Portable speakers

I’ve just added a Roam to my setup (so excited to finally have a little waterproof portable, it’s exactly what I have been missing!)However, I’ve noticed it is being extremely skippy, especially when I try and use it outside (For reference, I live in apartment that is less than 2000 square foot including the balcony, so not a huge space). But it isn’t limited to outside, that’s just where it is most obvious.My internet is 690mbps download / 205mbps upload on a Linksys Velop system with three nodes so I’m fairly confident that is strong enough ….. My setup is:Beam x 2 Play:1 surrounds on TVPlay:1 in kitchen2 x Symfonisk lamps stereo pair in the bedroomMove in study or on balcony Roam in bedroom / ensuite / balcony etcOne of the Symfonisk lamps is wired to a Velop node router so all wired Sonos are WM0, and the Move and Roam are WM1.Roam and Move both cut out A LOT on the balcony in particular, with the Roam clearly

My roam plays for 30-60 seconds then goes silent. It shows in the app as playing and the rest of the group continues to work fine. It happens on Bluetooth and wifi and comes back to life again after a reboot (15 second press of the back button) but then goes silent again.  I have spent two hours over two evenings with the online support who insisted it was a wifi issue and said they couldn’t help as I didnt have an Ethernet cable long enough to plug my router into the playbar 🤦🏻‍♂️ They have fobbed me off and said I need to call the helpline. They dismissed that it was a speaker fault even though the roam has the fault on Bluetooth and wifi and the rest of the system works fine.  Has anyone else had the same??

I have recently purchased a Sonos Roam as my first Sonos purchase, i was impressed with the quality of the sound coming out of this little guy. However each time it runs out of battery, I have difficulties in turning it back on/waking it up even though I have put it back on charge for at least 2 hours before attempting to power it up. I have installed the latest update for the software, Had anyone experiencing the same problem? As this is now turning into a massive disappointment for the product, what good is it to have a good sound but cannot be turned on!   

Finally got my Roam. Really disappointing. Charged it for four hours. Tried every adapter in my house. Finally to got 100%. Played for four minutes then turned off. Flashing red light. Left to charge again overnight. Turned on for ten minutes then turned off. App is saying 100% but won’t play. When operational, also dropped off my system every two minutes and need to be reconnected. Oh dear. Think I’ll need a replacement. And if that’s no better, refund. any thoughts? thanks!

I have a beam and 2 sonos 1’s linked together in my apartment. I bought the roam for trips and the beach etc. and just want it in my closet when I’m not using it. Problem is whenever I tell my Sonos Beam to play music on my devices it automatically turns on my roam. This is real annoying. Any thoughts or solutions to this? 

The Roam is off, however battery is still draining--significantly.I just received the Roam this week and have been using it on occasion, however I’ve noticed battery drain even when it’s “off.” I fully charged the Roam, used it to 87% (via wifi), shut it off and the next day it was down to 31%. If this is the performance expectation then I’m a little disappointed, and will likely be returning it.Any suggestions?Thanks!

I’ve got L+R Sonos Moves (MOVES) and a pair of Polk Atrium 6s that are connected to a Sonos CONNECT (PATIO).  When I play music, I group them all together and they sound great.  However, I have to set the volume level of PATIO 33% - 50% higher than the MOVES so I can approximate balance between the four.  Is there anything else I can do to achieve greater and better parity between the four?  

Bought the new Sonos Roam and love it, except I don’t think it’s working correctly. Works fine when plugged in and on wifi and connects to the other speakers in my home. When unplugged and in my house it no longer connects. When I take it outside off my Wifi, it doesn’t work at all. Appreciate it wouldn’t link to my other speakers when off wifi….but it should work. it’s as if it’s a portable speaker that isn’t portable? I’m sure I’ve done something wrong with the setup but can anyone help? I remember when I set it up initially my phone kept asking for something on a pop up but I had to switch that off as it was beyond annoying and drained my phone battery as well…..

Hi, I’ve been using Sonos since 2013 with few issues but I’m having a problem with my Roam that is frustrating, unpredictable and seems to have no solution other than to wait for it to sort itself out.The Roam is visible as “offline” when it is switched off but is not visible in the S2 app when switched on. It’s clearly still connected to the network in some way as the app shows when it’s switched off (visible in the app) and it disappears when it’s switched on. It can also replay the last music that was played on it by pressing the play/pause button, and given that the current album is stored on the network it clearly still has access to the network. I have tried changing the channel, resetting the router etc. but the problem persists. I have tried on multiple devices and the same problem occurs. I am not using a mesh or range extender so this is not the issue. I’m using an ASUS RT-AC88U with no issues and strong signal throughout the house, including the rooms that I h

I currently use the S1 app. Unfortunately I have 2 Play Five’s that I have yet to upgrade but I wish to do so but not been a priority. I wish to buy the Roam and I wondered if I can just download the S2 app and set up the Roam or if I need to have already switched my whole system over to the S2?I’m going away on holiday in a couple of weeks and don’t wish to wait on getting the Roam if I can help it.

My Sonos Move would not connect to my computer via Bluetooth. It worked previously. So I deleted the instance and tried to re-add without success. I would press the join button, Sonos Move would appear in my device list, I select, then I get error, “Unable to Connect”. So I moved to my Wi-Fi, no issues. So I thought my computer’s Bluetooth dongle was bad. I went to connect to my phone and that’s when I found the problem. Sonos Move was already connected to my phone. I disconnected from my phone, pressed the join button, and my PC connected to the Sonos Move again. Even though the Sonos Move stores up to six devices, it automatically connects to the first device it discovers.  I have a Bose Soundlink and it immediately announces which Bluetooth device I’m connected to. Is there a way for the Sonos Move to tell me which Bluetooth device it’s connected to? If not, is there a way to put in a features request?

My new Roam sound is perfect, but when on bluethooth from my Iphone, souds cut for 1 second every 3-4 minutes. My phone is close from the Sonos Roam. I do not have this issue on other bluetooth device. Any idea ?

When connected to my home wifi network I am able to start playing music on my Roam but Im unable to see whats playing, pause/stop or skip tracks in the app. The only control I seem to have over the speaker (in app) after music has started is adjusting the volume. Though I did notice the volume on thr Roam appears to be all the way down until adjusted the first time, then it seems to sync with the speaker.Should I be able to have more control over the speaker in app while on wifi? 

Hi, I have recently purchased a Sonos Roam primarily to use while in the garden. I have set the Roam  up in the kitchen (WiFi) and it is connected to a Sonos One (WiFi in the living room) ) a Sonos SL (Ethernet in the TV Room). Generally when playing in these locations the performance is fine, occasional buffering🥴. My problem starts when I attempt to move the roam into the garden, expecting it to pick up the Belkin  WiFi extender. Initially it works ( it is within WiFi range (confirmed through WiFi checked on iPhone) however it then stops. I have read on various forums that this is now a common problem. What is being done to correct this “NOT SO ROAM…..ABLE DEVICE.”

Ever since adding the Roam to my sister I have been running into the bug in the linked video. I have two systems and they are both doing it - one system is airplay compatible and the other isn’t. Video: https://imgur.com/gallery/Yxhe0iS Is this a known issue? Can I report a bug somewhere? 

I have 2 roams and factory reset both but when I reconnected one the other stopped flashing green and will no longer connect or turn on but will charge what can I do ?

Trying to use Sonos Roam via Bluetooth is a nightmare. The initial connection is complicated. The speaker doesn't know if it should be in pairing mode, or turn itself off. Once connected, keeping it connected is a circus. It will work for a minute and then cut out. Sometimes pushing the play button on the speaker will wake it up. Sometime pushing play on whatever app is playing music will wake it up. Sometime pushing the power button on the speaker will wake it up. SOMETIMES the phone says it's connected to the speaker, music is playing, but no sound is coming from the speaker. Apps in use were Spotify and Pandora. Also connected to the phone was a Whoop. Unless there's any good ideas here, I'm thinking of returning it and just stick with my old Wonderboom.

Got my Roam a few weeks ago, connected to my system and played a few songs to test it out.  Came back to it and it’s now missing from the app. The light is blinking orange when not charging and solid orange when charging.  one of the help articles instructed me to do a factory reset which starts by unplugging and press/hold the rear button until I hear a chime. But I never hear a chime and it never turns off.  I can’t get the rear button to do anything and thus can’t reconnect it.  ideas? -    

Hi, all, When connecting the Roam to a laptop or android phone via Bluetooth, the music makes small pauses every few seconds. I've also tried playing YouTube music on the phone and playing it via Bluetooth to the Roam and than connecting it to the Beam via WiFi, and the music still makes this small pauses. I've tried forgeting the divice on the laptop, reseting the Roam and the problem still continues. Does anyone know how to fix this problem? 

Hi there,I have a mid-2014 macbook pro + macOS 11.0.1 and I’m able to connect to my sonos roam via bluetooth but for some reason it won’t play anything, or more like I can’t select it as the sound output. It’s not greyed out but nothing happens when I click it. I tried using the roam with a mid-2015 macbook + same OS and it worked fine, same with my iphone and projector. My mid-2014 macbook works fine with other bluetooth devices (airpods, urbanears headphone, wonderboom speaker, JBL headphone) so I’m not sure what the issue is. I’ve tried restarting my laptop and resetting the bluetooth module, but nothing worked. It looks like it might be a mac issue more than an issue with the roam, but they both work fine with other devices so I’m super confused. Any help is highly appreciated! Thanks!

My wife and I have been trying to connect our Roam everyday since May 10th. Here are some issues we’ve experience - just wondering if anyone has experienced the same.  Roam will not connect to wifi phone will not connect to the roams wifi roam will turn itself off during set up Roam will not turn back on for hours  set up will complete but the roam does not appear, when doing a restart it suddenly is not connecting to anything.  Roam is not making a chime during set up Roam does not make sounds while turning off or on  Roam does not accept the phone tapping on the back of it. It automatically cancels once it completes.  every set up sequence is different.This has been one of the most frustrating experiences dealing with this. I’m looking for a little insight before I spend hours on customer service. We don’t have a receipt for our roam either. It was a gift and the individ

Just bought a roam yesterday. I’m having issues with the Wi-Fi not connecting and the device not being recognized by my phone app. I literally have to reset my router anytime I wanna use it… Also, as an aside, the power button sucks and it sucks that it’s combined with the Bluetooth pairing.  Think I might return the device. 

Can i use at the same time Roam and Five? Simultaneously connected with the same music?Thanks. 

I recently purchased a Roam so I can play music without the Sonos app. I have an existing Play:1, which I added to the Roam’s system. Is there anyway for the Play:1 to also work when I am connected to the Roam via Bluetooth? The two speakers play fine together when I use the Sonos app over wifi. Based on this article, it seems like I am out of luck. But maybe I am wrong. https://support.sonos.com/s/article/1066?language=en_US

Hi, I purchased a Sonos Move a few weeks ago. Currently, my Sonos system consists of: Play 5 (Gen1), One SL, One, Boost, Play:1. The move was working great until about a week ago. All of the sudden it just keeps dropping out of my controller App. This happens every morning when I wake up, it is gone and at least 1 or 2 times throughout the day it just stops playing and drops off. I have to hold the power button in on the unit to reset. Once it boots up, then it is shown on the network in the app. This is super annoying. I am not sure what happened to it as we didn’t change anything. How can we fix it? We are using the S1 controller app until we update the Play 5.