Show off your setup or get inspired by others
Recently active
The room plays such an important part in the sound. Could Sonos please enable the Trueplay feature or provide a more sophisticated equaliser/dsp on the Sonos Port and Amp? Sonos Port and Amp are priced as Sonos premium products and don’t have this feature yet their cheaper products like the One do.Other companies like Marantz, Lyngdorf, NAD offer room correction for their amps without knowing the speakers so this can’t be the reason for not including it. If Sonos added such a feature to their Port and Amp it would give them a significant competitive advantage compared to more similar priced products. Thanks.
Hello, all. I’m brand new to Sonos and have been doing research on upgrading/updating my current 5.1 home theater setup (LG OLED55B7P TV, Yamaha receiver, center, front surrounds mounted to wall, in-ceiling rear surrounds, JBL subwoofer). My goal was to see if I can eliminate the Yamaha receiver (I no longer have any other components connected to it), and also eliminate the center and two front surround speakers … but continue to use the rear surround in-ceiling speakers and my existing subwoofer.I thought that Sonos Arc (for center + fronts) and Sonos Amp (for rears and sub) would get me there … but it sounds like I will NOT be able to use my existing JBL subwoofer in this configuration, is that correct? Because (if my understanding is correct) the Amp will disable the subwoofer connection when the speakers that are connected to the Amp are used as surrounds?If that is the case … then, damn!! So close. I won’t be pulling the trigger on Sonos. Are there any other options that would
In a 30 minute video Peter Pee over on YouTube compared the iPhone 6,7,11, SE2, 12Pro & 12Mini in a somewhat standardized Trueplay method. The frequency response results are all very different, offering a different sound depending on the device used.I am wondering if some of the newer dialog issues reported by Arc owners could be linked to the device they used during Trueplay. Some users here have reported that turning Trueplay off gives them back some midrange, vocals or brings the Arc back to life. This video could show why that is for some.TL;DR the iPhone SE2 & 12 Mini offer the most desirable Trueplay results. The disappointing 12pro results are shown the 22:00 mark. by showing the frequency response from the Arc by itself, no sub, no surrounds. Before in the grey line, blue being the 12Pro.What device are you using? Let me know how the tuning works out for you. I added this to home theater as this involves the Sonos Arc. Links are in bold. Is iPhone 12 the best Truepla
Apparently my One SL updated to S2 last night, even though I have auto-updates turned off (as I wanted to avoid this happening). I called Sonos support, who informed me, after much troubleshooting including a diagnostic report, etc., that the update was forced through to all SL units. Resetting my unit didn’t help, as this is apparently irreversible even though I didn’t initiate it.As someone who currently relies on a mixed system of old and new speakers using the S1 app, this seems like a really bad customer experience. I was basically told “yes, we did this. No it can’t be reversed. You have to use two apps now”. At least if there had been some notice of this change I wouldn’t have wasted hours troubleshooting and calling support.Anyone else have this happen to their One SL?I’ve been using Sonos heavily for 10+ years and have mostly enjoyed and recommended it often. In fact, I had just ordered a Move and was going to add a few other units (just moved to a bigger place), but am a bit
Hello AllI have two connect amp with sonos ceiling speakers. Both working on S1 app, I can group them and all. Now thinking of adding speakers to the hallway and living room. i was thinking of getting Play 5 - Gen 2. I was wondering if i can group them all together to play the same music in all of them. or I better be looking at Play 5 Gen 1 speakers?
So it’s a rather new model TV and I just can’t get anything other than stereo I’m using a Sonos Arc, Sonos Amp connected to Sonos ceiling speakers and a Sonos SubI have the TV setting as per the following(Don’t worry about the wires, it’s not finished!)Tried Netflix and SkyTried turning the TV on and off at the mainsTried a full factory reset of the TV
I need a longer power cable for my Arc. I’d say 5 meters should do it. Can I use a generic non-polarized IEC C8 cable?
I’m downsizing from a house into an apartment and trying to adopt a neighborly spirit while compromising my movie-watching experience as little as possible - “but wait, the topic says ‘dual subs’?”I want to use a Sonos amp to drive a pair of bass transducers to get the shake of heavy bass while having my gen 3 sub turned down low-ish to be a good neighbor. Is it possible to have a mixed pair of dual subs in the Sonos app without killing surround sound? I’ve seen workarounds that involve creating a second room to group but my understanding is that that would negatively impact surround sound/Atmos.
I’ve been banging around sonos site for awhile trying to figure this out.I understand Sonos AMP is 2 channel.I understand that if you want 2 Front, 2 Rear, you get 2 AMPs.What I don’t understand is:How do 2 AMPs act as one zone together? what about the center channel? (if you don't want a sonos soundbar) does it actually do true 5.1? or does it treat each set of speakers as stereo How do you handle the multi-sources? I have Apple TV and Nintendo Switch for example. Does Sonos AMP have Airplay2 directly? So it appears as a speaker to broadcast to in IOS devices? If so, what happens when you have more than 1AMP meant to power one zone?Any help would be appreciated! I like the idea of migrating to Sonos over time, just can’t figure out this first step of gear I need.
Wondering if I I have a Firestick 4K connected to TV with Sonos Arc, could I play music on the Echo/Alexa everywhere group? Thus using Sonos sound bar like an echo device for multi room music.
After power outage no sound out of wired home speakers even though app shows it is playing. Sound works through wireless sonos speakers and alexa speakers.
Hello and thanks in advance. I’m reconfiguring my room but i have some questions. I have an existing in ceiling rear speakers. My plan is to have a new tv and Sonos Arc and sub. I have wired rears going to a different location than the Arc and Sub but everything will be connected to the same WiFi. So my questions are: can the AMP be set up to act as rear surrounds? will the AMP connect over WiFi to the ARC (which is connect directly to the tv and wirelessly to the same WiFi network) - or do they need to be hardwired together somehow? the Sub wirelessly connects correct? any suggestion / help would be appreciated
Dear Sonos, I love my 5.1 setup, arc, sub and 2 one sl, but there is one key thing I don’t really like at all. That’s the arc music quality. In comparison the ones sound ALOT better. I would absolutely love to be able to turn off the arc when listening to music so it’s just from the ones and sub. Could u please make this option available. I know I can set ones volume up but that’s not good nor will it match with the sub (right?). Many thanks for anyone who can help me get this request to the employees/developers.
Hi there - does anybody know how the 12V trigger logic works on the Port i.e. once it outputs audio trigger on - when no audio trigger off - any delays etc.Kind regards, Emil
Opened my Sonos app in my garden room started playing music and was confronted with a boomy mess. Sounded like Trueplay had been turned off.Turns out Trueplay is not only off but shows as if it had never been set up. So I tuned the room again. That worked but it will not show the option to turn Trueplay on or off. Rebooted all the speakers, tried again but although the tuning completes it does not show in the room.diagnostic 1231198605Excuse the title typo, courtesy of Apple autocorrect
I have been trying to get an official response from SONOS on their continued use of SMB1 which will be removed from various vendors products. I have been using SONOS since it was introduced with various SYNOLOGY NAS and Windows based computers to store my ripped music. When SYNOLOGY releases DSM V7 they have indicated that SMB1 will be removed and Microsoft Windows has deprecated the protocol. I will NOT purchase another SONOS product until they provide an official answer on their plans to continue to support streaming music from a NAS that does NOT require the SMB1 protocol.
I recently purchased an ARC Soundbar to replace my Sonos Soundbar in my main family room. I plan on using the old Soundbar in my bedroom as my TV sound is horrible. I would like to place it where my cable box is currently located (see picture). Any issues with that placement? thank you for your feedback!
By using the magnetic mounting plate, battery life gets reduced for below 24h hours! Simply not using the magnetic plates, battery life comes back to normal… learned this from another community platform and couldnt belive that its true!
Hi all, I’ve set up and tuned a pair of Sonos One speakers as Surround for our existing (working) Playbar/Sub. During the tune process, I heard great sound from the surround pair of Ones. Once I began to watch TV, ther was no sound from the Ones (surround) but normal sound from the Playbar and Sub. Anyone know what to do next?
Hello: I’ve created a number of playlists with various songs from all genres downloaded on my desktop computer. However when I listen to and play back the playlist using my Play1 speaker, many of the songs, because they were recorded at different volume levels, don’t play at the same volume level. Some songs play back louder than others and as a result I am continuously having to increase or decrease the volume on the Play1 speaker, depending on the song.Is there a way to set the volume on the Sonos app or Play1 speaker so that the songs on the playlists play back at equal or the same volume levels?Apreciate any help or insight.Thanks.
I know, another thread started with this topic. BUT…This is a LARGE installation, over 15 Sonos devices, in a very large home installation.On a Unifi Managed network. I know EXACTLY the status of the six WiFI APs that are finely tuned for exact coverage in a intentionally designed network.I can SEE the Sonos devices on the network.I can see 82-99% signal strength of the sonos devices that the controller (and app) can’t see. The Sonos devices fall out of the Sonos network, yet remain on the WiFi network uninterrupted. The EdgeRouter maintains the IP addresses of the missing Sonos units. The MANAGED network works flawlessly for 75+ other devices on it, and SONOS is the only devices that ever have a problem.This forum is full of advice that basically says turn off all the Sonos devices and reboot your network router. This is a ridiculous solution to advise customers to do constantly to resolve issues with your equipment. And for those of us with large Sonos systems, and, as crazy as
I have a Sonos Arc with 5.1 in my living room. I also have one Play:1 in the bedroom and one Play:1 in the bathroom. I like to have them all grouped when watching TV. The only thing what is a bit annoying is that when I change the volume with the TV remote only the Arc gets louder/softer. The other grouped speakers don't change. It happens all to often that I decrease the volume on the TV and the sound comes from bedroom and bathroom what is not what I want and it sounds strange. Is there a possibility to synchronise the volume changes for the entire group when using the TV remote? I know it works when using the app.
HiJust noticed a very strange problem in the Sonos app. I have albums by the group FireHouse (note the capital H in the middle). I also have albums by the group HammerFall (note the capital F in the middle).In both cases the correct case artist names are stored in both the Artist and AlbumArtist tags in the FLAC tracks.In the screenshot below you can see that for some reason FireHouse is displaying as Firehouse (with no capital H) in the artist list and also the track queue, but is showing correctly in the Now Playing screen!! I have tried removing my music library and setting it up from scratch and re-indexing and I get the same resultYou can see from the screenshot below for HammerFall that the artist name is displaying correctly in all 3 parts of the screenThis is same issue in the PC app and iPhone and iPad appsAny idea what is causing this?ThanksG
I just bought a Sonos Arc, Symfonisk Lamp and Symfonisk Wall Art speaker. I will add a sub soon. Does anyone know if I can use the Lamp and Wall Art as my L and R surround sound speakers? I have the Arc and Wall Art and the Lamp is supposed to be delivered in a couple days
I’m not sure if this is the right place. But, when I turn on the power to my PS5, it turn on as well as the apple TV. Same if I turn just the apple TV on. It will turn on my PS5 as well.Did I connect something wrong from the sonos arc speaker?
Already have an account? Login
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.