Speakers

This topic is older and might not have the most up to date information. Please click here to see a list of more topics around the same subject. HiI was wondering if anyone knew what issue I was having with my Sonos system. I’ll try and explain it in the best way I can.My Sonos system consists if one Sonos Arc, two Sonos One speakers, both a left and right for surround sound and a Sonos Sub. I have the Sonos Arc connected to a Sony Bravia TV OLED using the Arc port and also connected with my Dell PC through Airplay as it is not connected through a cable.The issue I’m having is related to iTunes, which I use to listen to all my music. It starts fine with no issues but say after 15 minutes or so the sound coming from the speakers begins to cut out intermittently and sometimes the sound coming from the Sonos One speakers cuts out completely leaving only sound emitting from the Sonos Arc. It only cuts out for say a second but happens more frequently the longer you listen to music.I only hav

Can't select room with speaker 

https://support.sonos.com/en-ca/article/set-up-your-symfonisk-speaker references a “power passthrough cable” but doesn’t provide any details. I don’t think it was included in box. Where would I get one and what would I ask?I wanted to use it to power one Symfonisk speaker from the other.

Sonos beam 1st gen suddenly stopped working wirelessly. Can’t locate on Sonos app and can’t discover on Spotify app thru AirPlay. I also noticed the light by microphone button doesn’t light on when pressed. Not sure if it’s related….I tried factory reset on beam and uninstall / clean install Sonos app on my iphone. Only way the damn thing works if it’s wired to router thru ethernet cable which is not feasible in the location i want to utilize. Haven’t changed any passwords etc. Please help! Thank you 

Hallo,I'm using the Era 300 via Bluetooth with my MacBook Pro. When I open a website that contains a video, even on Amazon where a product has a video showing how it works, the music that is playing in Background stops for 2 seconds.  

Config

Do I need more than one speaker in a room for the best sound experience?

I’m using an android phone connected line in on my Era 100 and the volume is very low. I have it set to 10 (max) on the line in settings, which is only slightly better than the lowest settings. I’ve tried different cables between the Sonos line in adapter and the highly rated USB C-to-3.5mm DAC adapter plugged into my phone with the same results. The volume at 100 sounds like 20 over wifi. Any help would be most appreciated.

Hello All Good People I have been planning to purcase two pair of speakers in near future,and one of the two pairs would most likely be the Sonos Five’s.If i buy these….what brand stands are you prefere to use. I belive there is Flexson,Mountson and Sanus by brand…and yes we are in Europe if somebody was wondering.And the Five’s will be in white colour.

I cannot get the speakers to play with the sound bar while watching tvafter moving to another state

I have been running a Project turntable to a Sonos Play 5 via line in successfully for several years now. I recently picked up a second hand Denon DN-C615 CD Player. I have tried connecting via Analogue Out (Red and White) into the Sonos 5 via line in. It plays and has volume fine, but the sound is very twangy (sorry no other way I can think to describe it)Wondering if I need an Amp or some other sort of intermediary?Any assistance greatly appreciated. 

I’ve been a long time customer and really love my Sonos system that I have added to over time. However, in recent weeks we’ve been encountering a number of different issues including:Different speakers randomly not showing up in the app (this is not consistent to specific speakers) Sound randomly cutting out of individual speakers while music is playing (also not consistent to specific speakers) Volume randomly changing on individual speakers while music is playing (note that the volume in the app is not changing but the volume of the actual sound coming out of speakers) Sound from the TV routed via optical cable to Playbar cuts in and out (note this is not an issue with the content/streaming since no issues when using the TV’s built-in speaker for the sound) Search within the app takes an excessively long time and does not consistently return results for connected services  Skipping tracks in the app does not work consistently (will sometimes hang for a bit before skipping, will somet

HI,I am looking to move or transfer a set of Ones to another location where they can be accessed by multiple people via Bluetooth or even if they have to download the Sonos app, and/or add it to their on system as a separate location if that’s possible.  Obviously looking for the easiest way.  What I am doing is taking the Ones to my martial arts studio in hoping to have multiple use them.  I’m not concerned if any services are carried over.  Is it easier to transfer the speakers to a new account and have people logged into that account via the app? I’ve seen numerous responses but, it still leaves me at a loss.  This is the breakdown of what I am trying to accomplish.*Setup a new or separate  system at the studio.*Have the ability for  multiple people use it via Bluetooth or app. Thanks in advance,Mark

I have a SONOS system consisting of 4 Play:1 devices and a SONOS Boost device. These have all been working fine until I went from the typical WI-FI system on my modem, to a mesh system. I finally got the Play:1’s to work, but for some unknown reason, the boost will not connect. I have tried numerous times. After each attempt, It would say “Your mobile device couldn’t connect to your Boost. Make sure the Boost is connected to power”. I don’t know why it has to be so difficult! Everything is says to do is already being done!I have tried so much, that I don’t even think this Boost is necessary anymore. I thought I needed it to boost the wifi signal to each device, but not sure anymore

my gen 2 play 5, linked to my gen 1 playbar, have recently been having syncronisation/delay issues and it’s more scary than ever when listening to Radiohead 😁 Seriously, why is this happening and how can i get them back in sync?

My Sonos system, which has worked seamlessly for years, suddenly won't connect to my WiFi. Before going through the setup for each of the 6 speakers, I'm checking if there's a current Sonos issue or if there's something I might be missing. I've already tried the basic WiFi network resetting steps. Appreciate any suggestions. Thank you.

I have 14 products in my Sonos System. i recently changed my broadband provider and this has played havoc with the system. I want to run th system off the S1 controlllerduecto having a ConnectAmp that is incompatible with the S2 controller. I had to downdrade 4 products which was donecsuccessfully with the help from support. However I have 5 products that show a spanner symbol with dot and “not registered”. When I try to register them with “link to my account” all shoe a set up error and suggest checking the internet connection. which is fine. Can anyone help me fix this?

I have a pair of Sonos Play 1 speakers as part of my larger system.  Both speakers are working fine, and I’ve set the “Status Light” setting on the app to off.  One speaker’s light is off and the other is flashing.  Why is it flashing and how do I correct this?  It flashes whether I’m playing music thru it or not. Oh, and it’s a white light. Thanks.​

Sonos Play:5 (Gen 1 ) stopping randomly for 5-10 sec when playing Spotify but works fine with Tidal. I have done everything Sonos support suggested. Sonos support said that it is a internal memory problem (to small memory for high-res streams). But Spotify is far from high-res and Tidal works fine. 

Not sure what's the deal here. I have dolby Atmos for home theater enabled. If I select any other settings, no issue.

recently i was listening to my S2 speakers.  Sometimes i use the voice feature to raise or lower volume.  Well, today i tried to increase volume, all of a sudden the speakers were wide open.  i immediately unplugged unit... could i have damaged my speaker??  it still sounds good, wondering it i could have damaged speaker

Hey, during a Sonos S2 app upgrade, the Dolby Atmos logo is lost in the app with previously spatial audio songs on Apple Music, even Sonos Spatial Audio list misses it. It worked beautifully earlier. Is it broken or is the logo just omitted in the app?

Diagnostics number 163658452is there any update yet on the progress of a fix for Era100 connecting to Sony BT turntable but no sound? I’m hoping there is good news very soon or my pair of Era100 will have to go & be replaced with another brand of speakers.

Feature Request:  I am a huge Sonos fan - with multiple rooms, Stereo Era 300, Stereo Era 100, Stereo 5’s, and an arc 5.1 home theater and even a Sonos connect to drive my hot tub system.  I would very, very much like to add a second sub to my stereo 5 setup (yes, it's a lot of base), but the room and music are asking for more.  I am contemplating leaving Sonos speakers and using a Sonos Amp and non-Sonos speakers and subs to do it, but I would prefer just to add a second SUB.  It's just software and an extension of what you can do on the home theater please enable this.Thank you for considering it - if someone knows a way to do this I would value that as well.  -jamieA separate note is very interesting how the Era 300 pair and the 5’ pair sound so different in different rooms.  The Era 300 pair do not work well in a bedroom with a lot of soft fabric and surfaces.  The 5’s sound amazing in that room.  The Era 300 pair sounds magnificent in the kitchen with hard surfaces, whereas the 5’

Hi, have been using Sonos for 10+ years now… have a couple of devices and my Play:5 (or S5) has an update available but wont do it with error code 30 - have reset it, connected it to cable and all that stuff, it just wont update.That is a stupid thing to begin with, but WHY ON EARTH cant I use it anymore? It worked JUST FINE until your damn apps found some update for it.Is there any way to ignore/skip that update? How hard can it be to keep the device usable? Its so annoying that a software issue blocks perfectly good hardware from being used. And it not really a bug but seems to be more a stupid design decision.Kind regards from sunny Norway,Thomas