Talk Sonos Products

If I play music through Spotify on my TV, it sounds amazing, the sound is balanced pretty well between each speaker and the sub sounds great. But if I pick up my phone and start playing the same songs through the Sonos app, the quality is absolute garbage, it sounds completely drowned out, not nearly as loud despite the volume being the same and the surrounds are horrible, basically just playing the song as if they were unpaired, completely ruining the soundstage if you’re not sitting in the very center of the room.

Good day, i have searched through the history and am still unclear of what my best option is.  Apologies if I’ve missed it. Currently i have the Sonance MAG 6.1 set up for my back yard.  This system has a sub and six landscape speakers running to a single Sonos amp. Sounds great. My patio has a TV that i would like to integrate and be able to both play the TV output just on my patio (separate from the landscape speakers), as well as with my landscape speaker or just through my landscape speakers. I have yet to purchase the audio (speakers/amp) for my TV patio, would in ceiling with a sperate Sonos amp or sound bar (beam/arc) enable the above desired end state?  Would i need something different? Appreciate any intelligence you can provide.  Thank you.

Amp audio for projector.   Posting because of frustrating customer service call.  To hook up you may use the rca in from the phone/computer/dvr to 3.5mm headphone jack and video hdmi to the projector.  So 2 connections, one to headphone jack and other for video to projector. Alternate is use hdmi ARC to projector and if it has output, then go to rca in on the AMP.  there, fixed until the software engineers ger their butts in gear and patch the wireless option in, why, because its a wireless system!

When my Play:1 switched to a loud, obnoxious song I wanted to skip, I was not able to do it because my iPad’s S1 app insisted I input my Sonos password to confirm I wanted to continue to use S1, else it would “upgrade” me to S2.  I picked up my Android phone and got the same message.  I climbed up on a chair to reach the play/pause button on my speaker, then relaxed enough to look up the Sonos password, which I had not used in many months, and was able to preserve my S1 system.  I am very disappointed in the Sonos effort to blackmail users into switching to the inferior S2 software.  Whenever I look up the S2 app on the Play or Apple stores, the first several pages of reviews are always the same - it does not work, the app constantly loses the speakers and the users have to spend time troubleshooting, with no useful help from Sonos, instead of listening to music.  For those of us who are happy with our S1 systems, why can’t you just leave us alone and let us use

I have a turntable plugged into my Sony stereo amplifier and I wish to plug this into my Sonos port, thus essentially using the amp as a pre amp. Will the RCA output on the back of the amp work for this? I assume I just run an RCA cable from the amp output to the port input and then this will stream to all my Sonos speakers? The Sony amp is the Sony STRDH190.CEK.

Before Rogan went to Spotify I could stream his podcast through Stitcher. Now, Stitcher doesn’t work at all and even though I can stream Rogan directly through Spotify, his podcast doesn’t show up when I search for it in Spotify on Sonos. Is it not licensed for Canada, for Sonos? Thx.

I got a gen 3 sub recently and have tried to keep it in pristine condition. All I've used on it is the Sonos cloth that comes with it to dust it off. I was shining my phones flashlight last time I cleaned it to make sure I had removed everything, when I noticed a hairline scratch that was about 5 inches long on the top of the sub. This scratch is really only visible when I shine a flashlight near it although I'm wondering if this is common and the finish scratches from just cleaning it with the supplied cloth.Has anyone tried to get rid of scratches like these on the sub with a polish, or should I just leave it as is?

What’s the chance sonos will build a larger subwoofer with deeper extension? I know I can get the Sonia amp and use my own sub but I am so impressed with Sonos fit and finish of current products. I would be willing to shell out good money for a larger sub.

Hello out there,I have an sonos beam with two play1 and sub for about a year now. I just noticed recently that system is not playing in  dolby 5.1, but instead in pcm,/ surround.My tv is a vizio 652ui-b2 and my cable/satellite service is direct tv. I looked at my audio tv settings and it was set on PCM. So I switched it to bitstream. And my sonos beam started playing in dolby. So I thought I fixed the problem.But when I tried to use my remote the sound cut off.  I then switched the tv back to PCM, and everything worked ok. But I'm not getting dolby sound from my sonos.This kind of defeats the purpose of having a sonos system.If anyone out there had this issue?  let me know please thanks 

Hi!I’m looking for advice on how to play CDs through my Sonos speakers without spending a fortune on a Sonos Port or Amp. I currently have a Sonos One Gen 2 and an IKEA Symfonisk, none of which have line-in. I’ve also ordered the Sonos Roam, which also doesn’t have line-in, but apparently has bluetooth. So, could I:Get a portable CD player with bluetooth and connect that to the Sonos Roam via bluetooth? Would that only play on the Roam then and not the whole system? If I get an Apple Optical Drive, could I then connect it to my Macbook and send it to the speakers via Airplay 2?Any other options?Grateful for any advice! 

Hello!I am considering a Sonos One SL to replace my Hitachi W200. One thing I am confused about is, if i am playing music from Apple Music to the Sonos, will it only play the music and not other things on my phone? For example, I can play Spotify to the W200 and if I play a Youtube video, or a game that has sound, those other sounds do not play on the W200 (which is the way I want it). The Hitachi has great sound but will not work with Apple Music over WiFi, I would have to switch to BT which would play the sounds I do not want. Will the Sonos work like the W200 does in WiFi?  

We have been building some higher end homes and find the clients want larger and larger TV’s but when mounting these TV’s over a fire place, book shelf or other obstacle it leaves very little room for a sound bar. Has anybody else thought of taking a sound bar and having it come apart in two pieces that could be mounted on each side of the TV vertically or horizontally, this would provide room for the TV to be  mounted lower giving a better viewing angle yet keeping the center audio projection at the TV.

Greetings!   My system includes:1 x Connect (ZP90) (connected to LAN via ethernet)2 x Connect:Amp (ZP120)  All running S1 with the latest firmware and software.   I want to play audio (for example, YouTube video) from a iOS device to a Sonos unit over Wi-Fi.  Is this possible?Thank you.

I've read several posts about the Play 5_2nd Gen suddenly having problems due to a defective WiFi card. Although it appears that Sonos has been replacing the defective units (when notified) it still gives me pause. Do I need to be concerned about my two (2) out of warranty Play 5 2nd Gen's developing the same issue? If it is widespread I would hope that Sonos would issue a re-call to replace the units similar to what Microsoft did with the 1st Gen Xbox One units manufactured in a certain lot. Can anyone at Sonos elaborate?

I recently installed an iPad wall mount for controlling my Sonos system and smart home devices. In order to easily control both Sonos & Apple Home without switching screens, I’ve setup the two apps in split screen mode: This works really nicely, however, every time the Sonos app runs an update, the layout of the now playing view on the Sonos app gets squished to look like this (red border added): In order to fix it I have to remove the app from split screen mode and then re-add it. A minor annoyance, but I’m finding this is happening about once a week, and the idea with this wall mount is that I don’t have to fuss with anything and “it just works”. So I’m posting here ho

Hello everybody,I have a SONOS home theater system consisting of a SONOS BEAM soundbar and two SONOS ONE speakers and everything works perfectly.I have now purchased a SONOS FIVE and would like to add it to the same room as my home theater system.The problem is that when I reproduce the same sound source in the home cinema (BEAM + 2 ONE) and the FIVE produces an echo or latency between the home cinema and the FIVE very unpleasant, is it possible to correct this?Thanks.

HiI have a Beam with 2 Sonos One in my living room. When I use my TV as the sound source most of the sound comes from the Beam and there is low volume from the Sonos Ones. I do not get the true surround sound. When I use my Macbook Pro as the sound source then I get a true surround sound experience. I can play the same TV program from my MBP and then from my TV and I can hear a definite difference in the sound quality as I switch from one source to the other. I have tried all the audio settings I can find on the TV and YouView boxand have not been able to improve the sound. Can anyone help ? My set up is:Panasonic TV TX-L37G10BBT Youview+ Freeview set top boxBeam is fed from Optical out from TV 

Can you use Amp to connect dual subs to just a stereo pair of Fives without the normally required soundbar as the hub?

I just upgraded my controller to 12.2.2 (OS S2) and the iPhone app is now super slow, and sometimes freezes, any ideas or fixes out there?App tells me it’s also 12.2.2.I have done all the usual, reboots, resets etc - no changes. Other iPhones are also slow, also does not mater what source i am trying to play !!any ideas? And Happy New Year !!!!  

I have a turntable and intend to retire my whole stereo sound systems, replacing it with my recently bought Sonos ARC which is connected to my TV now. However, I have a turntable which I am not sure if I can connect to ARC. I assume I need some equipment to connect to the TV and out to Sonos ARC but it would mean I need to have my TV on when I use the turntable ? I was looking at AMP and I suspect it is not the system to do it, as it connect to existing speakers not to ARC. Any advice out there ?  

I am trying to install a Sonos Arc right above my motorized projector screen. Please see digram. There is a hanging decorative box in the middle of my middle room which is ideal to install an in-ceiling flushed motorized projector screen,  ~16 feet throw distance to the projector.  This room also has vaulted ceiling.  I am planning on using HDFury Arcana to split the 4K+Atmos from Apple TV 4k and send audio to Sonos Arc and 4k Video to projector. Since there is nothing in the middle of the room (no walls) to install the sound bar, the only place I can think of is above the screen , right at the edge (see digram).  Atmos requires upward angled speakers to drive sound with an angle to the ceiling so they can reflect back to the listening position and create the feeling of fully emerged sound. In order to get the front facing speakers in Arc to point to the sitting position, I have to tilt down the arc about 28 degrees. This means the already angled s

By now everyone has heard about the HDfury Arcana: eARC Adapter that is now available for pre-order.  It’s touted to relieve lip-sync issues associated with the Sonos Arc among other things. Read about the proposed benefits of the HDfury Arcana: eArc Adapter here. This information is not intended to deter anyone from ordering the Arcana (I’m contemplating ordering it for testing).  However, my expectations are not that it will be a “cure-all” for every situation regarding Sonos. Below are two things regarding the HDfury Arcana: eARC Adapter you should know: The Arcana may negate Alexa/Google voice assistance between your TV and the Arc (as well as the Beam). Things such as on/off, volume and input swit

Hijust set up my new Arc with my Sony A1 oled tv  I have done plenty reading here about atmos/arc/earc etc  sony a1 does not have eArc which I knew !but maybe I read too much here  about this so maybe someone can clear something up for me ! set was easy and  arc sounds beautiful …now I have upgraded from a pretty old home cinema so any upgrade would be better ..doh !! anyway while playing a a good example of Dolby 5.1  I tried “6 underground” on Netflix, I seen that this was in Dolby atmos …so expected it to play in Dolby 5.1 while playing through the Sonos app the sound says on the app Dolby atmos !!if I do not  have an eArc on Sony a1 should this not say Dolby 5.1 Iam  sure i read here that the app will play/decode only what it receives from tv    

I received my ARC today and my immediate impression is that it is a major step backward from the sound quality of the BEAM.  Anyone swapped out the BEAM for an ARC and achieve positive results?  Same iPhone 12 phone used for Trulpay tuning of both setups.  Anyone regretted not returning their ARC within the 45 day window?   I really want to love this thing but it doesn’t sound as good as it’s little brother IMO. 

when will my roam arrive