Show off your setup or get inspired by others
Recently active
How many max Symphonisk can I pair at once. Can I pair 10 of them together ?
Both of my ONE Gen2 Sonos speakers suddenly stopped working and will not power on. Have tried different outlets, etc. I just got them In May 2021. Is this common lifespan for Sonos speakers??
Hi,Hope someone can help please.I currently have in a living room the wiring for 5 channel speakers but have removed the home cinema setup to another room.I have an Arcam A32 and Tannoy Signature DC6 using the front stereo speaker wiring fed by a Sonos Connect (gen 1).I'm in process of upgrading to gen 2 and was thinking Sonos Port. However I was then thinking I could maybe get an Amp instead be able to use it for TV (hdmi) as well. In this scenario:-- Could the Amp use the A32 for the fronts (RCA)?- Could the Amp then power passive rear speakers using its own amps or I'd have to use Sonos wireless speakers?- What comes out of the digital out on the Amp in this case? Is it the full 5.1?- What would happen if I played music in such a setup? Does the Amp create a surround effect from the stereo or just play to the front speakers? Or maybe can be configured to do either?Please if anyone has experience/ knowledge of Amp and can answer these would be much appreciated.Thanks, Ian.
When will the Sonos controller for MacOS be updated to run natively on Apple Silicon?
I know about Spotify, Amazon and Pandora, are there any others that support ratings in the Sonos app?
Hey everyone,I saw this was partially covered on a previous thread, but since that was a couple of months ago I started a new one.Received my Era 300 about an hour ago today, and the back is not uniform at all, with a much bigger gap on the back plate on the top right hand side.This is very noticeable too, and whilst I appreciate this is not a new issue I am a little surprised it is still happening nearly 2 months after it was first reported.Called support and whilst on the phone to them I also noticed the grill at the top right has a similar gap, which you can push in, only to come back out a few minutes later.Support reassured me the next one should be good, but really, how can they promise this? Do they have a “good” batch and a “bad” batch?Lugging this box all the way to the pick up point tomorrow and hoping for the best.A bit of a fiasco, especially when I will be away soon and likely to take ages swapping the speakers but there you go.Whilst we are at it, any news on the front dr
Hi allI think I know the answer, but want to to tap the collective community brains for confirmation.7 years ago we set up a media wall for the TV and sonos Playbar paired qwith 2 Sonos play1’s as rear surrounds. The TV and playbar are in a recessed wall unit. The depth of the recess is 14cm. The playbar is 10cm from the top of the recess, 10cm above the 55 inch TV. The width of the recess is 1450mm (as per the attached pics)We needed this set up to ensure the TV was not too high and up unitl now, we’ve had no issues. We are upgrading the TV and looking at upgrading the soundbar to take advantage of Dolby Atmos.Looking at the size and design of the Arc, it seems like it would be too close to the top and sides of the recess to be optimal. I think it would still be 10cm from top and 15cm each side.So my question is, would we be compromising the benefits of the arc? Would the sound from the side and upwards firing speakers would get distorted. In which case are we better sticking t
I have an arc bar. I would like to buy two speakers. I'm hesitating between fives and era300s. I use 50% music in stereo and 50% in home cinema.What do you recommend ?
Has anyone used something like this successfully to reduce audio delay? Right now I have a traditional mixer board and have tried several solutions but the RCA input delay/lag is quite annoying! Here is the HDMI mixer I found…https://www.soundtown.com/collections/microphone_systems/products/swm16-max I was thinking one of these setups below might work to reduce audio delay? Option 1Apple TV => Mixer => HDMI1 on TVThen use HDMI ARC output on TV => Sonos Amp Option 2Apple TV => HDMI1 on TV => Mixer via HDMI ARC Then Mixer => Sonos AMP via Optical&HDMI adapter For reference I currently have a Samsung Frame TV (if it matters)… What I don’t know is if option 1 will work since I'm not sure if the mixer is capable of arc passthrough? and then for option 2 I wasn’t sure if this would solve any of the delay issues I have or would it be the same problem with audio delays? I’ve done a bunch of searching on forums + reddit/etc but haven’t seen much new stuff on this topic… Th
Is there a way for the sonos engineers to allow trueplay for the era 300 when used as rears for home theater setup? I have android and would need an iPhone to do trueplay for everything. I could borrow an iPhone to do this but sometimes I need to reset these devices for it to work correctly and I would need to do the trueplay all over again.
Can I combine the Beam Sound Bar with two One speakers for surround sound
I asked this question over in the sonos reddit forum and others are having same issues so thought I would bring over here.What are people using for their usb charger for the Sonos move? I attempted to use my MacBook pros charger but it didn’t work. I have the 60watt brick but from what I read it should be able to still work.So then I read it might be the cord as they have chips in them and knowing Apple they locked their cord down. So I bought an anker power line 3.1 usb c cable and tried it with the MacBook brick again and it still didn’t work.So before I keep buying and returning curious if anyone has had success with certain chargers with the move. Thanks!
Can I connect Sonos Play:3 Speakers to my laptop?
Hi guys, A year ago when I moved, I fulfilled myself a long-held dream and got a Sonos multiroom sound system that I am really happy with. Also, this flat has a smart home system that, using KNX, operates everything from heating and light to sun blinds. To control it I can use wall switches or a very simple app. Since I have Sonos microphones in every room, I asked a technician if it’s possible to somehow make use of those mics to control the KNX smart home via voice commands using my Sonos speakers. He was under the impression that the “RealKNX Air Server” would achieve this, however I was informed they are only able to control Sonos speakers for sound output, not the other way around as voice command input for the smart home system (which is ironic since Sonos bought RealKNX in 2019 and now feature their offline voice assistant Snips as “Sonos Voice Control”). This means that with a RealKNX Air server (in combination with their gateway config called “ProServ”) I would need additional
Hi everyoneI have a complete Sonos surround sound system set up but I would like to get a pair of floor stands for my One speakers, which are currently sitting on a table and a bookshelf at two different corners of the room.I’ve been searching online as to which ones to buy and I can see Sonos sell two types. The Sanus floor stands at £99 and then the more expensive One stands at £249, which is quite a jump from the cheaper stands. Then there are even cheaper imitations on various sites, which I don’t think I want to buy.So really my questions is, out of the two official Sonos stands, which one should I buy? Are the more expensive stands really worth the £249 and what makes them stand out (no pun intended 😂) to the Sanus version? If you own a pair of these, which one did you buy and are you pleased with them? Many thanks
I’m having all sorts of connectivity and grouping issues on large varied Sonos system ONLY with Apple Music. Other music services work fine. What’s up? Looks like Sonos not purging previously played Apple Music so occasionally receive error, “system in use elsewhere”. Usually it just plays Apple Music on certain, but not all, grouped speakers.
I just built a new house and my room is 15 feet across and 30 feet in length, with a 9 foot ceiling. What is the ideal distance to place a pair of Era 300's behind a couch for the ultimate surround sound experience. I will have a 77 inch flat screen mounted to the wall on one end of the room with an Arc soundar under the screen. My couch will be placed 10 feet in front of the TV wall, and I will have a Third Gen sub woofer in the front right corner of the room? I have 20 feet to work with behind me, and I’m wondering what the ideal distance would be for placing the two Era 300’s?I have come across a lot of posts from people who have the back of their couches pressed against a wall, but I haven’t come across anything addressing the kind of space I am working with for rear speakers, and more specifically, a pair of Era 300’s as rear speakers. I would love some advice, as I have a lot of flexibility. I will be using Sonos speaker stands, unless someone convinces me to go with wall mounts,
Hi, losing the will with the reliability of my sonos system. I run a split system with newer s2 compatible products and then 2 old Gen 1 play 5s on the s1 as a separate network. All was well till about a month ago when the play 5s just stopped working. I have tried everything rebooting, restarting routers, running it wired and unwired. When I do a complete restart, delete and reboot the app, reset the speaker and do a new set up, the app recognises the speaker and the network initially, it creates the Sonos wifi network temporarily but when you then need to select the wifi network again that’s where it stops. I have a split band 2.4 and 5ghz router and am selecting the 2.4 as I know Gen 1 is incompatible with 5 ghz. As I work long hours attempting to call Sonos with their opening hours (no eves and weekends) is difficult. Please help??!
Hi Sony managed finally to convert it's tempest 3d audio sound to the most used current format dolby atmos. Did you experience it? Do you think it's a great atmos experience?I am using an arc with a sub and two symfonisk bookshelfs. I tested it with the game A plague tale requiem. I definitely could hear sound coming from the roof and generally a more spatial sound. Its more difficult to notice where the sound is exactly coming from and the overall experience is much more immersiveI am curious to know your feedback
Daar Sonos user, Please try to explain, in simple manner, how to use Sonos S1 system and Sonos S2 system, at the same time, for different speakers, in one house Thanks, Bertus
Can I use ray with a play 3?
A few times our internet has gone down. We use sonosnet between five speakers - one wired via Ethernet and the other speakers daisy chained. is there a way to setup a backup internet with a hotspot through my cell phone? I’d need to easily toggle between the hotspot and our Ethernet using sonosnet (when the internet starts working again). my preference is the Ethernet but the hotspot usage would be a backup.
Hello All,I have an Arc/One SL/Sub surround sound in my living room, a One SL in the dining room, and a Move in the kitchen to cover my main floor. When I try to group the speakers on that floor with the surround sound being the source (connected to a Vizio TV with the actual source being an Apple TV), the dining room plays fine, but the Move in the kitchen is glitchy if it plays at all. It does get better if i change the delay on the surround, but then the dining room, which was playing fine before, is obviously out of sync with the living room, and I can’t just blast the music if the delay is increased. I did some reading in the forum and it sounds like the Move just isn’t built to handle grouping well. I was wondering if there was any improvement with the Move 2? I like the Move in the kitchen because I can grab it and take it to the deck outside the kitchen, but I’m still limited to starting music directly to it. Anybody know if grouping is better on a Move 2?
Tomorrow my Sonos Amp will reach me so I was wondering what you guys think about the following setup and what I might be able to optimize..Lg oled TV hdmi Arc ( not e-arc)Hdmi goes to ArcSonos Amp 1.5mm audio cable 2 meters and 5 meters.2x B&W 704 Nautilus speakers (had to bridge low and high frequencies by wire (black to black, red to red) as the plates are missing) so speakers are expecting regular audio connection.Fancy Banana plugs with gold in it or something.Will connect directly to Sonos Amp as front speakers.On the other side of the room 1x Sonos One and 1x Sonos One SL for surround. I need the B&W's for superb classical music (mostly pure piano) and I need all the rest for surround for superb Sonos experience.What will this setup do in terms of surround?What do you guys think which setup is best?Any other tips and tricks?Very much appreciated!
Hi all,I am renovating a old house of >100 years and I am thinking about the audio set-up.I would like to have a nice audio system in the kitchen - Dining room - Sun room which will be an open space in which we will spend a lot of time.The dining room ceiling cannot be modified but their will be dropped ceilings in kitchen and sun room.I was thinking about putting pairs of Sonance in-ceiling in kitchen and sun room and a pair of In-wall in the dining room. Maybe later adding a Sub somewhere in the space if I feel the need (and have the budget….).This is a rather expensive set-up, probably with 2 Amp (one for the 4 in-ceilings and one for the in-walls) so I want to make it right.What do you think and do you have any better suggestions?Thank you!!
Already have an account? Login
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.