What to get

Hi everyone,I am new in this community and i would ask you, that are more expert than me, how to create a system audio, using sonos, for a restaurant that has multiple room and external space.This is the structure:External space (200mq) ----- main hall (150mq) ---- secondary hall (50mq)I was thinking to put a Sonos Move in the external space, in the middle of the space (no cable).Two Sonos ONE SL in the main hall and a sonos one SL in the secondary hall.Between the external speaker and the main hall’s speaker will be more than 30m, same with the one in the secondary hall.I would like to play the same music in all the spaces.The audio source can be in the main hall.Can i group, using my WIFI, all the devices and play the same music? (the source can be a phone or must to be connected to spotify?)In case the WIFI is not working, can i connect the device between them using some chain link system, maybe based on bluetooth or wlan?Thanks 

Do I go with a pair of Play:3 or pair of one sl? Looking for some advice or opinions on which is best when paired with a playbar and sub . Thanks in advance ! 😎

What would you use for an 12 by 18 screened in porch?  I was thinking Era 300.

Hi!I’m currently looking at different options for setting up a sound system for a hostel. It involves installing several speakers to cover a rather large (fully open & connected) common area, including a reception, café and dining hall. Total probably 7 speakers, plus or minus. (either Era 100, One SL, or a combination. Recommendations between these two are also greatly appreciated!). All controlled with an iPad in our reception/café. I’m finding it a bit difficult to figure out just by the information online, so I’m wondering if anyone knows whether or not a Sonus system could satisfy the following example use cases?:) Three specifically selected speakers playing the same music, the rest are silent.  All speakers playing the same music, but with the ability to adjust volume per speaker. Three speakers playing the same music, and a fourth one playing its own music from a different source. (could also be from a different iPad, if that is needed to work as a separate sound source). O

Can someone pls suggest to me 2.1 setup for just music

I’d like to add occasional music capability to a fairly large (450 sq ft) room, 15’ x 30’. It would likely only be occasionally used. Does anyone have any thoughts on a Playbar vs. a pair of Play 3 speakers connected in stereo?(We have a pair of connected Play 5’s in a smaller room that are used daily, the primarily listening space, and a Playbar connected to a television in a medium sized room that’s used for both music and the TV.)Thank you!

I need to add ambient music throughout a 4 floor retail space. All floors are open floorplan and around 2500sqft. Needs to be as simple as possible. I was thinking 4x Sonos Era 100 per floor, one in each corner near the ceiling pointing towards the center, mounted with the Era 100 mount.Each floor will have its own wifi access point. What would be the best option for networking ands controlling all the speaker groups from one Ipad?Thanks!    

Hi all,My house currently have a pair of ceiling speakers above my sitting area across the TV location, so it got me thinking what the best Sonos home theater set up to buy.Arc, Sub and 2x Era 300. This is the latest recommendation from Sonos, but it won’t use the speaker that’s already in place which seems to be a waste, and I wonder if the overhead sound by reflection would be as good as actual ceiling speaker. It also sucks that I can’t add an Amp since it exceeds the maximum number of speaker in a Sonos set up Arc and Sub, then add 1x Amp for ceiling speakers, and install 2x in-wall speaker paired with 1x Amp. Does this provide Atmos rendering? I don’t see in any documentation on whether this is more than what the Sonos system support. Would this be better than Option 1?Thanks for the feedback!

Hello EveryoneI know I broached this subject early on during the initial release of the Era 300 series, so please forgive any redundancy. Let’s begin...IMO, the Five as a single speaker or in stereo pair is better than the Era 300 in the same configurations; but not by much. I was able to do an extensive A/B comparison in the same room with my Five’s and Era 300’s. The Era 300’s have since been moved to another room.My music preference is smooth jazz as I prefer instruments for making comparisons versus having vocals disrupt (color) the mid-range. The music source was SiriusXM Watercolors and Apple Music downloads.Room dimensions19 ft Long 13 ft Wide 8 ft High (slightly textured ceiling and hardwood floors)Speaker Distances and Separation3 ft from front wall (single and stereo pair) 10 ft Listening distance from speaker position (single and stereo pair) 6.5 ft from left and right wall spacing for single speaker  3 ft from left wall and right wall spacing for stereo pair (7 ft separatio

Am considering getting an Arc and surrounds. Wondering about whether the 300s provide a big advantage over the  100’s. Any thoughts?

I recenly purchased the Sonos 2 Amp and the Port. I have a house that is wired with speakers that are driven through a Insignia 200w receiver/amp combo. My goal was to connect my turntable to the amp and connect 2 speakers direclty to the amp to get the best sound quality. I also wanted to be able to stream the music playing on my turntable to my Insignia receiver/amp and have the option of playing the music throughout the house. The rep at my local stereo store recomended that I purchase the Amp, plug the turn table into the amp along with the 2 speakers and then purchase the Port and hook the Ports up to my receiver/amp using the AV ports on boat. I connected everything and have beautiful music playing throu the Amp however I am not able to get the music to stream from the Amp to the Port to the receiver/amp. I am beginning to wonder if this is even a possible scenario. I have both the Port and Amp showing on my Sonos App and I don’t see anything that woulf be in the way except the A

Hello Sonos,I am looking for some advice.Living/living space 11m wide approx 7m deepI have a stereo/surround set that I want to replace. It is a 5.1set, so 2 front, 2 back, 1 middle and a subwoofer. Back+front+Middle speakers same size.I mostly use in stereo mode and can then have the back speakers also play along as so called 5 channel stereo. Surround very occasionally used.Can you advise me what to purchase. I am thinking about:2 x FIVE as front2 x Move as back (already have 1 and then handy to take along)1 x Sub1 x ARCFor stereo modeThen you use the 2xFive+SUB+2xMovesIn home theaterThen you use the SUB+ARC+2xMove as the back.Is this possible?Or is this "to much" Is it easy to switch from stereo set to surround set without going through all the settings each time?Translated with www.DeepL.com/Translator (free version)

Is anyone in the know able to shed some light on this issue for me, as sonos support have been no help. I have an eligible product in my sonos system , that has meant I am eligible for the 30% discount under the upgrade programme. I was testing out my basket to see which items I could apply the discount to. On first attempt the discount from the upgrade programme seemed to auto apply. However I then emptied my cart. Since then the discount is not auto applying and I cannot see a discount code on my upgrade page. Even though it says the product is eligible and the discount is activated.Has anyone else experienced this issue please? Sonos support have been no help and just keep telling me they don’t know why it isn’t auto applying. Thanks is advance.

Hi,Purchased my sound system ~1 mo ago: Arc + 2 x Sonos One 2nd gen surrounds.Well of course they announced the Era 300.  Ok, no matter I’ll get a 30% discount.Hmm 15%, okBut actually I’m not seeing any upgrade discount for Sonos One G2.  (I do see for G1)..Jean

I Like to buy a Beam gen 1. But can I connect my One & One SL, and if so can I use them both as home cinema system as in just listening to my music?  Im sort of on budget, that’s why I’m thinking bout buying a refurbished Beam but it’s a gen 1.  Or would it be better to just buy a new Ray. (My apartment is only 50m2).  Hope someone can advice me.Thank you 

Hi - thank you in advance for your help.  New to this so really looking for the expertise of the group.  We are adding a kitchen addition and covered outdoor deck to our home.  The electrician suggested 2 Sonos ceiling speakers for each area. He also suggested 2 Sonos receivers (I’m guessing he is referring to the amplifiers?). My questions:does this equipment sound correct?  Why would we need 2 receivers? if we purchased just 1 receiver and 4 ceiling speakers, do we have the option of turning the deck ones off if we are not out there? Can we listen to 2 different sources in the 2 different areas at the same time (parents mysic on kitchen, kids music on deck?) can we add additional stand alone Sonos speakers in the future for the living room for example or out in the yard?thank you very much!  Very excited about this 

Hi, which of these is better for just music?Sub mini + Beam Gen2 + 2x Era 100 as surround rear speakers. Sub mini + Beam Gen2 + 2x Era 300 as surround rear speakers. 2x Era 300 as stereo pair. 2x Era 100 as stereo pair.At the moment I am using number one from the above list and I am happy with the spatial audio but wondering if option 3 would be as good or better or the same?Also have read that some say 2x Era 100 as a stereo pair is pretty good, but without the spatial audio effect of course.

I am setting up audio in my office mostly listen to Jazz in that space, it is a small room 120 sq feet. For about the same price I can put 2 era 300’s or 2 100’s with a submini. I was thinking the 100’s with the submini would free the 100’s to do what they do best and the submini will fill bottom end? I dont really like the way spatial audio sounds on a lot of tracks so that is less of a concern for me. Thoughts? 

I currently have an arc,gen3 sub,and play 1’s as surrounds. I plan to move the play1’s to the bedroom for music and I had planned to buy the era 300 for surround replacement. After hearing that the front driver is not working when in surround mode I am thinking of bypassing on those speakers. Now I am thinking about the era 100 for surround speakers. I listen to music around 20% of the time with my current setup and it sounds good but with the 300’s I am reading that music doesn’t sound good unless you’re listening to atmos music. So I was thinking that if it doesn’t sound that good with regular stereo music then it might not sound good for movies that aren’t Dolby Atmos. In fact with non Dolby atmos movies two of the drivers wouldn’t be working (front and upfiring)? That’s why I was thinking I should buy a pair of era 100’s for surrounds. All the drivers would be activated 100% of the time. I realize I wouldn’t be enveloped in a spatial sound bubble when playing Dolby atmos material b

Having researched easy to use setups for my technology challenged parents, I think the Sonos “Immersive Set with Beam” (includes Beam Gen2, Sub Mini, Era 100 x2) might be the best solution for both watching TV & listening to music.  However, I don’t have personal experience with Sonos components, so appreciate any help or insights you might share.I’m assuming setting up / configuring the audio for TV watching will be very simple using the Sonos app (I’ll do this for them).  But I’m unsure about whether the configuration should (or can) change for listening to music (ie disabling the sound bar).  Again, given that my parents are not tech savvy, any configuration / mode change (TV <-> Music) would need to be extremely simple…preferably using universal remote instead of Sonos app.CONFIGURATION (planned, haven’t purchased yet):Television HDMI Arc or eArc to power on/off and volume control the speakers. Prefer to avoid using A/V receiver, instead using TV’s HDMI Arc functionality.

I am getting an Audio-Technica turntable as a gift and could use some guidance on how best to connect it to my current Sonos speakers. It will be this model, AT-LP3XBT which has line out capabilities.I currently own two Play:1 speakers. I gather I could buy a Port (or I guess a not-ancient Connect?) for the turntable to connect it to my Plays, but could I alternatively just get an Era 100 and use that to beef up my sound and also broadcast to the Plays? Or are the Plays so old that they need the Port no matter what to get connected?I won’t have any passive non-Sonos speakers in the mix so...it’s not much to work with otherwise. Thank you!  

I have like 500 CD’s some of which can’t be found on any streaming services… I would like to download them to ??? and to play them with my sonos system… how can I do this? What is the best software and best way to do this…. I am an apple device user at the moment…. but if a windows computer is better for this please let me know….any help would be appreciated… it doesn’t seem to work well with Apple Music software because the cd’s I’m referring to aren’t being streamed… thanksi

Hi last year I bought the surround sound set for my living room and I now want to be able to play vinyl, I know I need the turntable but do I need the PORT or the amp ? 

Has anyone compared the new Era 100 with the Amazon Studio?

For home theatre surround sound. I currently have the arc and 2 subs…. i just bought the sub today on my way to work, i have yet to install it… i have an open layout… living room and kitchen is all open space, pretty big space… ill put up pictures later so u can have a better idea… im having trouble on where to place the 2 back speakers though, i dont want stands and my only option i feel is towards the back walls that face the tv… my concern is that they might be too far back and i wont achieve the proper sound.Idk if i should get the fives or the 300s though.... i asked the employee at best buy and he didnt hesitate to say the 5s… when i researched ive seen mostly pictures of people having the 300s in their recent purchases for surround sound, so now im conflicted. What do u guys recommend?