Home theater

I have an  Sonos Arc connected to a Samsung TU8000 television via EARC. I am unable to watch DTS encoded blu rays because my TV won't pass through LPCM, but rather only passes through stereo PCM. What is my least expensive workaround for this issue? I don't understand why it was a benefit for Sonos to issue a firmware update to support LPCM when according to rtings.com no television can pass-through multi channel LPCM. Thanks for any help.

I am planning to set up Sonos Sub + Sonos Amp + HiFi bookshelves. Is there a possibility of purchasing a Graphic Equalizer and via Amp EQing the system's sound? Most importantly frequency range of 1k-9k, mainly treble. If I can EQ the Sub that's great but my main goal is EQing the speakers. Thanks. 

I currently have a projector with an Amazon Firestick and a BluRay player plugged into its two hdmi inputs. Stereo audio out from the projector goes to a stereo Bluetooth speaker (JBL Extreme) via a cable.I've just moved house and now have a dedicated cinema room. I want to use a Sonos Arc to give me a Dolby Atmos capability but need to be able to stream videos (from a 4K Amazon Firestick), play BluRay videos and also play Xbox games. The Arc only has a single HDMI input so what's the solution? 

I’m looking for advice on which Sonos product I could use with ViewSonic X10-4K - a wireless connection doesn’t seem to work, so I believe I’d rely on cable connection? I’d appreciate any help, thank you.

Hi my Sono’s one’s keep disconnecting.My Beam is fine but no sound from the one’s.The App just says no system found and I cant access anything on the app.I don’t understand the technical stuff and don’t know what to do :(

Does anyone have a way to measure or test the bass output on the Arch or can explain why there is so much difference in the bass of the Play:5 vs Arc? I bought the Arc SL last week and trying to see if it’s defective or not, i.e. a feature vs a bug!Much appreciated!

I would like to know how to display volume indicators on the TV when using my Sonos Arc and the HDMI (ARC) connection. I have it connected via HDMI ARC and can confirm that the volume controls work fine, but there is no volume bar indicator so it is impossible to tell how quiet/loud the system is without something playing. All the research I have done that have this problem is when the TV is connected with Optical, but I am using HDMI ARC into the HDMI (ARC) port on my Samsung UA55MU6103; there is no optical cable connected.  Additionally, I can confirm that the TV is only using the Sonos Arc to output music, and when I change volume, it displays on the TV as controlling a “receiver” but it only indicates “up” or “down”.  Thanks for your thoughts, look forward to hearing from you.

Hi, I’m an electrician wiring in a Sonos setup for a customer.We did a kitchen remodel with 2 sets of in ceiling Sonos speakers tied to a Sonos amp with speaker wire. One set are in the kitchen and another in the living room between the kitchen and the TV. The kitchen and living room are in an open room setup with no walls in between. And both sets of speakers are visible from the TV. This was laid out by the owner and is primarily for listening to music.I believe that he has another older style Sonos amp and speakers that he will pull out and add at some point.Now he has set up a Sonos soundbar and sub-woofer at the TV and I want to tie in the ceiling speakers as rear speakers in a surround setup for him.The TV will be the source for sound on this system. I have not seen it but have been told it (the TV) has quit a few HDMI ports. I will see it tomorrow but right now I don’t know if it has fiber or other digital output options.From what I have been lead to believe is we have to tie th

I’ve recently both two One sls and used them for a week. I was really happy with the sound and decided to add an Arc (not knowing that there were bass issues). After installing is was disappointed with the sound especially  in comparison with the two One sls.  After fiddling around with true play (4x) the highs and mids sound fine. The bass however remains bad. Muddy/ clipping or something even at low volume. As I am a techno/ deephouse listener I expected deep bass. I was quite impressed with the bass the two small ones already displayed and expected more of the arc. TV/movies bass sounds better.It seems that there was already a software update (which I’ve done) but I can’t hear any improvement on heavy bass tracks. Does anyone still experience the same issue?( I am new to this forum so maybe already covered on another thread) If not, I am returning the Arc to the store. 

Hi,I have a Sonos Beam and (independently) two Sonos Ones set-up as a stereo pair. All speakers are in my lounge and both use the S2 app on my iPhone.The Sonos Ones play fine and the Beam plays content from my TV with no problem.I wanted to use the Sonos Ones as surround speakers for the Beam, but when I try to do this in the S2 app (using the app’s set-up Wizard) I get the following error message,“Two compatible Sonos speakers are required to add surrounds. Make sure your products are powered on and connected to wifi.”All my speakers are on and working fine (independently) on the same wi-fi network. One of my Sonos Ones is in fact directly connected to the router by an ethernet cable (I get this error message whether this ethernet cable is connected or not - I’ve tried both ways).I’ve tried re-booting the Sonos Ones, and this hasn’t fixed anything. The only thing I haven’t tried yet is turning the Beam on and off.Any help/ideas are much appreciated.Many thanks,Stu

One thing that i do not get is. With the amp you can use exciting speakers to make a 4.1 setup. But even just with the general setup of aps. I do not get why they have not implemented the ability to add a physical center channel  either via a new amp which has a dedicated center channel or as par of the app just like you add a sorround you should be able to add a center which could be something like (Play:3, sonos beam, play 5 and more i am sure)  

Hi! Recently bought a TCL ep685 and have connected my Beam to it. Audio is good, but have some sync issues here and there. If I turn the TV on/off it’s usually back to normal. Seems like if I set the “Digital Audio Out” to PCM instead of auto, the sync issue is gone, but audio is way worse. With auto it’s a lot better. Also it says DD 5.1 in the app with auto.Does anyone have experience with this or any solutions that doesn’t result in worse audio?Thanks

My mother in law is having a mirror TV fitted and needs external speakers but doesn’t want to see a soundbar underneath the TV or have speaker cables routed around her room.She is more concerned about how it looks rather than how it sounds and isn't after surround sound.What is the best way to use a L & R speaker connected to the TV without a soundbar?I guess I could use the ARC connection from the TV connected to a Connect Amp and send that to the 2 speakers but it seems like expensive overkill to use the amp for that. I’ve considered buying a beam to control the L & R speakers and hiding/muting it but am not sure how it would sound.  I’ve been looking at other setups Like the Audio Pro bookshelf speakers but they need to be connected with a wire.Any suggestions would be greatly appreciated. 

My TV is LG oled65cx (2020), I'm connecting to the Sonos arc using the cable that came with the soundbar. I've checked all the boxes: eARC turned on etc, and Netflix shows Atmos for the show, but when I start it flashes "Dolby vision" and the Sonos app says "Dolby digital Plus 5.1. What can I possibly be doing wrong? I have unplugged the hdmi and power chords on both devices while switching to internal speakers in different orders but to no avail. Help? 

I have bought the Sonos amp and hooked it up to totem signature one speakers and Sonos sub. Is the amp powerful enough to run these speakers?  Totem Audio didn’t think the amp was.  Suggested I contact Sonos.  I couldn’t find anything on the internet to suggest the amp was.   Critiques talk about budget speakers not higher end products.  Appreciate your input.  

Hi all,I’m new to Sonos and have recently bought the surround package with the Arc, One SLs and Sub v3. I’m enjoying it however becoming frustrated as the entire system disconnects on a weekly basis. Following the usual switch it all off, leave it for a bit and switch it back on does work,  it a week later, it’s disconnected again.  I don’t have issues with any other of my contraptions disconnecting from the WiFi, only the Sonos kit.  Any help is appreciated.  

5.1 Playbar Sub 2xPlay3 S2 Nvidia Shield 2019When watching Stereo PCM via Nvidia Shield (IPTV, Tidal, Netflix etc) I get Stereo Upmix on my surround speakers (Play3s), but when watching SOME STREAMS on Twitch (also stereo PCM via Shield) I don't get no Sound on my Play3s. Some other Twitch Streams (also Stereo PCM) play the sound as expected on the Play3s. What is Twitch doing different about Stereo? Thanks! 

Hi guys. I have a Sonos Beam and I'm planning to purchase either the Sony XH90 (X900H in USA) 75'' or a LG CX 65''.My worry is that the Sonos Beam used to give me sound lag with my PS4 and my old Panasonic Viera, which I solved with a switch that allowed me to connect the PS4 via optical and the TV via HDMI. However, this won't be a solution anymore, as I sold my PS4 and I'm hoping to receive my PS5 this week, which does not have an optical out.I think I've read somewhere that with the LG CX this is not a problem as there's some "passthrough" option which solves this issue. Does anyone have a PS4/5, the Beam and the Sony TV who can comment of any sound lags issues and solutions?Thanks a lot.

Hi,I am new to Sonos, but looking to incorporate a number of Sonos products in my home as I complete a renovation.  I am working with an AV installer, but I have a couple questions, which I cannot find clear answers for and so I’m looking for some help.In the living room, I will be using a Sonos Arc + Sonos Sub + Sonos Amp/in-ceiling speakers for the rear surrounds. My installer is recommending that I use Monitor Audio C265 speakers as the in-ceiling speakers instead of the Sonos in-ceiling speakers, as he feels that they are a better speaker for the price point.  Here are my quesitons:If I use non-Sonos in-ceiling speakers (connected to Sonos Amp) for my rear channel in the 5.1 setup, obviously I will lose truplay calibration for the in-ceiling speakers.  However, will I also lose the ability to trueplay tune the Arc + Sub (since the non-Sonos in-ceiling speakers would be connected to that particular set up)?  What does the trueplay calibration do that I cannot do by manually adjustin

I’m swapping out my full-sized, wired 7.1 Klipsch to Denon AVR system, looking to know how upscale a Sonos system I can build as wirelessly as possible, eliminating the receiver and using an HDMI Arc or HDMI eArc connection from the TV. The only other connections to the system would be a Blu-Ray player (ideally routed through the TV via HDMI) and my phone (via the Sonos app).I'm guessing an Arc, 2 Subs, and 2 Play 5's for the rear channel would be the ultimate system achievable under currently available Sonos products? Or can Sonos do a 5.2.2 without an Arc or other soundbar? Or are there other Sonos soundbars that would be an improvement to the Arc if another pair of speakers were used for the upfiring Atmos channels?Can you use other, better Sonos speakers as the upfiring/height and FL/FC/FR channels? Or is that too many separate devices to work within the Sonos ecosystem? What’s your in-the-realm-of-reality dream Sonos system for an Atmos home theater set up using existing Sonos har

Swapping out my full sized Klipsch 7.1 + Denon AVR and wondering if it is possible to create a 6.2 4 Atmos system with one wired Arc connection to an Atmos-capable TV, 2 wireless Sonos subs and a 2nd Arc wireless connected to the rear for a 6.2.4 Atmos setup.Is this viable? Has anyone done it? Specifically, can 2 Arcs be connected to the same Atmos setup if only the one is wired?

Hi all,I have a Play:5 and I was thinking of getting a portable projector with screen mirroring capabilities (e.g. https://www.viewsonic.com/us/m1-1.html). My question is can the projector mirror the video on my iPhone (for the viewsonic at least it is a wireless network connection) and be able to play the audio through my Play:5 (using AirPlay)? If so, would there be an audio delay?Hope I am not duplicating any questions. This was the closest one I could find but it has been closed: Thanks in advance.

Hello all, I’ve been looking through many different threads and trying to compile information, could someone please reply if this is correct, as I suspect at least some of this is not accurate.  Note this assumes a TV equipped with eARC or something approximating (e.g. HDFury Arcana):Audio Input Xbox Setting Sonos output Locals source/Blu-ray w/Dolby Atmos TrueHD Streaming source w/Dolby Atmos (Netflix) Game w/Dolby Atmos Bitstream → Dolby Atmos Dolby Atmos (lossless for local sources) Local source/Blu-ray/game with DTS-HD Bistream → Dolby Digital Plus Multichannel 5.1 (lossy due to format conversion) Local source/Blu-ray/game with DTS Bistream → Dolby Digital Plus Multichannel 5.1 Local source with DD+/DD 5.1 Streaming source with DD+/DD 5.1 (Netflix, Amazon) Games with DD+/DD 5.1 Bitstream → Dolby Digital Plus Multichannel 5.1* Local source with DD+/DD 5.1 Streaming source with DD+/DD 5.1 (Netflix, Amazon) Games with DD+/DD

Both Sonos Arc and Apple TV only have HDMI port. Since Dolby Atmos does not seem to work with Airplay (correct?), I would need a HDMI splitter to connect both the Arc and my old projector. Would that work? What kind of splitter would I have to buy for DolbyAtmos to work? Or is there another possibility? A Toslink splitter for example? Thanks a lot for any advice!

Good watch, pretty much nailed it on the head of what I would like to see introduced this year. I am still not completely satisfied with my ARC yet.DTS6&7 channelupward firing speakers on surroundstraditional' home theaterChromecastpassthroughs24bit from streaming service360 speakerShowing audio format on main menu for all sources not just ATMOS