's top tracks list.  I have always been able to play or shuffle play the top tracks just like an album.  What happened?  Was this an intentional change in a recent update? Thanks!

I have read all the posts on having to shut off the bluetooth capability on the Sony side for the remote.  Yes, it gets my x900h remote to control the Playbar, but shuts off my ability to control my Spectrum cable box.   Advice welcome.  Not sure why that happens as the Spectrum box is a IR device as well.   Help :-)

Hi, I’d like to stream my songs directly from the Amazon Music app (the Android one) instead of from the Sonos app without losing the lossless capability that the Sonos and Amazon Music HD integration has on the Sonos app. According to this web page (https://support.sonos.com/s/article/3549?utm_source=owners_newairplay2_128803615&utm_medium=email&utm_content=cta-t2-learnhow_FR&utm_campaign=engagement_control2_178622_1623952&language=fr&et_rid=486898252) it’s written (in French) that we should be able to select our Sonos device from the Amazon Music app but I can’t see it on my Android phone (OnePlus 5T). Thanks,Alexandre

After the fibre was installed I fought with the bunch of Symfonisks to get them working again and I’m mega reluctant to jeopardize that by fiddling around with it AT ALL. So. Has the situation changed and now these babies will work with S2, or no?

So the scenario is I’m airplaying an album from my Mac to my Sonos Amp. This shows up on my iPhone’s control centre but I cannot control the playback from my iPhone, it’s won’t connect when I click on it in the screenshot. Shouldn’t I be able to control the playback from my phone otherwise why does the Sonos Amp (Jamie’s Hi-Fi) even show up on my phone? 

Today our S1 apps (Android) told us that upgrade to S2 was compulsory as the S1 controller was no longer compatible with our system. Nothing has changed since it worked fine yesterday.Is anybody else being forced to change? Given negativity I see on S2 stability I am reluctant to upgrade if I don’t have to.All my devices are S2 compatible BTW

Does anyone know what factors affect the response speed of a controller? Using the android app, I have a OnePlus 6 that is faster at browsing Spotify and loading artwork from a NAS than a Samsung S8, and that in turn is faster than an old Samsung Tab A, from 2016. Is this a processor issue? Or RAM? Or something else? In some cases, the difference at loading a tracklist or cover can be quite a while.Thanks in advance.

Couple months back realised I’d lost the ability to choose ‘play now’ or ‘play next’ or ‘add to end of queue’ when browsing my music. Only options now are ‘add to my sonos’, ‘add to sonos playlist’ or ‘play in another room’. Is that a result of the S2 controller, or my new Move, or something else? Is it curable?

The Sonos app will not start in Windows 10 version 2004. The banner appears and the Sonos.exe process is listed in TaskManager. I’m not sure but I don’t think it worked since installing Windows 2004. I uninstalled the app and then installed the new S1 Sonos app but it does the same thing. Other Windows 10 version 2004 computers are able to run the app. 

Pandora decided to stop working today. It finally said it needed to be “reauthorized”. I hit the button and brought me to a page that asks for an activation code. But I don’t have an activation code… when I hit “forgot code” or “where to find code”, I get this...    I forgot my code If you have forgotten your code, you can retrieve it from the product you are trying to set up. Simply select the Pandora option on your product, and it will give you a code to use on this page.   But no matter where I look on the Sonos app, I don’t see an activation code.  When I hit the authorize button it pulls me through a screen or two within the app but no code found there.     I also tried to remove the service and re add. And have the same issue… I know this was much easier when I did it forever ago...

Sonos1 app will only find bridge. Unable to find rooms