Answered

HiI had a sonos arc installed with my samsung PN50B850 I have PCM stereo soundHow to get 5.1 soundI still love my TV but my sound is horribleThank you very much for your knowledge

When I am using my Sonos Roam with WiFi/S2 app there is no problems turning up the volume. But when I switch to Bluetooth mode, I can not play loud music. When I allow the volume to 100% in the app, and turn the volume up on my phone, the music isn't loud at all. The max volume on WiFi, and the max volume on bluetooth should be the same loudness....I hope.???Can anyone help? 

I have connected a new Roam to my system. I her no sound from it whatsoever. There is connection because I can use the roam to pause and play. I have also tried to connect with bluetooth instead, but it was still silent. Anyone with any ideas? 

I'm new to Sonos speakers. I purchased an Era 100 and plugged my turntable into it through the Line In. Works great, sounds great. The problem I have is, if I play Apple Music on the speaker, and want to switch back to the turn table, it doesn't automatically switch like I'd like it to. Is there a way to make it automatically switch back to Line In? The "Autoplay" settings don't seem to do it if it has last been playing Apple Music. Or is there a "Hey Sonos" or "Alexa" voice command to make it switch? The only way I have found is through the app. thanks!

Having upgraded my Vigin media router to get 1GB my Sonos one speakers won’t reconnect to the Wi-Fi. I have. Followed usual guidance but no joy. Is this something to do with 2.4 vs bandwidth? Hoping there’s  a simple solution as fair to say I’m not very technical! Any help much appreciated.

So lots of articles about new application but not available yet?so when will it be? 😊

How to listen YouTube’s music from smartphone Android on my Sonos Arc?  Thank you very much.

I cannot conect my Sonos Era 100 with my google home. They writed: not supported in czech republic.Can help me?

The surround sound setup instructions with Arc and Amp (to utilize my existing passive speakers for rear and sub channels)  say that when the surround feature is activated for Amp, the Sub output in the Amp is deactivated. So I can’t utilize my existing non-Sonos sub in a surround setup? If the sub output would work for a music only Amp setup I don’t understand why it would be disabled for a surround setup. Am I missing something? This is a pre-purchase question so i don’t have hands on experience with AMP and ARC yet. Thanks,

My roam is connected to the wireless charger but shows no signs of life.

I have connected my SONOS Playbar to my iMac via the former’s optical connection. I bluetooth (and have the option of hardwiring) the iMac output sound to a receiver that converts it into a digital optical signal that then inputs into the Playbar. I have the SONOS App both on my iPhone and my Desktop. The Playbar is configured and set up on both platforms. When selected to ‘TV’ the iMac sound output works on my Playbar, however after a while the SONOS App defaults to ‘Music’ and prevents the iMac sound output reaching the Playbar. Why does this happen and how can I stop it?

Is it possible to downgrade from an Arc to ex Beam in Sonos upgrade program?

Does Sonos provide warranty in India for products which are sold in the Indian market ? Also does Sonos provide services which are out of warranty in India ? 

Hi, I have a family room which has a seating area around the TV with a Beam 2. Across the room a few metres I have a pair of Era 100’s. One Era is in the kitchen area and the other is in the dining area. Can I use the 3 speakers as 3 zones so split the Era 100’s into 2 zones and run them as mono? Therefore the kids could watch TV quietly using the Beam then I could listen to radio in the kitchen and have the dining room Era off. Then at a party turn on all 3 to have the party mode or use the Era as rears for the Beam when a film is on?. Is this possible? Thanks Sam

can a play3 and a roam be used at the same time

I have been trying to connect an old Sonos Connect that was previously connected to my account but has been unplugged for a year. When resetting it and trying to add it into my current setup which is 6 other Sonos Connects and 2 Connect Amps. It prompts me to sign into an account to complete setup. I sign in using the same email and password that the other ones are on all on the same network ssid. But it seems to have created a partition some how. On my phone S1 sonos app i only see the newly added Connect. but on my computer s1 controller I see the other 8 in their correct groups and no sign of the newly added one. Its like it didnt add it to my account or something. I have probably spent around 6-7 hour troubleshooting and finding every forum and video possible and this is the farthest i have made it trying to connect it to my current system. I have performed many resets and re pairings.

Just asking about using the eq. I surely hope the eq is more than just two lines ( bass and treble ) using slider to adjust. The reviews I read were really topping up EQ. They made it sound like you had infinite ways to adjust. Hope I’m wrong cause it may go back

Dears, I noticed severe quality degradation since system was updated to 16.1.1. Sound is breaking every 30-60 sec. Any solution here? My set: Beam 2 + MiniSub+ 2xOne

Hi all, So I have 2 front and 2 rear in wall architectural rectangular speakers and 4 in wall architectural ceiling speakers. This is for a TV setup. Originally I wanted a 5.1.4 setup but wanted to stay with Sonos for ease.I know I can set up the front and rears with 2 Amps and surround, making a phantom center. Is there any solution to add in the ceilings with another amp or two into this setup? Do I need to just get a receiver, and if I do will the phantom center be less effective? I'd prefer not to add an Arc because of the crowded look between the TV and mantle… but would consider it if it was the only solution.

Hey all, I recently changed to sky broadband from BT and since changing I cannot get my speakers to connect to the new network.I have separated the 2.4 & 5ghz channels and also turned off the sync and still nothing it's done my head in so much. Anybody know what settings are required to get them working?. I'm trying to setup up a play 1 & 3 and also a beam. Many thanks for any advice in advance also. 

Bonjour la communauté, j’ai un système sonos s1 qui fonctionne bien et qui n’est pas compatible avec S2.j’ai acheté une Ray que j’ai branché sur ma TV avec un câble optique qui a fonctionné immédiatement.j’ai eu le malheur de vouloir la synchroniser avec le reste de mon système S1 ; je me suis rendu compte après coup que la ray n’était pas compatible ( uniquement S2)j’ai réinitialisé la ray en espérant tout effacer et la rebrancher sur ma TV et m’en servir que pour le son .depuis elle clignote en vert mais ne fonctionne plus ;pouvez vous m’aider SVP ?j’espère ne pas avoir tout planté    

I have 7 Sonos Move speakers, all in “play all together same source” mode and in trying save a playlist I get the message "Sonos doesn't have enough free space" when saving a queue as a playlist". There are no playlists in my Sonos Playlist area except for ones (named but blank) that have been named but not saved to as I try to figure this out.  The mp3 files all come from a hard drive that is connected to a router. I recently replaced the router, re-connected the Network Drive and all is seen by Sonos. My current attempt at a playlist has 8428 .mp3 files so not over a 10k limit etc.

This a question asking for suggestions: I oriiginally had the play 3 and 2 play 1s to play music in our dining room. A few years later, I invested in the Sonos Arc and am now using the 2 play 1s as rear speakers for our tv setup. So what’s the best use now for the play 3 - which is no longer involved with the Arc setup?

I have two questions: I recently purchased a samsung the frame tv and have a Sonos beam sound bar. The sound bar is connected to the One Connect box and produces volume, but there is no way to control the volume using the Samsung remote. Can I change this?   I have two Sonos One speakers that are connected to my living room. I tried adding the beam to the same Sonos group, but I get an error that my app is not the right one. I’ve uninstalled the Sonos 1 and Sonos 2 apps about twenty times, and I cannot get the app to recognize the sonos beam at all?

I am a long term customer of Sonos. Currently I own more than 20 devices. In my home theater I have an Arc, two 300's, and two Subs, one of them is a Gen 1 and the other Sub is Gen 3. My Gen 1 Sub shows as "Not connected", and for a couple of years now… I tried resetting many times, changing positions, etc. I don't know what else to do. Any recommendations?