Answered

Hello all, I have a Playbar on its way and have been reading up on here for a couple of days. I have a Samsung LED TV with optical out, Xbox One, Tivo (Virgin Media), Minix Neo U1 and Samsung Blu-ray. Eventually I'll have the Sub and maybe 2 Play 1's for rear surround but for now it's just the Playbar. What's the best signal for the Playbar only, does Dolby 5.1 make any difference over just stereo from the TV?. I don't mind taking the time to get 5.1 through the optical TV output if it makes a difference if it's worth the trouble.

Just got a Play:1, set it up successfully with my i Phone added another i Phone and i Pad. All working fine. Down loaded the Windows Controller. When I tried to connect to my existing system I get the message "No existing Sonos system could be found" Any help would be welcome.

With the latest sonos app causing the ability to control my sonos speakers from the lock screen now unreliable and missing, I'm searching for alternative ways to easily adjust the volume or pause/stop the sonos with a third party remote control.....either hand held or wall mounted. It is quite annoying to have to unlock my phone, open the app all just to adjust the volume or pause music. Who has used 3rd party remotes with success.....which ones did you use? FWIW, I am wanting this to control the older Sonos Play:1 speakers. I have 3 of them......all mounted high and out of reach.

Hi. my Sonos shows Family Room (+Sub), but no sound is coming from the Sub. I have been troubleshooting this for days. Forced Sonos speakers to be on the 2.4GHZ bandwidth by renaming a dual band router, made each speaker have its own DHCP reservation on my router, tried hardwiring an ethernet cable to the playbar. Under Advanced Settings / About My Sonos, It shows both Playbar and Sub, but it states "Warning: Your wireless network will not support the use of a Sub or surrounds with your Playbar". It worked perfectly for 2 weeks when all new, but have been having a lot of troubles getting it to all work smoothly again. The playbar kept losing its connection, but i think I got that sorted at least. Please help!!, as this is getting very frustrating for such an expensive sound system. Thanks,

Hello, I am considering replacing my old classic amplifier+CD+bluetoothReceiver with a Sonos Amp. Since it will be connected to my turntable, it shoul be great. However, apparently I won't be able to listen to my LPs using my headphones, am I right?

I have two Sonos Play1’s on the same network. The Sonos app sees both players as separate rooms, and currently, the app can play the Sonos in either room (as expected) What I would like to be able to do is to add an additional level of security so that anyone using the app to play music would have to add a password or something similar to play music in a specific room. The reason I need this functionality is because the two Sonos Play1’s I have, although they are connected to the same network, they are in different buildings. So with the current set up, someone in Building 1 (Room1) is also able to play the Sonos system in Building 2 (Room2), which is clearly a problem! If there is a solution to this problem, could you please advise.

I've been looking at speaker stands and wall mounts for my 5.1 Sonos system arriving tomorrow. I have Sonos One's as surrounds. My wife saw the Sonos Shelves and she become fond of them and would like to get them. My question is do you seen any disadvantage of using the Sonos Shelf instead of a typical wall mount for surrounds. I just want to be sure just in case we go this route. All the pictures I've seen seem to be of solo speakers not in a surround system. Thanks

Hi, I have a HiFi system consisting of an amp and 2 speakers. I would like to attached a Sonos Connect and link the amp output to the Sonos Connect input. I understand the Sonos Connect automatically detects input. My question is if this also automatically turns on any other Sonos speakers I have at home? I would like to achieve the following - when there is music playing on my amp, I would this to turn on all my Sonos speakers and start the music playback on all of them. Please note that I cannot do the other way around, which is linking Sonos Connect output to amp input, due to the nature of my set up. Thanks!

I was told to post this in the community. Who do i have to contact to talk about adding an option to add LINE-IN to the FAVORITES MENU Thanks, Sonos is awesome!

Can I connect my Project Debut Carbon Esprit SB directly to Sonos Play 5 (Gen 2) without the use of an amp?

Hey there; I have a house full of echos, dots and sonos speakers. In general, my Alexa Sonos skill is not working well. For example, I have two Play Ones paired in my kitchen as "Kitchen". When I say, "Alexa, play Billy Joel in the Kitchen" she says "Shuffling songs by Billy Joel on Kitchen" -- but no music plays in the Kitchen. She thinks she is streaming.... I have deleted all my smart devices, and reinstalled, etc. Not sure where to go from here. I was hoping you guys might have some troubleshooting suggestions. Thanks, Mark

Hi, I wonder if using 4 120W 8 ohm speakers in parallel in a Sonos AMP is safe? I know that each channel in the AMP is 125W and I'm afraid of damaging the speakers if I turn up the volume to high. Please anyone help me here? Thanks!

I have an Echo Show in the kitchen, Beam in the living room, and a Sonos One in my bedroom. If I stand 1ft from the Show and issue a command, the Show, Beam (15ft from the Show), and sometimes the One (25ft from the Show through a door) will perk up as they hear the wake word, but instead of the Show responding one of the Sonos devices will. Usually this is the Beam. Echo Spatial Perception SHOULD be able to tell I am closest to the Show and therefore expecting a response from the Show. Instead, if either of the Sonos devices hears the wake word they will respond although the command was not meant for them. I’ve tried factory resets, enable/disable the skill etc to no avail. Has this happened to anyone else?

my Sonos has some troubles lately. 3x Sonos 1 and 1 Sonos 5. Music takes some time to load, plays for 2-3 seconds and that waiting for about 5 seconds and then continues. WiFi in my network seems ok, 3 UniFi access points throught the house all wired to the router. What could be the problem? I sent in a diagnosis to Sonos: number 947289968 Anyone have suggestions?

Hello :) My Blu Ray is the Sony bdp-s3700 and TV is Sony kdl 32w705b. Will I be able to transcode DTS to Dolby Digital with any of these?

My Sonos Play 1 serial number 7828CAA9FD4C3 has been stolen from my premises last week. Is it possible to track it and block it? Many thanks in advance

Hi to all I'm looking for a sound bar to use in multiple videoconference rooms. Because Beam has several microphones integrated, is the the possibility to use in some way to listen and speak using software like Skype, Teams or Zoom? Thank you. Ciao ciao

I have a CD player on the line-in of a connect amp, grouped in Sonos app. I want to play CDs to my Play 5's and use Alexa as voice control. The Play 5's work great with Amazon Music as a source, but Alexa discovered the Connect Amp as a speaker, not a music source. Have not yet found the key to getting my CDs to play. At this point, im not even certain i have my amp confogured properly in the Sonos app, since it seems to want a music source identified, even though i want to use the line-in. Maybe i should just delete all and start over.

My playlists usually run to 100+ tracks. I have them in a random order. I'd like to ask why does the Sonos system repeat the same track three or four times even though the track is only added once? This happens even when the shuffle feature is used.

Loved the functionality of Alexa on my three Sonos One speakers when I bought them in September (voice control at last!!), though I did notice little glitches here and there. However, one by one, the speakers stopped responding to voice commands, and after procrastinating for awhile, finally went through the steps of re-setting everything. To be clear, I can control the Sonos speakers flawlessly through the Sonos app. The devices all show on the Alexa app. When I call Alexa, it either doesn't respond at all, or says it cannot understand me right now. Ran diagnostics on Sonos app: 1895040296 And yes, the mics are on (double white lights are showing on all speakers)

Dear Experts around the Word, please help me to understand how Sonos Boost works technically. I would nee this informaiton for my Network design. [b] CONTEXT:[/b] * Let's say there are 4 Sonos Connects on WIFI connected to a wireless router * The wireless router creates a WIFI e.g. SSID "homenetwork" with password "xyz123" * In this case, all the Sonos Connects are hooked on 2.4GHz on "homenetwork" as Sonos Connects does not operate on 5GHz but only on 2.4GHz * The wireless router provides IP addresses to all Sonos Connects * Any Sonos apps (on mobile phone) can control the Sonos Connect units as long as the mobile phone is on the "homenetwork" [b]QUESTIONS[/b] 1) Are my assumpitons above correct? [b]NOW WHEN ADDING A SONOS BOOST[/b] * If I add Sonos Boost (with help of the mobile app "Add Boost or Bridge" in the settings menu) * Connect the Sonos Boost with Ethernet cable to my wireless router (that provides the "homenetwork" on the air) [b]QUESTIONS ADTER ADDING SO

My SonosOne microphone only works once each time I turn it on. I have reset a couple of times, including deregistering every device in the house from Alexa and Sonos and starting again. Same problem continues. Please help.

I have had a Sonos One for over half a year, Alexa voice service used to work on it like a charm until I upgraded my old router to Orbi. Ever since Alexa fails with the message:" Sorry I have trouble understanding right now please try a little later", I have tried many different fixes but its only a matter of minutes to hours (depending on the fix) for Alexa to fall back into the same error: - Replug the Sonos One results in Alexa working for 10-15 minutes before the error - Re-registering Sonos results in Alexa working for 3-4 hours before the error - I have tried many more: Resetting my modem/Orbi/Sonons, Setting up Orbi's Satellite after I setup Sonons, changing the 2.4Hz channel of Orbi to 6 instead of the auto(3). I have sent my diagnostics to Sonos and they found that my Sonos speakers are not communicating with Amazon. Does anyone have a similar problem? Can you think of something else I can do? My system: - Pace 5268AC FXN (AT&T Uverse modem in bridge mode) - Orb

Does Sonos is planning an update for Android users to be able to listen video streaming services through Sonos speakers. Reference: I just bought 3 Sonos One speakers.

kiss is my goal but per the usual app gyrations, Sonos app is anything but simple, for me. As the Dao talks about, everyone else is sharp, I alone am dull and have no end of confusion using this system. How do I find my likes across several devices that I use to control my play1 and 5? I’m talking real basic here as playlists and likes are scatter across 3 iOS, 1 Android, and one iMac.