Home theater

I’m thinking of buying a Sonos surround set that has Beam, Sub and two One SLs. My question is can I listen to music on a stereo pair of the SLs and the sub as a group. If so, how easy is it to do this? Tried to search and read all the existing topics but could not fin the answer. 

I recentlly buyed Sonos ARC with SUB and to be honest sound quality can be compared to 150€ home cinema systems. I had before Sony DTR 1080 reciever with DALI SUB and speakers. Comparing to this setup is like day and night. I was expecting much more from SONOS for this amount of money. If there will be no update I’m allready thinking to go to other brand. SONOS please fix this as soon as possible.

Hi! I am interested in buying a Sonos Beam 2 abroad in Australia, as it has much better pricing than what's available locally where I am based. But of course the challenge will be getting it home on the plane. Ideally would handcarry this in it's packaging, but I think it's a little too long for carryon dimensions both boxed or unboxed. I think it should be able to fit in checked baggage for sure unboxed, but of course that eats up a lot of space. Has anyone actually tried transporting a Sonos Beam via plane before?

When I turn my TV on the volume is always on low so nothing can be heard, even if it was previously on loud. I have an Sonos Arc connected to an LG TV. This also happens if the tv is paused for a prolonged time, the sound goes back to a minimum. Any idea how I can fix this?

Hi everyone, I have a Sonos One and a Sonos One SL, I want to connect them through Wi-Fi to my Samsung TV the frame. Is it possible with Sonos Boost ? Or only with a soundbar like Ray? 

My tv and Sonos Arc sound bar are in the front right corner of my living room. I use two Sonos Five speakers for my rears. My sitting position is very close to the right rear Sonos Five. The left rear Sonos Five is about 11-12 feet away. I am wondering if I add a Sonos One to the front left (also about 12 feet from my sitting position), would I get more left side sound than what I am currently getting?

I have two configurations, one LG TV (2018 model 55SK9000PUA) connected to a Sonos Beam (Gen 2) using HDMI ARC and another LG TV (2019 model 43UM7300PUA) connected to a Sonos Ray using optical. When the TVs Digital Sound Out is set to Auto (Bitstream) it struggles with dialog sync; the severity varies between programming. If I set the Digital Sound Out to PCM there is no problem. The sync issue is more difficult with the Beam connected by HDMI ARC than the Ray connected by optical (why?). In the former case, setting the AV Sync Adjustment (on the TV) to 3 seems to provide pretty good correction. The audio quality of PCM vs Bitstream in the Ray configuration does not seem to make any difference. Even when set to PCM the Ray (with Sonos One surround speakers) produces surround sound for relevant content. This seems to conflict with reports on the internet that PCM is only two channel; can someone clarity that in this context?Bitstream in the Beam configuration produces a fuller sound tha

Before I remove my Sonos Arc and run an optical cable behind the wall, I thought I’d ask here first.Has anyone tried connecting a music server (BlueSound NODE) to their Sonos Arc via optical out from the music server to optical IN on the Sonos Arc?  Wondering if that works.  Logic says it will, but who knows?Thanks for any responses!

I am a new owner of Sonos system (Arc, Sub and 2 One).I'd like to ask if it's possible to connect an EPSON EH-TW9400 projector (no HDMI output or optical port) to my Sonos Arc to get audio dolby atmos.Is it possible If I use HDfury Arcana or any other HDMI adapter?Thank you in advance.

I have an arc and just bought 2 one sl. Not golding good surround on any streaming app whether using native to TCL 65R625 or through apple tv 4k. Currently have TV audio setting at auto for digital output format but have also tried pass through and custom. Apple TV setting is auto, Atmos Available. Sonos app will even show that the sound is Atmos when available. Thanks for any advice

I currently have a Sonos HT set (Arc, 2x One SLs, Sub (Gen 3) connected to a PS4 Pro and a Samsung Q90T. So it’s PS4 Pro > Q90T > Sonos Arc HT. I borrowed some Blu-ray DVDs from a local library and noticed that they only have Dolby DTS-HD Master Audio tracks in English. However, I can only get Stereo PCM when playing the movies via the Arc.  I tried various combinations via the PS4 Pro “Sound and Screen” menu > Audio Output Settings > Audio Format (Priority) - (Linear PCM or Bitstream (Dolby or DTS)), the Pro’s Blu-ray DVD settings > Audio Format (Linear PCM or Bitstream (Direct)), as well as the Q90T’s Sound > Expert settings - HDMI-eARC mode (Off or Auto) and Digital Output Audio Format (PCM, Auto, Pass-Through) and I can’t get “surround” sound only Stereo 2.0. I researched (lurked) on these forums as well as Reddit for possible solutions, but nothing worked with the various settings I mentioned. Only thing that comes up is possibly getting an audio extractor, but I

Can someone verify that the 2022 NEO Samsung TVs work correctly with ARC/Beam? I know previous years models did not and people ended up using the HD Fury Arcana. I am about to do an install and the client is demanding Samsung, Specifically the QN90B, has anyone tried that model with the sonos arc and/or beam?

Hi All. Very new to the Sonos world and having a slight issue with my Arc disconnecting from my WIFI every day so I need to unplug it and restart it. (quite frustrating) I have a Sonos Arc and a Sonos 5 setup as separate room’s one for Arc for TV and Alexa and the 5 for my Turntable.The Arc and 5 are 3 feet apart and are both “connected” via WIFI The arc drops from the WIFI causing Alexa not to work and the 5 is fine.  Any Ideas??

Hi, the most recent 14.18 update fixed the subwoofer issue with TruePlay tuning on my setup (Arc+Subx2+Fivex2), but made the rear surround speakers significantly louder than before.Any surround sound dialog sounds like it’s at least double the volume when projected from the rear when compared to the front. Is anyone else running into this problem?

Newbie here i want to group sonos arc, sonos sub, sonos amp and a pair of sonos ceiling speakers to make a 5.1 setup for both my TV and music. I’ve heard sparingly that there may be a delay in TV audio etc.Please advise if this is doable and recommended.

Can Ray cast the sound on the TV to my two Sonos ONE speakers as front left and right?

Hi - I’m trying to maximize the Sonos home theater experience (to the extent that is possible).   One bummer…..wife will not let me install an Arc Soundbar under the TV.   So I’m purchasing two invisible Sonance speakers that will hide in the drywall on either side of the TV.   After reading many posts on here….this is my plan: Buy 3 sonos ampsFirst Amp will power the two sonance speakers mentioned above to create a phantom center.   Since I can’t get an Arc, my hope is that these two speakers will be an adequate substitute for center channel dialogue.Second Amp will power two additional FRONT speakers on the far left and far right of our living room for to expereince the true left and right channelsThird Amp will power two additional speakers on the rear left and rear right of our living room for rear surround sound.Finally I’m adding an Sonos Sub to the set up. Will this work to allow me to experience a 5.1 home theater set up?   Or will the first two amps and speakers mentioned abov

  Hi, I have a Sonos Arc since almost a year, and somehow I’m not content with the sound it adds to my LG OLED TV. Already had a nice call with Sonos Service, and according to the very engaged hotline agent, signal formats, connections, update status and settings were just fine. And I tried Trueplay mit various iOS devices and in multiple runs. The sound is rather “thin”, I’m not really feeling that the sound is much better than the built-in speakers of the slim LG TV. Might I be having a faulty unit that I should send in for service repair? Or is this mediocre sound quality “expected behavior” of the Arc? My questions:Room acoustics: The sound is reflected from the Arc on the one side by a wall, whereas in the other direction there is some open space (see images). Plus, I’m sitting quite close to the back wall. Any chance to get better results with the Arc in this arrangement by changing things in the room, or should I rather switch to some other home theater audio system?  Upgrade to

HiI have a Sony Bravia TV and a Playbar and sub-mini. I moved two speakers from one room to the TV room as I wanted surround sound.  At that moment I lost audio control  of my TV remote.  What did I mess up?    I tried resetting my Playbar.   Succeeded.  I tried resetting the remote ( the sonos app only asked that I press the + button for setup?).  Both attempts appear to work according to the Sonos app, but not Remote audio control.Without using the TV, I get full surround sound.  I thought it might be an IR conflict with my Cable TV box, but it worked before. Help. 

Hello all. Just got my Sonos Arc system. Connected to Epson TW-7100 4k Projector. Using the Feintech VMS14201 HDMI 2.1 Matrix Switch to connect Apple TV 4k and Fire TV 4k. But getting no sound with the HDMI-optical connector. Feintech def supports my projector model. Any help on solving this would much appreciated. Connected the system as in the diagram (attached). I would hate to have to return the system.  

I just purchased the 935 directly from OREI using the current 10% discount ($116.10/no sales tax) to use with my Beam Gen 2, Sub Mini, and One SLs with a 2016 Samsung W/Arc.  Anyone else have the 935; if so, how’s it working?  The only difference I can see from the 931 is that you can connect 3 external devices.  I considered the HD Fury Arcana, but at $299 it was a little pricey, since I spent a wad on the Beam and Sub a month ago.  I’m hoping, “You get what you pay for.” doesn’t apply with the 935.

Hello all,  I got a brand new home theater set up including 1* Beam (Gen 2) with 2*One SL for surround which I’m using with a Smart LCD TV PANASONIC (TX-55A650E) plugged in through HDMI ARC.  Overall the sound is pretty good, but I finally noticed that all the sounds emitted by an external source such as Playstation, Internet TV Box (which are set up either in Passthrough mode or Dolby) are actually giving standard Stereo PCM sound.  The only way I found to get a Dolby or DTS signal is using the TV apps or watching movies through the USB port. Once I’m using an external source, it seems there is no way to get a dolby sounds…   Has anyone ever had this problem and if so, how did they solve it ?  Thanks for your help. Julien

Sonos Arc drops audio frequently when playing media from Android TV where audio source is stereo.No issues with netflix app when source is dolby atmos. TV is new Philips OLED807 2022 model, with latest firmware. Connected via eArc port. Already tried disconnecting power to tv for few minutes.Tried both Sonos supplied HDMI cable and brand new expensive HDMI 2.1 cable. anyone with the magic solution? Diagnosis number 1890521882

As title a - I have the above Sonos speakers in a surround sound setup. Would swapping my Beam Gen1 with a Beam Gen2 make a noticeable improvement?I’m using an LG C8 OLED, with Apple TV 4K connected via Arc as my primary source.  Thanks. 

I’ve just bought Beam gen2 so I can stream in the highest audio quality. However, the Plex app on my 2019 Shield seems to be struggling a little. The Dolby Vision logo keeps appearing every so often as if the video has just started although the stream is fine and lag free. This never happened when playing the 5.1 audio stream. Can anyone in a similar position recommend a solution? I’m using an LG B1