Answered

Hello all, I've got 4 monitor audio ceiling speakers (6ohms) that id like to use with a connect amp, they will be in two zones in a larger room so sometimes either pair would be used and sometimes all four would be used together. Has anyone had any experience using a speaker switch/impedance matching device such as the one linked below; https://www.parts-express.com/audtek-electronics-ss4-speaker-selector-impedance-matching-1-in-4-out--300-970 If so was there any noticeable affects on the sound quality or volume when using either pair or all four speakers. Thanks in advance Jon

I have a Connect device and I have an existing powered Kef sub. Can I get the sub to work effectively by plugging these together?

The PLAYBAR specs say that it can be paired with the SUB to create a 3.1 Home Theater system and further it can be paired with two PAY:3 speakers to create a 5.1 Home Theater system. If I don't have a SUB, can I pair just my two PLAY:3 to the PLAYBAR and does that work OK? Also, I have a CONNECT:AMP, can that be paired with the PLAYBAR and would that work OK? My CONNECT:AMP also has a its own Subwoofer, so will the Subwoofer connected to the CONNECT:AMP be able to be used with the PLAYBAR pairing to create a 5.1 Home Theater system? Thank you for your help with my questions. Scott

Hello, I'm wondering if I can stream music from my Sonos app into my google cast that is hooked up to my living room receiver? I currently have a 2 Connect + AMPs feeding two different sets of speakers but my living room receiver just has a Google chromecast and Apple Airport Express. I'd like to have my Sonos app streaming to the living room as well, but if I can spend $30 instead of $350 I'll go that route instead.

I have a pair of PLAY:1s in a stereo pair. Both connect to SonosNet via a BOOST. What happens if I directly connect the two speakers with an Ethernet cable? Will one of the speakers receive its communication over the wire, while the other talks to the BOOST wirelessly? Just curious, not trying to solve any problem I'm experiencing.

I just replaced my wireless router and now can't connect to my sonos system. Any advice?

I know, it's another DTS thread. Sonos, I have used your products over many years. I am very impressed and right now, you are the Apple of Speakers when it comes to terms of quality and sound. I own 4 x P1s, 2 x P3, Sub + 2 x Gen 2 Play 5's and the very ... very... sad Playbar. I have read many forums over the years and I have seen the anguish between many customers. I have never really commented because my patience was long and lasting... assuming one day you would care about this one point... but you are selling a locked eco-system that has the capability to drive customers mad. As I stated, you are the Apple of Speakers... but I feel like at times, there is a Steve Jobs at your company that is saying "no" to the bigger iPhone and watching customers endure the madness. What I am getting at is that it's 2016 and there are two things that are driving me mad (it's been a slow build up). 1. The new play 5's... the GEN 2s... some genius decided that the AUX ports are disabled whe

Hi, I currently own a Play 5 and a Bridge (both 3 years old) and I absolutely love the ease of use and the sound coming out of those speakers. The Bridge is in my living room next to the router and the Play 5 speaker is in the kitchen. I also use a separate, non-Sonos, system which consists of the following: In the living room: 1) NAD 3020 Receiver from the late 1980s - Has "Aux", "Phono", "Tuner", "Tape" inputs 2) Rega RP 1 turntable connected to the above NAD's Phono input 3) PSB Bookshelf speakers also wired into the above NAD In the bedroom: 1) In-wall speakers with homerun wiring that runs into the living room. They have their own volume control in the bedroom. But these speakers are not hooked up to anything so they are not in use right now. A friend recently gave me his old, in working condition, Zone Player 100 (ZP100). My goal is to build a whole-home audio streaming solution using the components I listed above AND the old ZP100. I'm thinking this is th

Hi.. It seems to move a speaker from room to room, it is a few buttons / change of room setups..etc Wondering if anyone knows if Sonos is planning to (or has work arounds) for having 1 speaker in multiple rooms. I get that if i'm trying to play different music in different rooms, a choice will have to be made for said speaker.. or maybe the option to play different music in those rooms is disabled.. But here is my scenario: I have a play bar, and two play speakers. They are set up with my tv as the bar and surround stereo speakers. Great. Now since the play speakers are kinda small, and somewhat portable, I planned to have one of them easily unplugable, so we can bring it to another room when we want, and play music in that other room (without playing on all the rest of the speakers). I'd like to do this easily.. not have to break up the home theater set up.. add it to another room.. then have to redo everything when i bring the speaker back. Seems like i should be able to throw

Hello, In the past, I've received messages on the Sonos android app that the Sonos App has an update available and I would usually ignore it, providing everything is working reasonably well. Today, however, for the first time, the android app would not let me access Sonos at all until I hit the red "Update" banner. Written above was "Sonos App Needs Updating". When I hit Update, I am taken to the Google sign-in page. I don't ever have my phone signed in to Google. I don't ever want to sign in to Google. But now I can't operate Sonos from my phone. Surely, considering I'm a paid up 'registered' Sonos owner, I could download the app directly from the Sonos website. Or maybe I can? Is that possible? Many thanks.

I purchased a Sonos Playbar and Sub with a Bridge a couple of years ago and they have been amazing ever since! In the near future I intent to purchase another playbar, some Play 5s, some Amps to drive ceiling speakers etc... We have very good wireless coverage throughout the house using Ubiquiti APs, but all Sonos devices are hard wired using CAT6, and I intend to keep this the same as I expand. With this in mind I was always under the impression that the Sonos Bridge was essentially the hub of the system, I thought it was what controlled the full system, kept the settings, organised the rooms, kept the login details for Spotify and other music solutions, pulled updated etc. From what I have been reading though, it is basically just an access point, is this correct? If this is the case then I don't need the bridge I don't think... Can someone confirm? If this is the case, then where are all the settings stored? Spotify is linked to Sonos so what device organises that ? How am I

I have set up 2 rooms however I can't see them both. If I want to say see the lounge I have to switch off the speaker in the bedroom.

Hi there I am wondering if it is possible to connect my home pc to my sonos system to play audio out. I currently have a standalone Bose 2.1 connected but want to play movies on my pc through my sonos system - is this possible and if so how. Many thanks

Do Sonos make a speaker that can used in a shower room or bathroom? I am aware that a Play 1 can be used in a humid atmosphere, but not sure if it would be suitable for a steamy atmosphere in a wet room.

have a play 5 and a play 3 in the same room and want to create a stereo pair. The app allows me to link either to another of the same, ie. two play 5's or two play 3's, but not one of each. Why is this? Surelt the technology is the same, just different speaker size and case sound path dynamics. I should be able to pair play 1 to play 3 and play 5.

Getting ready to purchase a Roku media streamer and was wanting to get one of the sideclick remotes. Does anyone have one or know if it is compatible with Sonos Playbase?

We are looking at purchasing a Sonos system for our office but we have a few specific requirements. I think we would probably get several Play 1 speakers and a Connect base station. These will all be on a wired Ethernet network. 1) Can we disable the volume controls on the speakers? We have problems when staff have control over the volume level. 2) Can we reduce the bass frequencies to an absolute minimum? We have one team who usually listen to music on a closed Macbook Air and they don't want a full frequency response speaker. 3) Can the volume of all speakers be controlled centrally? 4) Is there a client available for Macs and PCs that will enable playback of the streamed content using the computer's built-in speakers? Thanks

So I have decided to start on my second home theater system in the family room with Sonos. Anyone have experience with a play base sub combo with vaulted ceilings? How has it worked out for you and did truplay really help time the system right for your space?

Hello, I am wanting to enter the wireless world and free up some real estate and clean up our old ,but trusty multizone home theatre.I am looking at purchasing a Playbar, Sub, 2 Play 5's for rears and a connect amp to power my weather rated outdoor speakers. I like to have the ability to listen to music outside in stereo, while the wife or kids are watching tv or a movie in surround inside. We also enjoy watching movies or tv outside in the hot summer months through our big window where we see the tv...while hangin out in the pool...just in stereo is fine with just the two outdoor speakers. Is this possible with the sonos? With my yamaha rxv 2500..I just hit watch tv outside and with harmony remote it would switch automatically and voila! Just wondering if it would do it and if its not to encumbersome to do so before I make this awefully large purchase...cheers and thank you for any help.

Can someone advise I had a problem indexing my music library, in short, the sonos software would not allow me to remove a music share (music folder on my PC desktop) so I decided to uninstall all the controllers on 3 mobile phones and the software on my PC and try again. However, when I re-installed the software on my PC the problem remained. I therefore followed advice on this community and carried out a factory reset on both my Play 1's and my Play 5 (Gen 2). When I tried to follow the instructions to connect to a new system the network will not recognise any of the speakers. I have also tried to connect the Sonos 5 by Ethernet cable directly to the Router, the router detects the Sonos 5 but when the option to connect is selected the installation does not go any further and I am provided a warning that the system could not connect. I have ensured the Firewall is configured to allow Sonos controllers and have turned the firewall (Norton 360) off/disabled. I have also tried switc

Can the play bar connect wirelessly to the connect amp so that it can stream TV sound to the speakers connected to the connect amp?

Hi everyone… my first post here… (apologies it’s a long one)! I’m sure I’m not alone in having to juggle with integrating Sonos and historic AV equipment.... In the last year or so I have bought two Play 3’s - for the kitchen and dining room. They’ve done the job brilliantly. In my lounge I have the following setup: an old 42” Panasonic plasma TV connected to a Denon AVR-2312 - with B&W left, right and centre speakers. This setup works perfectly when watching TV - the sound when watching movies etc is amazing, even without a sub. The problem I have is when I want to listen to music. My Denon AVR no longer connects to my router - so I can’t stream music directly from my iPhone or Mac. The USB connection on the front of the AVR is also now not working! Research tells me these issues are not uncommon with Denon AVRs. At the moment, I connect an old Apple TV to my AVR and use Airplay. This works - but isn’t as slick as it should be! Yesterday, I decided to experiment and

I recently bought a Playbase and Hooked them up to 2 existing Play 3s for surround and they all sound fantastic, question is - would a sub make much off a difference? Room size is fairly large .

Hello all, I am currently using 4 ZP120 connect amps in various wired speaker zones at my home. I now would like to add 2 wireless speakers in my garage because its way too far away from everything else. Is there a way to do this using my ConnectAmp system?

I would like to use wired in ceiling speakers to avoid having to power each speaker. What is the best set up to use the sonos app for 12 speakers (3 rooms)? 3 Connect: Amp units?