Advanced setups

This is the place to troubleshoot your Sonos hacks, advanced setups, and third party integrations. Be mindful of your products warranty, and that Sonos staff can't always assist in an official capacity here.

  • 1,887 Topics
  • 12,508 Replies
D
DorianBriand
started this topic

Era 300 placement for surround

Hello everyone,I would like to have your opinion and your suggestions on the future placement of my Era 300 which I will receive shortly. I...
  • 0
  • 9
Corry P
Corry P
solved this question

Sonos and Mesh network

Hi @Bourney Welcome to the Sonos Community!I believe that system will work with your Sonos without issue, yes.Please note that when you add...
  • 0
  • 3
ratty
ratty
solved this question

Two systems on one wifi network, with only one phone controller?

As you perhaps realise, one set of speakers would need to be factory reset and then set up afresh as a ‘new system’ while the other set is t...
  • 0
  • 14

1887 Topics

X
Xfox1Contributor I
asked in Advanced setups

HTTP POST always returns 500

I am trying to develop my own app to play audioclips on my Sonos One (Gen1). I was able to generate the token for the authentication and correctly perform all the GET operations (e.g. https://api.ws.sonos.com/control/api/v1/groups/{groupID}/groupVolume) but not POST operations. All the posts return me a 500 Internal Server error without content. I am trying to perform this requests with Postman. Already tried to google my problem but the solutions I found implements a different protocol with node.js. Someone suggested to look for the requests made by the official application with wireshark but apparently it does communicate directly with the speaker (at its local IP address). Does anyone has the same problem?

2
X
4 years ago
D
danwoollerTrending Lyricist I
posted in Advanced setups

HTTP Post Command Reference for Tasker

I'm new to Sonos, but would like to setup some Tasker tasks in Android to automate playing my favourite radio station, launching playlists, etc. Is there a reference for http POST commands that I could work from? Could someone point me in the right direction? My aim is to use Tasker with NFC tags to activate theses common tasks without the need to go into the app.

29
A
4 years ago
P
pj_teeterContributor I
asked in Advanced setups

Pass multicast traffic between wired & wireless

I spent part of the day with the installer then a couple more hours on the phone with Sonos support. Still can't get ny new Playable + Amp x2 provisioned properly. Here's my simplified network topography: Internet ==> Arris BGW-210-700 ==> Cisco RV130 (gateway) ==> Cisco 3560cg (core switch) ==> Netgear GS108 ==> Playbase / Amp 1 / Amp 2 (wired connection) All of the Sonos gear lives in VLAN101, 192.168.20.0/23. The Netgear is wired into port 2 on the 3560cg. Also, off the Cisco RV130 is this path... ==> Linksys LGS 116P ==> Cisco WLC 3504 The WLC3504 broadcasts an SSID on the same VLAN101, Apple iOS clients will join that SSID to setup & then control the Sonos gear. After countless attempts to get the gear setup, both with each wired to the Netgear GS108 and each joined the SSID on VLAN101, I had no success. Sonos device based diagnostics informed us that multicast traffic is not being transmitted at all or at least properly. The Sonos device do obtain

3
P
4 years ago
D
darrenswanContributor I
asked in Advanced setups

Hospitality VLAN

Is it possible to have a 24 room setup with PlayBar/Beams in each room, with the following scenario: Reception can see and control all 24 SONOS bars, and guests on their local VLAN can see and control only the one in their room?

8
D
4 years ago
L
Lemm76Contributor I
asked in Advanced setups

2 TVs into one Beam

Hi, I am wondering if anyone can help me. I am building a new house and I am planning to have 2 TVs in my games room for watching sport / music videos etc. I want to mount one Sonos Beam under the TVs and (other than keep swapping cables) be able to switch between the two TVs as to which sound is being played by the Beam. I understand the situation with the HDMI ARC and so my question is, can I use a HDMI matrix with two HDMI inputs and one HDMI output to achieve this. Each TV would have a HDMI cable from the ARC port on the TV going into the inputs on the HDMI switch. There would then be another HDMI cable from the output on the switch into the Beam. I would switch between the 2 using the remote for the switch. Would this work? I presume I would need to find a switch which supports ARC. Thanks in advance Lemm

1
buzz
4 years ago
G
geeeyeteeTrending Lyricist I
posted in Advanced setups

"SonosAmpJuicePi"- solution for automatically powering on/off amps

I recently completed a four-room setup in my home that required that multiple centrally-located amplifiers be powered on and off automatically based on what their corresponding Sonos Connects were up to. My solution is centered on a Raspberry Pi 2 and a dusting of code on top of the summit built buy @jishi from this forum. I have attached a photo of what it physically looks like in my case. And here a copy of the Readme from the code's GitHub page. I hope others may be able to benefit! https://github.com/geeeyetee/SonosAmpJuicePi [h1]SonosAmpJuicePi[/h1] [h2]Purpose[/h2] The purpose of this application is to turn power off and on at the mains for centrally-located amplifiers/receivers, using GPIO pins on the Raspberry Pi connected to relays (such as the PowerSwitch Tail). [h2]App.js[/h2] [list] [*]Edit the `amps` variable to associate each of your sonos player/room names with a GPIO physical pin number (which you in turn have connected to a relay that controls power to th

8
G
4 years ago
AjTrek1
AjTrek1
posted in Advanced setups

Removing the 'On this iPhone, iPad, or iPod Touch' feature and NAS Option

This previously announced topic may have sent some into a panic mode. :fearful: Rest assured it’s not the end of your enjoyment of Sonos. There are many helpful guides/suggestions in [u]Sonos Support and the Community[/u] to assist you in keeping your Sonos up and running. I’ve compiled a list of helpful links below. Some may also be wondering what type of [b]Network Attached Storage[/b] device (NAS) to purchase; if that is your chosen resolution. With the many NAS devices on the market there are plenty to choose from. The amount of information regarding their Pro’s and Con’s can be confusing. [i]Just FYI….A NAS device consists of a hard drive (HD) for storage just like a computer. Also, just like a computer the HD can fail which is why it’s always recommended to employ a backup scheme using an external USB drive.[/i] Therefore, if you purchase a NAS device with a single HD then make sure an external USB drive can be attached for backup. Some NAS devices will require that you manua

3
AjTrek1
4 years ago
S
SP_1Contributor I
asked in Advanced setups

Music Library on external HD connected via USB

Hi will music stored on an external hard drive and connected into my router via a USB be picked up by the sonos app?

21
controlav
4 years ago
R
Ryder92Contributor I
asked in Advanced setups

Setup and Input lag. HDMI, 4k Projector, SPDIF, and a computer?

Hey, apologies if this has been asked before, I just want to check something before dropping too much money. My plan is to use my desktop as a multimedia station with an HDMI running from my 1080ti to a 4k projector (Viewsonic PX747) and the SPDIF running to the back of my playbar. I've also got 4 Sonos one's that will be in the mix. I basically just want to confirm that this setup won't incur any significant audio lag? I used to run the same setup, but with a 1080p monitor and every few weeks or so would run into incremental issues with lag (not sure why). Would appreciate any comments/advice.

6
R
4 years ago
N
nate_12Contributor I
asked in Advanced setups

new Sonos Amp and in-wall volume controls

I have two separate sets of ceiling speakers (8ohm) wired to in-wall Impedance Matching volume knobs. I would like to use the new Sonos Amp to power both sets of speakers, will the Volume knobs pose any issues? Thanks in advance for any insight.

1
Stanley_4
4 years ago
B
blizzardscout2Contributor I
asked in Advanced setups

Sonos Amp audio out to Denon AV Receiver

So I have 3 Amps now that replaced my Russound (whole house audio). The amps are powering 12 speakers throughout my house and they sit next to my Denon AV. I have a connect that I streamed music to my Russound and ran audio output to my Denon for the living speakers. I would like to run an output from my Amp to accomplish the same goal. Is this possible utilizing just the amp? Or do I need to use the connect for that purpose? Thanks for your help. Reese

1
Stanley_4
4 years ago
S
sydneykmking
posted in Advanced setups

Verizon Jetpack connecting with Sonos?

We have wifi through a Verizon Jetpack, does anyone know how to successfully connect Sonos through the jetpack? It looks like I cannot set the Jetpack to a static IP address, instead it applies a different IP to each device connected. I did not know if there is a way to create the static IP through my laptop and connect Sonos through that? If anyone has successfully connected a Sonos System by using the Verizon Jetpack, I'd appreciate your thoughts/information! (I have a Sonos 1, if that information is relevant).

5
A
4 years ago
F
FlorianBaaskeContributor I
asked in Advanced setups

Sonos Group and Aruba Wifi

Hi, I have my Sonos System (Playbase, Sub and 2 Play1) up and running using a wired connection. Now, I would like to bring the Speakers on my wifi. I have created a separate SSID, just for Sonos, with the recommendations here from the forum. The playbase comes up and I can play music on the playbase using my phone or tablet or whatever. But the Sub and the 2 Play1 will not join the group. They are connected to the Wifi, but they will not form the group. anything special I need to consider, to get this working as well? BR Florian

10
F
4 years ago
J
johndodds633Contributor I
asked in Advanced setups

Pro-Ject Essential III Bluetooth Issues

I received the Vinyl Pro Set ordered from the Sonos website as a wedding gift. The box I received contains two Play 5 speakers and a Pro-Ject Essential III Phono turntable. I cannot seem to connect the turntable to Bluetooth so I can stream my records. The instructions for the turntable are no help. Please let me know what I need to do. Thanks so much for the help.

1
Airgetlam
4 years ago
S
servantleaderContributor I
asked in Advanced setups

Controller & Router Reset

I had to replace my router. Unfortunately, i decided to reset my controller. Now my system will not connect even with an existing speaker plugged into the new router. I cannot get the app and a speaker functioning together.

10
buzz
4 years ago
I
i3eezenotchContributor I
asked in Advanced setups

PLEASE HELP -- Using Sonos for Klipsch wired speakers + Onkyo HT system.

Hi guys, I just purchased a Klipsch home theater system and I am hoping to also connect speakers in other rooms to the system as a separate zone setup for wireless. I was planning to try to run wires through the condo, but it's a pain, so I was considering getting the rocketfish wireless unit just to connect to my Onkyo's zone 2 and 3 outputs. I've recently come across the Sonos and I am wondering if it can help me achieve the same thing with better quality and also I hope you can help me figure out the most cost-effective way to do this (do I need to get a Sonos connect:amp for everything? What else do I need to get everything going?). The background: I purchased a Klipsch reference bundle, but ended up getting the reference premier set as well. Now I will be selling the reference subwoofer and center speaker and the yamaha receiver that came with the reference bundle, but keeping everything else. Here is my hopeful plan if you guys can help it come to fruition: Home th

3
I
4 years ago
C
cheddardonkeyContributor III
posted in Advanced setups

Using Playbar with Chromecast audio optical

I have a playbar with a toslink splitter, connected to TV on on side and a Chromecast audio dongle with toslink output. This works as a Chromecast workaround however the playbar assumes the Chromecast optical signal is a TV signal. Therefore dialogue enhancement etc is available but the rear speakers in my 5.1 setup only play ambient sound from the audio track. Anyone else tried this or have a way to make it work? I wish Sonos would add an option in the surrounds settings for full range rears from TV like they offer for music That would solve my problem. When linked to more rooms it sounds great on my other stereo pairs, just not in the 5.1 room.

3
Chris
4 years ago
Mutti
Mutti
posted in Advanced setups

Where are my favorite

Hi all. I had to move one Sonos beam from one wifi network to another. Since the app did not worked out (1st problem), I've decided to factory reset the device and then reconnect it to the new wifi network. After all the configuration, I was expecting that all my favorites were reloaded as before, The fact is that I have the black band with the announcement about the "my favorite" feature, but it doesn't work 🙄. Any ideas on how to restore them?

5
Mutti
4 years ago
F
fallcityContributor I
asked in Advanced setups

Wireless range extender error message - but there is nothing wrong

I have an ASUS router (RT-AC88U) with both wired and wireless speaker connections. I have an ASUS repeater (RP-AC68U) connected (wireless) to the router. Finally i have one speaker that is hard wired to the repeater. Everything works great. I can group all of the speakers if I want. I can control the music anywhere on the network. However, the Sonos app insists there is a problem and pops an error message when I do just about anything in the app. It doesn't impact the functionality, but it is annoying as it comes up all. the. time. Is there anyway to turn off this prompt? [img]https://uploads-eu-west-1.insided.com/sonos-en/attachment/782fca1f-7b12-4782-b371-a5a39e8f3257.jpg[/img]

4
Smilja
4 years ago
T
tempoContributor I
asked in Advanced setups

Discrete 5.1 surround via Airplay ?

Hi, I would like to AirPlay discrete 5.1 from my Mac or iPhone XS to a Sonos Beam. My Sonos Beam is grouped with two Play: 3s as LS + RS speakers. When I connect to AirPlay and open Audio MIDI Setup, AirPlay only has the option of 2 outputs, and can't be configured for 5.1 surround. Similarly, everything I stream from my Mac or iPhoneXS is downmixed to stereo. How do I get discrete 5.1 setup using Airplay ? If it's not possible, how can I get discrete 5.1 surround from my Mac to either a Sonos Beam or Playbar ? My Macbook Pro doesn't support ARC HDMI or Optical Audio Out. Current setup: Macbook Pro OSX 10.14.4 Sonos Beam Sonos Play: 3 (LS) Sonos Play: 3 (RS)

10
controlav
4 years ago
renowden
renowdenAvid Contributor I
posted in Advanced setups

Line-In compression

Hi - it is a while since I looked at this and I have a few queries. I presume that it is digital stream compression not audio compression/limiting as used by radio stations, that wouldn't make sense? I see that there is now an "automatic" option. Does any one know exactly what that means? Do we know if it is lossless (as per FLAC which achieves quite good compression wrt WAV)? Or is it lossy (as per MP3)? I am asking because I have been using line in from my Hi-Fi and recently it has started to break up. I found that it was set to automatic. Changing it to compressed removes the problem - I have not tried using uncompressed yet.

8
A
4 years ago
M
marcus26Contributor I
posted in Advanced setups

Time Based Volume Limits

I am really hoping that we could have a time based volume limits setting. This would mean you could set multiple volume limits which apply at different points in the day. Therefore if 9pm the volume automatically reduces to the 9pm volume limit.

3
Jeff S
4 years ago
B
boblichensTrending Lyricist I
asked in Advanced setups

Powered Analog Sub with Sonos Connect

My current setup for surround is a Playbase for the front with 2 Ones as the rear speakers but no sub. I’d like to use my powered analog Yamaha sub to complete everything and am considering the Connect (not the Connect Amp) Will this work?

7
melvimbe
4 years ago
Meaty Albatros
Meaty AlbatrosContributor III
posted in Advanced setups

Using a Bluetooth Transmitter and a Connect to play through BT speakers?

I've searched a bit through the forums on this topic but need something clarified. I have existing wired outdoor speakers connected to a Connect to give me Sonos control over them. Part of my yard isn't feasible for wiring so I'd like to add two (battery powered) Bluetooth speakers to this set up. Questions: [1] I assume a Bluetooth transmitter gets connected to the Audio OUT RCA jacks on the Connect? [2] The existing Sonos Connect connects to the wired speaker amp via the RCA Out jacks; Can I piggyback the BT transmitter to this same connect buy using y-splitters for the L and R RCA out jacks or do I need an additional Connect module? [3] Or can I just use the single Coax Out for the BT transmitter? Thanks!

6
ratty
4 years ago
G
GabogrfContributor I
asked in Advanced setups

SONOS Beam has Boost mode?

The speaker SONOS ONE has boost mode, to help to connect anothers speakers with own WIFI, but my question is, the SONOS BEAM also has boost mode? Or not?

1
Smilja
4 years ago
Terms & ConditionsCookie settings