Show off your setup or get inspired by others
Recently active
HiDisclaimer:The following is not an everyday occurrence just once in a great while 😂This is not a hardware/software solution more aptly it’s a “try-it” to see if corrects the lip sync issue. It more so involves AV cable/stream viewing.After adjusting the Lip Sync in the Sonos app and still no Joy. Stop the AV stream either by turning the TV off or temporarily switching to another stream. I’ve found it fixes the issue 100% of the time when the Sonos app lip sync adjustment doesn’t correct the issue to my liking. I guess it resets the stream so to speak. So give it a try.. you have nothing to lose kind’a 😊 Note:You will most likely miss a portion of the AV Stream unless you can time shift to recover the missed portion.
I am currently reshuffling my living room and was thinking of switching to Sonos.The initial reason is that I really enjoy the ERA 300 aesthetics, but I can’t figure out a rational configuration to suit my needs.In the same room, I would either :listen to the turntable. I wish to use a 2 speakers stereo configuration. watch tv through a projector (with HDMI arc)A pair of ERA 300 + a beam gen2 does not work, as the ERA would have to be configured as rear channels of the beam, and would not be usable as an entry point for the turntable.Then I thought to a Sonos Amp, able to deal with the turntable and the HDMI, but the Amp is not compatible with ERA 300. Is there any configuration that would make sense for my requirements ?
Hi, my wife and I are building a new home and we have to make a decision on prewiring for surround sound. In our old home I prewired and had a wired Bose surround setup with a receiver. Our new home is open concept. Considering that, my initial thought is to set up the surround sound using Bluetooth or WiFi. I don’t want to have to plug in rear channel speakers and I would rather not pay for in wall wiring. I am hoping that there is a rechargeable option I have no issue with the front channels and sub being wired but again would prefer they not be. I am hoping that someone who knows more than me can give me some ideas/suggestions Thanks in advance for any help.
I have a brother who’s Samsung Galaxy automagically connects to Bluetooth devices without permission or normal manual pairing. Is there a way to disable Bluetooth from the Move so unauthorized users don’t have access?
I just bought a Sonos Arc and planning to get a sub. and two Sonos one Sls for surround sound system. Iam completely new to Sonos and will appreciate advice. I heard that I cant stream music from my Android phone to the Arc or the SLs..Is that true? Is there a way a round it? Iam not into Iphone and dont want to buy an iphone just to be able to use Sonos. I can purchase the Samsung Q990C this weekend at a good price and Iam wondering if I should go for that and just sell my new, unused Arc?
Hi all! I’ve had my Sonos playbar and Play 1’s since 2016. I’ve NEVER had problems out of them until recently. I’ve searched high and low for answers and have even been dismissed by customer service (on my first and, subsequently, last call to customer service. My IR sensor wasn’t reacting to my Apple remotes volume changes. Well, I’m happy to tell everyone, I’ve figured it out. In your Apple TV settings, go to:- Settings > Remotes and Devices > Volume Control > TV via IR Apparently, this changed in a recent Apple TV update and was reset to Auto. This is the fix that worked for me so give it a shot! I really hope the hassle of using the Sonos app for tv volume is no longer an issue for us. Have an amazing day, everyone!
I have installed a Beam (G2) and a mini sub as a surround system on my LG TV.I would like to extend the width of the front sound stage so I bought 2 Era 100s to use as Front Left and Right. I found that when setup as satellites with the Beam they will only operate as Rear channels.My room doesn't allow rear channels (physical restraints). Please allow the two Era 100s to operate as front Left and Right to broaden the Beam.
I am not pleased that the Beam does not offer a headphone jack. I bought a fantastic pair of headphones and plan to use them to listen to music and tv most of the time. Since the Beam doesn’t have a jack it will likely be replaced by a new more versatile soundbar or I singly will go back to mostly using my A/V receiver. Probably won’t bother with any other Sonos products in the future.
So I recently picked up the Sonos Arc + Sub and a Samsung Q90T TV (which has HDMI 2.1/eArc) and I am experiencing the sound cutting out periodically. Some details: Only devices I can test with are an Xbox One S, Xbox One X and the built-in Samsung TV Apps Sonos, Xboxes and Saumsung are properly set to have Dolby Atmos I have experienced sound cutting out on both Atmos and 5.1 I have experienced sound cutting out from both the Xboxes as well as the built-in Samsung TV Apps (only tested the Netflix app) . . . so I know the Xboxes aren't the issue At times the sound cuts out very infrequently (minutes apart) and other times about every 10 to 20 seconds and there is no discernible pattern on what changes this. There is a sound setting on the TV showing ‘sound output’ that should should normally say ‘Receiver(HDMI-eARC)’ when you have the ‘HDMI eARC Mode’ set to ‘auto’ but sometimes shows ‘Receiver(HDMI)’ instead (as if it lost the eARC signal). The most st
Hi all, Any idea if I can connect a single ERA 300 directly to my TV or Cable box to use as a sound bar. I all ready have several SONOS speakers including a sound bar. I just like the idea of using the ERA as a stand aloan.
I took a look at previous conversations in the community pool and it’s been five years since someone suggested Sonos create easier access to the sub controls. In that time the app was updated to S2, and the Sonos sub mini was released. But no effort was made to make access to the controls easier, despite numerous Customers requesting it. It’s strange that even in night mode, the sub isn’t turned off. It’s obviously not appropriate to have loud noises at night especially when you live in an apartment. I don’t see why it takes four clicks to get to the controls just to turn off the sub, Which is something that I find myself having to do at least twice a day. There’s not even a feature to use voice controls to modify the sub. The request for this feature isn’t unreasonable, difficult, or crazy. What’s crazy is that After five years, it’s still an issue.
I use the ambient music app Endel, but can only play it on my phone or over Bluetooth to my guitar amp. Would be great if there was an integration available for this service.
Hi everyone. We are a long time Sonos family that has slowly evolved over time with our home theatre. We started with a Playbar and have added a SW plus two Ones. We recently purchased the Arc and after a lot of research upgraded to the 300s. Here’s our observations:Our “theatre” is in our basement and has 8-9 foot ceilings with a 65” OLED that supports eARC. The room is a rectangular shape which puts limits on where we can place speakers. We have our 300s on stands behind out couch facing directly forward. They are about a meter behind our couch and 2.5 meters apart. We noticed a nice improvement each time we upgraded or added speakers. With the Arc and Ones we generally had good Atmos effects. This is likely due to the height of the ceiling plus our location from the Arc (7 feet back). With the Era 300s we have gone from good Atmos to very good Atmos effects. We can now clearly hear overhead sounds going in all directions including diagonal. It is not overwhelming or detract
So i have a set up like this:1) Sonos Arc2) Apple TV 4K (2nd gen)3) Benq HT3550 Projector is it possible to have eARC work? Problem 1:As of right now the main problem is that sonos arc connects to apple tv via wifi. This makes it “temporary” source and sometimes i start a movie and then go back to apple tv setting to change the source because once in a while it will switch back to the projector speakers Problem 2:Apple TV only has 1 hdmi port. Should i get one of those hdmi audio extractors and connect Sonos arc into it? Will it work? Will eARC work? Could you please link me to one that will work on Amazon? Do I need anything else for this to work?Note: I have this cable to connect Sonos Archttps://a.co/d/4iV1WqcI found this device and almost bought it, but then in the product images it says it won’t work with Sonos Archttps://a.co/d/688PCPRSonos Arc does come with HDMI to ESPDIF adapter and i read that a direct HDMI connection to eARC is preferred. Also just to mention, I would like t
Hello, I am trying to decide between Era 100 and Era 300 to use with my ARC and sub (gen3) as surrounds. My wife agreed to the sonos rears as long as they are not visible. So my only option is to put them behind the sofa (which has about 8-12 inches of clearance to the wall). I am using Era 100 now behind the coach with the left and right speaker facing each other. The sound is as good as expected in this scenario. I still have the option to return the 100s and try the 300s, but i wanted to see if it is even worth the effort. I know the 300s have more side and top facing speakers with Atmos. I am worried they may be too big for my situation and may not offer any advantage over the 100s in this limited space. Anyone with a similar setup, or some advice? Thanks in advance.
Je viens d acquérir une move 2, elle se connecte à ma platine vinyle elipson en Bluetooth sauf que je n ai pas de son. Pouvez vous m aider ? Mon but était d écouter mes vinyles.......
HelloTell me where to find the technical specifications of the speakers? descriptions of what kind of speakers they are, how much power they have, what hertz, I can’t find anything on the Internet except marketing informationinteresting : sub gen 3 and arc
Hello,The highlighted area has a hollowed out grill covering, and I am looking for which speaker to install behind it. They would be used for a Samsung frame TV. No audiophile requirements, just acceptable sound quality.So far I am thinking either double Five speakers, or double built-in wall/ceiling speakers. The problem with the latter is that I would either need to rotate the wall speaker 90 degrees to fit, or install the ceiling speakers that don’t face downward. I considered a soundbar but the consensus seems to be they shouldn’t be placed high up. I would prefer to leave the are below the TV empty. Thankful for any advice or thoughts!
I have a Sony TV, Sonos Beam and BT TV Box Pro. Generally all works well. However, if I set the TV Box to output surround sound, the lip sync problem is so great that it is unwatchable. I imagine that that is because the TV Box is not processing the sound fast enough so that there is nothing to be done. However, if anyone with a similar set up has found a solution, I would be interested to hear it.
Upgrade my parents to a new TV and Sonos Beam. They have Apple TV and Direc Tv. What’s the easiest way to set these up so they can use the sonos for both? Appreciate the assistance
I have a Play 5 Gen 2 and was hoping to add a new Five to form a stereo pair. I have just discovered this is not possible and I have to either buy two Five's to achieve this or find myself a second hand Play 5 Gen 2 to marry up with my existing.I'm now considering other options such as a pair of One's SL (still available) with a mini sub. Has anyone any experience regarding the sound quality of this setup compared to a pair of Fives?Also looking at a pair of Era 100 with or without the mini sub. Anyone got any thoughts?
Sonos Playbar cutting in & out intermittently when playing music if the audio optical cable is connected to Sony XBR-75X950H TV and the TV is turned off. If I unplug the optical cable from the Sony TV (TV power is off) the playbar does not cut out and plays continuously with no problem.The playbar does not cutout when the TV is on and audio optical cable is connected with the TV sound coming through the playbar (surround sound).
I’ve been a SONOS customer for around a decade and I’m considering moving to something else….WHY? I don’t understand the app I don’t know how to launch anything I’m always confused I get lost in the menus and options Search doesn’t work wellI am probably a complete idiot, but I have difficulty navigating the new app...eventually, i get something to play, but I don’t really know how it happens. I hunt and peck around and eventually, I get something to play. Granted my home system is 10 Sonos Amps and architectural speakers - it is complicated. But you almost need to stupify this down to a google search window that you can type in “Please, for the love of GOD, play Taylor Swift in my daugter’s room so she will start her homework. I don’t care if you use Pandora or Tune-In or YouTube or Apple Music or any other source, but please please please start playing Taylor so i don’t have to try to navigate this darn app for another 5 frustrating minutes!!!” - I guess voice control might solve
I have a ton of playlists I wanted to share the lists with a couple buddies (just the lists not the actual music) SonoSaver (search for it on the web) does the job.I can save each Playlist as a CSV, convert then to Excel, clean up and sort to my hearts delight and pass along.
Hi, I have a pair of Play 5 speakers that I have connected to our television via line in. I would like to be able to control the volume with the Xfinity remote. Has anyone cracked this? The Xfinity remote code for SONUS does not work.
Already have an account? Login
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.