Speakers

Hi,  I have got to one sl's, both of them only have sound coming from the tweeters, nothing from the woofer. Any idea what could have happened? Seems odd for it to fail on both...

I recently renovated majority of my house and had a great system set up. This old system included 3-4 play 3s and two bridges to help connect my living room stereo and garage stereo. After downloading the S2 app, I’ve had no trouble connecting a boost and 2 One SLs on the same account, however, I can’t get anything from the old system to connect to the new one. The S1 app no longer picks up the old system either. What am I doing wrong? And advice will be greatly appreciated! 

Haven’t uses my Sonos in a year. How do I set it up again

I upgraded my iphone (13) and Airplay no longer works to connect to Sonos.  Airplay requires a synch using a passcode displayed on Sonos products.  Obviously , since Ones and Amps don't have screens, I cannot connect.  Any solutions out there?   It is a Corporate issued phone and I have read a thread about this being a possible lock down from the corporate IT end.I am using my wife and kids phones now to play music outside the Sonos App as a bad workaround.

Changed internet providers.  Old wifi equipment is gone, of course, yet after the fact, Sonos instructs me to have both my device/app and the Sonos system on the same network or you can’t switch to the new network.  Did anyone at Sonos think this through?  And it is the weekend, so no phone assistance from Sonos.  Time for this brand to get past 1995 technology.  Do we really have to reboot Sonos to switch wifi, nobody, but nobody else requires this.  Why did I purchase this system (not the first time I’ve thought it was a mistake) 

I am pulling my hair out. I recently changed my WiFi provider so aware I need to move my Sonos one onto the new network however this doesn't seem to automatically take me through the process. I have factory reset the system a number of times and I still get notifications to connect to Sonos temporary WiFi. I tried to connect using the S1 app but diverts me to the updated Sonos app. Not sure what the issue is here but really frustrating. Was working fine until I changed WiFi provider. I have seen other advice to reboot the system which I have done but still no succes. Any advice much appreciated. Thanks 

I have an Arc, Sub, two Sonos One SLs and two Symphonixs - in a single large areaThe Arc is connected to the TV What speaker configurations would this community recommend?

i have a question before i make up my mind to purchase the one SL (bluetooth)currently i playing my ps5 using monitor so i not able to output to a speakerso i have connect my ps5 with a portable bluetooth speaker since the speaker it not supported for ps5 so i need to use Wireless USB Bluetooth 5.0 Adapter Transmitter in order to pair it and it did work however the portable bluetooth speaker sound too lowi  try to find a better bluetooth speaker have speaker watt > 16Wsince ps5 able to use the adapter to connect to any bluetooth speaker, can i do that on Sonos one SL?furthermore what is the speaker watt for Sonos one SL 

Had a sonos system with 2 play 1 speakers set up at my previous residence. Moved today. Couldn’t connect to the system once I set everything up (yes I have a new internet connection and was unable to connect my old system to it). I reset my Play 1’s. I can see them in the app, I go through the set up and the app says connection successful to the play 1 wifi. Then it is unable to find the device. I have been round and round in the app, restarted my phone a half dozen times, rebooted the wifi and Internet modem. I have unplugged the speakers for 5 minutes and reset them again. No luck. Any help getting music at my new house would be awesome. TIA.

BonjourEst ce possible de streamer via VLC par exemple en bluetooth ?On peut connecter une enceinte en bluetooth et streamer avec VLC, mais qu'à d on en a plusieurs, je ne vois pas si possible et du coup quel est l'intérêt du bluetooth. Merci d'avance pour vos retours 

Hello, How can I broadcast music from a bluetooth device (e.g. smartphone) to all Sonos systems of my apartment (e.g. 4 speakers in 2 different rooms)? Searching on the community, it does not work though the Sonos Move. But does it work with: Sonos Roam?  Sonos Era 100? Thanks, Cheers 

How can I use my Sonos speaker to play music from Medici TV?

I have a 10-year-old, WIRED 5-speaker system as well as a 4-SONOS wireless speaker system (3 Ones + 1 MOVE) in our home in Costa Rica. We have a SONOS AMP running on an ARC mesh network with fiber-optic service. After we installed the new mesh network, I factory reset the 4 wireless SONOS speakers; they now work perfectly. The wired speaker network, however, is not connected and remains a question. My questions are 1. Should I reset the AMP to get the wired speakers to work? And if I factory reset the SONOS AMP to get the wired speakers working, will it disconnect from the wireless SONOS speakers? I’m fine if I have to factory reset those speakers after the AMP is reset, but I worry that I might knock the AMP off the mesh network requiring a tech to revisit the house. Ideas? 

I bought my play bar and sub at the same time plus 2 other speakers. I got a new WiFi system and had huge issues reconnecting devises. The old Sonos app insisted I upgrade to S2. Did it and now it’s saying ONLY my soundbar is compatible. So I now only have that working. Every time I go into the S2 app it says to disable the other devices I have to connect them to an earthnet. Why why why. All I did was change my WiFi. I don’t want one product on one app and the other 3 on another. The sub and soundbar were paired. This is a total nightmare 

Hi all, new to Sonos, and having issues connecting my reconditioned play5 gen1 to S1 app on IOS. also I have a yellow flashing light (not green) as all the instructions say.Can anyone suggest how I can rectify this?

I purchased a Sonos Era 100 at Best Buy. Then I ordered a Sonos Line-In Adapter (from Sonos), but it’s back-ordered and it looks like I won’t receive for a month or more. My question is: If my turntable has a USB-B port (normally used for connecting the turntable to a computer), can I safely use a USB-C to USB-B cable to connect the turntable to the Era 100 (without using the Sonos Line-In Adapter and the RCA to 3.5mm cable)? And will it work?

Hello, I’m a brand-new Sonos owner, and I think I screwed up. My setup:Fluance RT85Schiit Magni preampPort2x Era 100Beam (Gen2)My goal: play my turntable throughout the house and also have surround for my tv.   I now realize this isn’t possible when Eras are set to Surround.  I can live with just the Beam for my TV, but the Eras aren’t as mobile as I’d hoped (require power).   Should I have purchased two Moves instead of two Eras?   I’d love for the functionality of listening to the turntable in my living room and being able to pick up and take the music with me to the kitchen, etc. Will the Moves run into the same can’t use with turntable when set to surround issue?(In my defense, I’m a new dad and I’m very tired.) Thank you!   

Hi I hope someone can help me.I have 2 x Connect: Amp (Gen1) linked to ceiling speakers in my home. They run off the Sonos1 app.I have just purchased a Roam speaker with the intention of linking the music indoors and outdoors, however this seems to only work with the newer Sonos app. Every time I try to connect to the roam it knocks me off the Connect:amp system. The new sonos app can not find the older speakers.Is there any way to link these devices and thereby extend my music system outdoors??thanks in advance!

Hi all, thanks in advance for your help. So, my Sonos Arc has starting dropping off after a few seconds when using AirPlay.When I try and cast music from my phone it will play for a couple of seconds and then drop.  CheersDave

Hi everyone, I asked this previously and I’m no Sonos guru..can Era 300s be set up as a stereo pair in one ‘room’ and also as a home theatre set up in another room and switch between the two?I have Sonos arc, Sonos gen 3 sub and 2 x era 300’sthank you

I have 3 play:3’s which up until recently have been operating under the S2 app. recently they all required update but all give error 30 after the initial update has completed and the app is resetting the play:3. I have tried all the recommended solutions through to connecting the play:3 direct to both my router and my Boost (effectively the same thing). Also performing a factory reset hasn’t made any improvement. This led me to trying to downgrade back to s1, but the downgrade also failed with the same error. getting a little frustrated now… can anyone help me please???

I purchased a new Sonos Ray for my son. We hooked that up to his Samsung TV in a snap using an ethernet cable to his router and the included optical cable to his Samsung. The problem we now have is that my older Play 1s (x2) that I gave to him won’t connect. We can get blinking green lights on both but, they continually fail to connect.Prior to giving him the Play 1s, I “removed” them from the room they had been in and then I reset them using the Play/Pause and +Volume button procedure at my house.  At his place, everything seemed good-to-go… until we tried adding them into his newly created  Sonos system/network (he never had a Sonos product until now). It would say “Connected” but then kept trying to connect and then fail. After several attempts, we unplugged them.My questions: Could the Play 1s still be linked to my system/account?  Do we need to connect the Play 1s via ethernet cables? (It’s my understanding that the Ray will shoot the sound to the Play 1s).  Do I need to hold down

Bonjour, la lumière led de mon mon enceinte sonos One, s’est allumée toute seule la nuit, alors que j’ai choisi le mode veille. Quelqu’un aurait-il une explication ? 

We live in an old building with the thick wooden walls in most parts. With the 11 Sonos devices spread out through the building and a wired Sonos Boost in a central location the system works mostly fine. Last couple of weeks we have been starting to get entire system drop-outs and the culprit as we can see is a IKEA Symfonisk lamp (most remote unit from the Boost) that according to the Network Matrix jumps between being Secondary node (direkt to Boost, signal 30/29) and Tertiary (connected to the ARC that is in line-of-sight with signal 66/59).During these jumps, music stopps playing in the entire system and in controller apps the rooms are gone briefly and then gets back.Why is the mesh reconfiguring so aggressively? I understand the lag to tertiary nodes but the stop in streaming is worse than a lag I’d say.Can I do something? We have a multi-API Unifi network that I have been testing with Sonos but these experiments have all been disastrous even when trying to follow Unifi and Sonos

Hi there. Am really hoping someone can help me!!! We have recently moved home and had Virgin Media broadband installed with their “Hub 3”. However my Sonos is not connecting to it. The Sonos app is giving me the attached troubleshooting suggestions, but I can’t see anything in the router settings which would allow me to action that (please also see attached). Can anyone help me please? Thanks a million.