Home theater

I have a Playbar. The router is not in the same room. Can I connect the playbar to my wifi network, or MUST i have a Ethernet connection? If I connect the Sonos to Ethernet via a repeater, will it work?

Gentlemen, I'm just pondering the perfect setup in regards to 'sliders' for perfect settings.... I have the sound bar, and sub, with 2x play 5's acting as the surrounds. My 2x play 1's are downstairs for other uses. This post is referring to perfect level of bass in sub, i.e. increased to max, with sound bar with bass setting at 0,and surrounds at 5%, blah blah blah for example... This is not a 'why use play 5's for surrounds' topic... i have the money to waste, they are surrounds... PERIOD!! But all jest aside, your thoughts would be much appreciated, as i haven't 'tinkered' much with these phennomenal products, and want an atuned setup. Much obliged.

Current the full 5.1 setup with play 1s as my left and right. Has anyone had experience using play 3s as the left and right? Was there a big difference in sound? I currently have 2 play 3s on the way. Deciding if I should place them around the house or change them out with the play 1s and put the 1s around the house.

Hey all. I'd like to replace my current speaker setup, which is a 5.1 Energy setup, with a playbar, sub, and two play 1s. I currently have a Pioneer VSX-1019AH that is acting as the brains for TV, Roku, Mac Mini, etc. The TV is mounted above and only connected to the receiver via HDMI into the one and only HDMI out port. Since the Playbar only has optical audio, I don't know how to do this and still have my receiver run everything. How do others set up a system with multiple sources with a Playbar and receiver? Seems like it was designed to only plug into the TV. I'd rather not have to go buy a new receiver to do this and I can't plug everything directly into the TV. Thanks for the help!

I am planning on buying a Playbar, Sub and 2 Play:3's, mainly for use as 5.1 hometheatersystem. I also want to connect my Pioneer DDJ-Ergo-K dj-controller, to the SonosNet, in order to be able to hear my mix trough all Sonosspeakers. How can i do this? I already know that Sonos has the Connect and Connect:Amp, which have an analog input that i can use. If this is really the way to do it, do i use the Connect or the Connect:Amp? I do have 1 doubt; i have found on the internet that when i connect a mixer to the Connect (:Amp), there might be a slight delay. (The music in the headphones is not in sync with the music played trough the speakers, which is not acceptable when mixing). If there will be a delay, i could use a receiver: Connecting the Pioneer dj-controller to the analog input of the receiver, then connecting the receiver with HDMI to my tv, which has the Playbar connected on it. The Playbar will send the music to the other Sonosspeakers. Is th

Can I use the optical output on my Iinet fetch box as my Sony Bravia tv doesn't have an optical socket. If I get an optical to digital converter what sound quality will the Playbar play?

Will the Playbar ever support DTS decoding?

This appears to be a firmware upgrade job to other marques. Can Sonos do that too? http://www.whathifi.com/advice/dolby-atmos-what-it-how-can-you-get-it Onkyo has released two AV receivers: the TX-N1010 and TX-N3030, a network AV controller, two home cinema in a box packages, and two speaker packages. Along with the new products, Onkyo has announced a firmware update for the TX-NR636, TX-NR737 and TX-NR838 AV receivers. The update means that owners won't need to buy a new AV receiver to benefit from Atmos (just the extra speakers). And you won't have to have in-ceiling speakers. Dolby’s hardware partners will also produce side speakers that aim to do a similar job. Watch the video. Read more at http://www.whathifi.com/advice/dolby-atmos-what-it-how-can-you-get-it#H8X237ssDpp1QHw1.99

Thinking of splashing out on a Playbar and adding in my 2 Play 1's to give me surround sound. Questions: 1) If my TV Optical isn't passing through full 5.1, will the above set up still give me a version of surround sound (albeit without the sub)? 2) Could I connect the optical cable directly into my XboxOne instead, and get true Dolby 5.1 (From Netflix, Blu Ray and Games), again, albeit without the Sub? Thanks in advance.

Hello, I am interested getting a SONOS PLAYBAR + SUB (and eventually extend it later to 5.1). I want to use it only as a PC speakers replacement, thus not planning to have a TV connected to it at all. I use my PC as TV (analog TV card) and watching e.g. Netflix over the PC. For now I have a 5.1 PC speaker system that I connect to my PC integrated sound card via stereo jacks. My audio card has a SPDIF output. In case this is possible, I also get instant audio signal without any delay, right? Thank you for your answers

Need help setting up my sonos 5.1 please, I've got it set up with a tandak switch Plugged in is a xbox one - showing in app as working as 5.1 Firestick - stereo Popcorn hour - stereo And sky box- stereo The switcher has options pass , 2.0 . 5.1 options for audio which does this option need to be set on 5.1 obvious choice but still getting stereo ?

I just added two Play:1s to my Playbar and the result is fantastic. The Sonos app is showing Dolby Digital 5.1 and Im happy with the audio when watching via DirecTV. I also have Plex hooked up to this same setup and Im having an issue with getting the surrounds to return audio. If I tell Plex the receiver is capable of DTS, I get no audio. This is as expected since the Playbar doesn't support DTS. Once that's disabled I do get audio but not always from the surrounds. If the movie is encoded with just AC3/Dolby Digital, I get all five zones. If the movie is only DTS, there's still audio from the Playbar, but nothing from the surrounds. Is this because Sonos (or Plex) is down-mixing the audio to 2.0/stereo? In every circumstance the Sonos app shows DD 5.1 for about my system. What am I missing? .sal

Wondering if Sonos can support 2.2 channel audio. Can I use two subwoofers with the sound bar? I'm assuming the optical output from the TV is 2.2 channel.

I've not been able to get my surround speakers to work since I bonded them to my Playbar (they are connected to a Connect:Amp). They worked fine as a separate pair prior to being bonded. I've set them to 'full' rather than 'ambient' and confirmed that the audio stream is DD5.1 but no luck. I'd like to un-bond and re-bond them but I can't find the option to do this on the PC or iOS Sonos controllers. I've read there should be a "Remove Surround Speakers" option in the "Room Settings" section but it's not there! Did this functionality change in a recent upgrade?

Hi, I apologise if this has been asked before but I did a forum search and couldn't find an adequate answer. Hi have a rather old TV with a large base stand which means that there is not enough space to place my Playbar in front of the TV on my media cabinet. I have a void behind my TV so cannot mount the playbar on a wall above the TV. I was wondering if there is a product out there (Sonos or third party) which would allow me to mount the Playbar above the TV, attaching directly to the bracket mounts on the back of my TV? Also, if such a product exists, would I also need to by the Sonos Playbar wall mount bracket? Cheers!

Does using a Sonos System make my computer/wifi at home more hackable?

I can't get my new Samsung UN65KS8000 to connect to my sonos system. My sonos system has worked with every other tv I've had. How can I get this to work?

Is it advantageous to send 5.1 audio to the Playbar when it is on its own and not part of a 5.1 system? Does the Playbar process the 5.1 into a virtual surround sound, like it would with a stereo input, or does it output the 3.0 part of the 5.1 with a mix of the rest, or does it only output the 3.0 part of the 5.1?

Can sonos soundbar work with Sony KD - 55X8005C

Has anyone figured out how to disable speakers on a Haier 55" 55E5500U

Hardware registration, Sonos account information, and the Sonos forum are all handled by the same software - Insided. Given that after 2 weeks this software is still incapable of rejecting spam, how secure is our account and registration information? Is it possible that all Sonos speakers could be hacked using Mirai or similar to become part of a botnet used in DDOS attacks?

I've currently got packed up in boxes my new 5.1 system and wondered when I do get moved and unpacked whether I need anything to play my Spotify music through the system? Is it simply a case of linking my phone with the system and playing, or is it a little more complicated than that? Thanks

So... For some reason you can't set the rear speakers (in my case two play 3some paired with the playbar in a 5.1 setup) to duplicate the front L/R signal when watching TV. Frustrating. Its nice to be able to do that so you can keep the vplume relatively low and still hear the voices on shows/movies. Sonos needs to either: Add a toggle to move quickly between surround sound or full stereo, OR allow us to drop more money on speakers and pair them with the soundbar as front L/R signal. For $2300 this is a simple feature that $300 units usually have. Come on guys 😉

I have a Samsung HD tv. Model # UN55D6005SF. My tv does not have the "D" shaped audio output port, only the mini single male optical cable port. I tried a toslink to mini optical cable to connect my tv to my playbar, but it did NOT work. I routed through the cable box, but now that limits me to what I'm watching on cable. Any suggestions on how to get a connection b/t my tv and playbar directly?

Can speaker powered by Connect:Amp be paired with Playbar and SUB to create 5.1 surround sound? I've heard that Play:5 don't work, while Play:3 will. No info out there on integration with Connect:Amp.