Home theater

Setup: Older Sony TV w/o ARC, so I am using the HDMI-to-optical dongle provided in the beam package. To be clear: The TV speakers are “off” via its menu, so it is sending sound via an optical cable to the dongle provided in the Beam package. The sound is fine. Here’s the issue: the Directv controller remains paired with the TV. Although the volume doesn’t change on the tv (because the tv is sending it to the Beam) the TV still shows a volume bar (which is not correkated to the volume at all). The remote is sending IR signal to both the TV and the Beam. Question: can I unpair a Directv remote from the TV volume, so when I click Vol+/- the IR only is recognized by the Beam? I’d rather not see a volume bar on the TV (nothing in the menu to turn it off)

I'm trying to setup my Beam and two ones as surround sound. I've gone through most of the processes but every time I try to enable CEC I get a response on the app that it's not enabled. Sound is coming from the TV through all of the speakers. I have gone into the menu and turned on Audio Out and enabled Simplink. Not sure what to do next...

Controlling Sony tv with alexa

Hi all, I set up my beam earlier today and it generally works fine but does seem to have a recurring issue. It will often go silent then my TV displays "unmute" when the sound comes back on a few seconds later. It also then ungroups the other speakers in my system (I have unticked the option to ungroup when watching the TV) I have a Samsung TV and my beam is connected to a bridge grouped with a couple of play 1s in other rooms in my house. Until today, my system has been rock solid for at least the last 6 months. I've also have reserved ip addresses for them. Diagnostic is 774332081 if someone from Sonos could have a look? Cheers Jacob

I received my white Beam yesterday, but it came with a BLACK power cord. This is the 7th white Sonos product I've purchased, but it is the first and only one that came with a black power cord. Was I provided the wrong color cord, or are there no white power cords for the Beam? My beam is placed above a projector screen, and the power cable runs along a white wall, so I was really expecting it to be white. Thanks.

I have just setup the Sonos beam with my Samsung UE43KS7500 TV. Everything works brilliantly apart from the TV switching to my HDMI 3 (ARC) input after about 10-20 mins of watching TV. Is there any way to stop the TV from auto switch to the Beam input for viewing. Also, is there anyway to turn off the Alex Active white light which is distracting whilst watch TV in a darkened room? Many thanks for any help

I recently bought a new TV , an LG OLED55C7P, and a playbase with two rear play 1 speakers. Everything works great with the TV's onboard Netflix, Amazon, and also my Xbox one. The problem is with my cable. I have optimum. When the Dolby setting is enabled on the cable box the lip sync is all over the place. When I switch the box audio setting off to "other" it becomes stereo instead of surround but the lip sync is fixed. Any suggestions? Cable company says it's the sonos but the lip sync is still an issue with the TVs internal speakers... I have tried the audio settings on the tv but I can't delay it enough. Also I'm a sound designer so I understand frame rate and all that fun stuff.

Hi everyone, I currently have a Sonos Playbar, 2 x Play 3's as Surround and a Sub. The sound quality is amazing for both TV and music. However, I'm now thinking about replacing the Playbar with a Beam. I've read the Beam does not have the same quality as the Playbar, but would the additional Play 3's and Sub make up for any loss? Would there be any difference at all? Has anyone replaced the Playbar with the Beam when they already have Surrounds/Subs? What was your verdict? Thanks Richard

Has anyone had an issue using the internal apps on their LG OLED and the Beam? I find that although the Beam sees DD5.1 something is very wrong sometimes as the sound passed is so quiet on some channels it is impossible to hear without turning it up high and then the loud sounds are way, way too loud. It is like the mix is getting messed up by the TV. Initially I thought it was an issue for all content but subsequent testing using the same apps on Xbox One reveals the sound is significantly better in Dolby Digital via the Xbox than via the TV's internal apps. An example being Dunkirk the start of the film. The sound of the paper blowing in the air is missing using the Rakuten TV app on the TV. Unless you set to stereo. However use the app via the Xbox and you can hear the noise of the paper more clearly. It is a marked difference. I know there is a general DD5.1 voice/effects mixing issue that is inherent in general and that Sonos products n

I am curious if SONOS thought about how they expect the Playbar to be wall mounted with the wiring concealed. From the looks of it, and the optional wall bracket, they did not think to hard. :) Surely they are aware that if you wish to adhere to electrical codes, you cannot simply run the power cord through the wall. It needs to have an outlet behind the speaker. That is the main concern. And it applies to nearly all soundbars that are powered via high voltage. As a custom installer, I will find a way to do it. I have 2 ideas in mind and will post an update when I have figured it out. But manufacturers need to take some thought about how people are going to use their products and design them accordingly. Stay tuned for "how to mount your playbar, conceal the wiring, and keep it legal". 🙂

Just bought the new beam and not sure how and if we connect this to our existing 3 speakers, seem to have missed those instructions, Beam connected to TV and working fine, but no sound from the play 3s

We have set up the Beam and added a pair of Play 1s but now very little sound comes out of the Play 1s. They were very forceful before individually and as a pair but now as surround speakers they are feeble! Is that right?

Where are the settings on the Sonos App to lower bass at night and to increase vocals?

I bought a "sonos connect".I have connected the cable box to sonos connect using RCA. I could not make it work.

Had the same issue as lots of people trying to get Samsung to link to my new Beam with no luck. Read loads of solutions but finally unplugging everything from the TV except the aerial, switching off everything at the plug, plugged the Beam back into the HDMI Arc and switched the plugs back on. It had a think about it for a minute and then hey presto it worked, the sound suddenly came out the Beam. If in doubt, switch it all off and on again!

Hi all, after just mounting the playbar on the wall under the tv I noticed the sonos book that says "to preserve audio quality, ensure the connector panel faces away from the tv". Does this have to do with the sonos from part being either at the top or the bottom as long as the cords are leaving at the back of the playbar into the wall? Right now I have the cords coming out of the top (optical, ethernet etc) of the playbar which because it is under the tv would mean it is facing TOWARDS the tv (ie the silver part of the unit is at the top ). I did this because it looked better because you could see the cords more when they came from the bottom (AWAY) from the tv. Does this matter much or is it overstated? Don't see how it would make a difference even though it says it on the playbar booklet

Hello, first post so please go easy! I received my Beam on launch day and setup seemed to be a breeze. I managed to integrate it into my system (2 other Play 1s) and music plays (still plays) without issue. The issue seems to be with the connection to my LG TV. Initially this all worked, sound was good and Alexa turned it off/on and adjusted the volume. After a couple of hours use the Alexa control over the TV seemed to stop working but the TV sound was fine. Then the TV was turned off via the remote and since turning it back on the speaker does not output any TV sound - music/radio can still be played via the Sonos app. I’ve checked my settings and confirmed HDMI ARC is selected and CEC is on. I’ve tried powering down both the TV and the Beam and also repeatedly used the app to connect the speaker. When I try to test the Simplink connection I see a HMDI 2 (ARC) pop up on the screen but then the test fails - I’ve tried this re

My Beam recognized my TV immediately when the replacement cable was installed

I set up our new Beam, and while it is working fine, when we attempt to use the volume control on our Comcast remote, we see an obnoxious "Not Available" message on the TV every time we turn the volume up or down. Has anyone else experienced this? For what it's worth, I had to use the optical cable setup because our Samsung TV doesn't have an HDMI Arc connection.

I do not have HDMI ARC on my TV so I'm using the optical converter to get sound from the Beam. However, the sound keeps going in and out and I cannot get a good connection. I feel like the optical input is in all the way but whenever the cable is moved or bumped, I lose the sound. Any suggestions?

What sound will the Sonos Beam (only using this speaker in my TV set-up) output when using Sky Q? Am I right in understanding it will be Dolby Digital?

Sonos Beam, the smart, compact soundbar for your TV is now available. We've collected some of the best resources for Beam in the thread here so that it'll help you find the answers you might be looking for. You can also find good information about Sonos home theater on our Home Theater Megathread. Learn more about Beam on our announcement post here and on the shop at Sonos.com.

How do I switch back to TV input after listening to music. Currently I,m having to turn the TV off and back on to resume TV input.

I bought the new beam last month and took delivery yesterday. I have other sonos products and have set up many times. After setting up the beam I was so disappointed when the ARC HDMI did not stay connected and causes a constant switching between TV & external speaker. I spent about 2 hours on the phone with sonos support to no avail. Can anyone help?

Hey guys Just picked up at ATV 4K and I cannot figure out the settings for it to pass 5.1. I have it hooked up to a Samsung Q7F QLED tv. My Xbox one and PS4 are having no issues with 5.1. When I go into setting on the TV it will not let me select Dolby. I have tried different cables and inputs with no luck. I have Dolby 5.1 selected on ATVs audio output. Anyone have this problem or solutions?