Components and Architectural

HI!I CAN USE 4 SPEAKERS OF 8 OHMS EACH MAKING IMPEDANCE MARRIAGE IN 2 OHMS AND ONLY PLUG IN ONE AMP CHANNEL? I ALSO HAVE 4 SPEAKERS OF 4 OHMS EACH, I WOULD LIKE TO CONNECT EACH PAIR IN PARALLEL (2 OHMS) USING THE TWO CHANNELS OF THE AMP. I CAN DO THIS? THANKS

Howdy All, I have one of two S2 speakers that alerts an unwanted “bong” alarm daily at midnight and I can’t figure out where the command is activated. Diagnostic number :846578419.  I’ve check all my phones and tablets to turn off or quit Sonos activity but the midnight bong continues. Any help much appreciated.

I have a LG C8, Sonos ARC+ Sonos SL Ones x2, Chromecast with Google TV - something it randomly disconnects from the Sonos arc and I get this volume bar at the bottom. Has anyone else experienced this? No sound will come out.   

My sonos speakers keep going line or are not in the app. I’ve done ever troubleshooting exercise and talked to the support desk. This problem seems hopeless. Is there anything I can do to escalate and get a result? My system was fine for years. I’m frustrated and want to throw all this stuff out.

Hello!DO I HAVE THE ABILITY TO USE 4 8 OHMS SPEAKERS MAKING IMPEDANCE MARRIAGE IN 2 OHMS AND ONLY PLUG IN ONE AMP CHANNEL? ADDITIONALLY, I HAVE 4 OHMS SPEAKERS AND I WOULD LIKE TO CONNECT EACH PAIR IN PARALLEL USING THE TWO CHANNELS ON THE AMP. CAN I DO THIS? Thank you.

I have been having ongoing issues with streaming SirusXM for years now. This is one of my main uses of my Sonos. Now the stream plays for 15 min at a time and the cuts out with an error stating “Unable to play ‘channel here’ - the song is not encoded correctly.” 

Rang service support last week because having changed wifi routers and set up Sonos again, whole system disconnected. Went through various steps. Got it working again. Now it’s gone again just a week later.  had previously done various factory resets etc.  any ideas (a) how to reconnect a system of 6 speakers without doing resets on all? And (b) how to stop this happening repeatedly? diagnostics report number is 158033540 many thanks!

Hi. There are a number of threads about this I know, but we´re stil having trouble, Recently upgraded to S2 without really giving the matter much thought. We now have three components working on S2, but there is an incompatible Bridge which has not been used for ages also showing. It is preventing further updates and the inclusion of two other components we had on S1 and still want to use with S2. These two were not plugged in at time of updating to S2 but they are S2 compatible. We have tried several things a number of times, including an attempt to factory reset the Bridge to remove it from the S2 system, but it seems to not want to let go. There is no component removal option for the bridge in S1 either. It shows the Bridge as part of the S1 system and our three working S2 components as incompatible (understandably). Any ideas?There also seem to be several areas in the Sonos help pages that don´t match up with what we´re seeing in the apps (S1 & S2). The S2 app won´t allow us to

Hi Everyone,I would appreciate your input on whether I can achieve what I am trying to. Background:  We did a big renovation 10+ years ago.  As part of that we had in-ceiling Bose speakers installed by our contractor.  One pair in the kitchen, one in the adjacent fmily room and a pair outside on our deck.We elected to drive these via an Onkyo Surround sound receiver which allowed an A & B zone (generally because we wanted to select between music inside and/or the deck).This worked ok once I fiddled with the surround levels (I know, I know).However, we now mostly listen to music via digital sources which I couldn’t easily do with theAmp/Receiver. So. . .I bought a Sonos Amp and a Russound SDB-6.1 (which I realize now is more than I needed, 6 PAIRS, not 6 speakers). I wired the Kitchen pair to Speaker 1 L & R on the SDB-6.1, the Fam Room to Speaker 2 L&R and the Deck to Speaker 6 L&R.I then connected the SDB-6.1 Amp #1 connections L&R  to the banana plugs for the Left

I have 5 sonos amps in my IT closet. I have 3 sonos subwoofers around my home, each designated to amps in the closet. They are all on my wifi (wifi coverage is great all over the home). The subs are too far from the amps to pair, will purchasing a boost and hardwiring it to the router fix this? On sonosnet does the sub still do ad-hoc to the amp itself or does it use sonosnet to pair to the amp?

Has anyone found a way of controlling the sound of a Playbase with the Magic Remote of an LG OLED G2 (2022)? In Device Connector (or rather “Universal Control Settings” as it’s now called), there is no Sonos available in the list of vendors, when setting up the Optical output...

HelloPocketCasts has stopped working through the S2 app. When trying to play a podcast it says unable to play selected item. And when trying to choose a podcast either no podcasts come up or it says unable to browse music. I have tried rebooting my router, reauthorising my PocketCasts account, removing the service and re-adding, but no luck.Thanks

Last night, there was a power outage at my house. When the power came back on, most of my Sonos products came back online. But not my Sonos Connect. After a factory reset, my Sonos app was able to see the Connect. But I still can’t get it back online. Is there a step I need to take? Do I need to hardwire the Connect to the router in order to bring the Connect back online? It’s stuck at this stage: 

Hi! I have a ZP120 amp connected to two bookshelf speakers that I use for music playing. Is there a way to connect my TV to it? Keep in mind these ZP120’s do not have the HDMI ARC connections that the new Amps  have. It only has an analog Line-In input and two ethernet ports. If it IS possible, my next question is about how it works: I don’t want to have to open the sonos app and select anything when I use the TV--I just want to turn the TV on and have the sound come out of the speakers… Thx!

What does Sonos normally offer or do to it's customers if there outside the warranty period for S2 devices that are defective? Do they normally provide a discount on new purchases and if so, what kind of discount? Or would they maybe see about a full unit replacement if it gets escalated to a manager?

Hi AllI have a sonos 1, Ray and roam all in the ground floor and all connected by wifi.I also have a wifi extender which is mainly there when I go to the garden.When I tried to group all 3 devices (whilst in the house) I get the error message ‘wireless range extender, cannot group’So, I bought a boost, installed it but still get exactly the same message so it appears it was a complete waste of money.Any ideas? Have I done something wrong?many thanks  

It says “Sorry, we can’t connect to Sonos.  Let’s try some things: ...” It was working fine on this PC untill I switched from the ATT Wifi to an Orbi wifi.  Like I said in the title, our phones still work fine, and they’re on the same wifi as the PC.  All my speakers appear fine for the phone S1 app. I tried resetting the PC S1 app -- no difference.  It searches for about a minute, and says it’s connected, but then after I click OK, it says “Sorry, we can’t connect to Sonos.  Let’s try some things: ...” PC Wifi is is set up as a Private Network and is not set up as a Mobile Hotspot (no Internet connection sharing). Setting it to a Public Network did not help. I tried putting a cat 6 from the PC to my Sonos Boost, and the Internet still works from the PC, but no change to the S1 app on the PC failing to connect to my Sonos system. Diagnostic report: 1543599904

Intermittent, very brief cut out of sound from Samsung TV through Playbar. Happens on all TV sources - cable box, android box, streaming services. Optical cable connection. Does not occur while playing music. 

I have trying to understand the source of some recent internet issues, and I notice that Sonos connects to several destinations each hour, to check time, amazon web services and firmware.  But one of my Sonos devices has been connecting each hour to three IP address that I do not understand.  They connect through UDP 123 (ntp)  to185.117.82.71 (Bulgaria)5.196.160.139 (France) 81.7.16.52 (Germany)After disconnecting this Play 3, I don’t see any other Sonos devices make connections to these IP addresses.   Does anyone else see connections to these addresses? 

Bonjour,J’ai un soucis. Je m’explique : j’ai configuré mes sonos one en paire puisqu’elles sont dans le salon et dès lors que j’écoute la musique ou que je fais fonctionner ma télé au travers de mon Apple TV, une enceinte fonctionne mais pas l’autre. Dans ce cas, je suis obligée de supprimer la paire et la reconfigurer systématiquement. Parfois même, l’enceinte ne fonctionne plus en plein milieu d’un film ou autre. Et je dois refaire ce même mécanisme pour que ça fonctionne.Pour votre info : elles sont connectées au wifi (j’ai la fibre) Auriez vous une solution pour résoudre mon problème, svp ? Par avance, merci ! Belle journée.Amélie 

I have a sonos one speaker which had become temperamental to connect to, so I reset it.  Since then I’ve been able to connect, but the status light has continued to cycle through a series of colours.  It’s being doing so for about 18 hours now, with the cycle being: Green: 6 seconds flashingWhite: 6 seconds solidRed: 6 seconds solid Orange: 6 seconds solid Any ideas what might be happening?

BuongiornoHo acquistato il giradischi Giradischi Pro-Ject T1 Phono SB per ampliare il mio impianto sonos, ho collegato l’uscita del giradischi all’ingresso del port ho configurato l’app sonos dopo aver acquisito il tutto, al massimo volume sento molto basso, qualcuno sa darmi qualche info per risolvere il problema..Grazie

I have 3 Sonos One speakers and a Sonos Move connected to Wi-Fi. My iPhone can connect to the speakers. Music appears to be playing on my phone, the volume is turned up and it appears to be connected to the speakers but no sound is coming out of the speakers (except if I switch the Move to Bluetooth). When I open the Sonos app on my iPhone, an error message appears “Unable to connect to Sonos. Let’s fix it.”  Proceeding through the repair wizard doesn’t fix the issue. I have checked my router and the speakers are appearing as attached devices and they have obtained an IP address. This same issue occurred once before and eventually it resolved itself. However, it is not resolving itself this time. How can this issue be fixed?

I have a selection of Sonos speakers.2 Fives, 4 play onesPlus 2 bridgesAll are old and can only operate under S1.Each device is hardwired into my network and each has a static IP address.I suffer with multiple dropouts, mostly with streamed radio.Groups fall apart, and have to be remade or alternatively everything just stops.With the upgrade discount I can replace all this kit with the latest versions, I’m just not sure the problems will go away!!Any thoughts? 

Yesterday I noticed that I cannot retrieve the metadata of an item (a track/song) via the browse method in the UPNP interface. It doesn’t give and error, it just responds with default info. To make sure I wasn’t mistaking, I tried the same on an S1 (old SW!!) only capable player (with latest S1 SW) and there it still works. Anyone seen this? I suspect a bug on one of the latest S2 variants of SW or worse, I deliberate change, but that would make no sense,