Speakers

I would like a feature (which I think is deficient by its absence today) in the app that allows you to toggle the Move into Bluetooth and Wifi mode.  Sometimes I switch my move to bluetooth to pair with my TV streaming device in the bedroom. After the film is done, I would like to be able to switch the move back to wifi and be able to use its voice control etc without having to get back out of bed! Thanks.

Thought I’d take my Sonos Roam on holiday.    Didn’t work.  Couldn’t connect to WiFi as the hotel (Radisson), like most, uses open access WiFi so instead of a password, you sign in with room number and family name.   I kinda accepted that, though far from ideal, but I couldn’t even get the Roam to work via Bluetooth.   I had the hotel IT guy try various workarounds for an hour but he had to give up.   Does anyone know a solution for this?   Cheers. 

As title, Sonos speaker wireless cant connect app via wifi without peer to peer?

Feature:Would be great to have a reminder function in the app for user to bing the Sonos Move back in the house, e.g. an alarm that goes off if the Sonos Move is not back on the charger at a set time like 1amRationale:I do have the Sonos Move for round about 3 months. However, I already forgot the Sonos Move 3- 4 times outside on the terrace of my house. Once of course in pouring rain all night long - all good. A Friend mentioned the same is happening to him.Forgetting the Sonos Move outside Seems to happen when enjoying this great piece of equipment.     

How to fix this? 

Is SUB compatible with SONOS 5 gen 1 AND 2?  

The Roam charger cord is permanently attached to the base, which is already bad, but then the other end of the cable is a USB-A plug.  Welcome to 2015.  

Is it possible to have a quicker way to switch between Ambient and Full modes when listening to music? Depending on where I am in the room I may bounce between the two modes, currently a bit tedious to navigate through the settings to do this. A simple button on the main playback screen should suffice 

I setup successfully my SYMFONISK speaker using my Sonos App in my Android phone. Few days later, I use my friend’s iPhone to setup the same but with different Sonos account. she was not able to. Now my Sonos App also not able to connect to my SYMFONISK speaker.  Does anyone encountered this?

Hi my Sonos Move doesn’t charge through the USB-C port, never has worked. Is there a setting that I don’t know about or is this a common issue? I’ve seen a few people saying the same thing. I only discovered the port a few weeks ago and i’ve tried various different chargers none work at all. 

could there be any issues if sonos fives and sub are always plugged in but I play only for some time(1 hour) ?

Hello Everyone,Below is a simple trick to use your Sonos 5 playback as a normal AMP speaker with Line-In without any delay.1-Reset Sonos, walkthrough initial product setup using wired network connection.2-set delay to 75-ms and disable compression3-connect audio jack from both ends, make sure you can hear the sound of the device connected and playing ( you will notice the delay )4-disconnect or unplug the ethernet, no more delay, and Sonos can now be used as generic speaker. Tip: if you have a managed or smart network switch, you can remotely control the network interface connected to Sonos, so you can switch between Sonos mode and Speaker only mode! Hope this will help someone in the feature. Best

my roam stopped working last night. it just says offline. i reset the speaker, re added it, it took a while to “connect” to my wifi, and still says offline.  nothing else in my house has an issue

Hi all. I'm a complete technophobe but I have a sonos 1 that I love, and want to be able to listen to my TV at the kind of volume I can listen to music on my sonos 1. If I buy a sonos ray, can I pair/group it with my existing sonos 1, so I can listen to the TV through my sonos 1 in a different room and/or listen to the TV loud in one room by using both at the same time (or even by having them both in the same room but then just using the voluminous sonos 1, with sonos ray on silent)?

Hi, I was wondering best way to get this done, Moving from UK to US with my Sonos Arc,  what would be the best solution?1.I checked with Shipping companies and the measurement seem to be to big for shipping.2. Doesnt seem possible to get on to a flight unless a purchase an extra seat which is not worth it.3. Should i sell in Uk and purchase new one in the US? any advice on this would be appreciated. 

Hi there, I just bought an Arc for my tv room and have a very basic doubt. One of the side walls of the room has a large wide glass door. It goes from floor to ceiling and covers most of the wall, except for the front corner right at the side of the Arc, where there's a wooden door, and the rear corner where there's another wooden door. So what would be better, in terms of Arc’s virtual surround: closing the drapes (black-out plastic layer outwards, thin blue-jean layer fabric inwards), or just leave the bare glass? I obviously lean towards the first option to avoid glare, but I wonder what would be better for audio accuracy’s sake.Thanks in advance for any input!

Hi all new to the forum, but far from new to Sonos.Fantastic products that are bloody addictive  I've been speaking to Sonos direct about this was advised to come here and hopefully some of there engineers and software developers are lurking around here.  My question is who here would love to see Sonos add a feature in the app for individual sub gain/volume and sub frequency. For those that have 2 subs in there HT setup this proposal to Sonos will allow the users more fine tuning setup, in return suiting different rooms and distances etc etc and also if this is possible have a sub frequency option so we can adjust the frequency to our taste and liking and setups 30/40hz and up they sound like there preset @ 80hz minI feel very strongly about both of these should be in the app so the user has full control. It's not the case of one size fits all, I believe this would be welcomed worldwide from a Very large volume of usersa simple yes or no reply would work great.I'd like to get and gain

One of my Roams is discharging on the charger. I’ve spent hours chatting, talking on the phone (mostly on hold), submitting diagognistic reports and emailing for 2 weeks and no action, no answers, just the same explanation...

Hi people. Will a sonos ikea lamp bought in canada work in Ireland.  I know all the other speakers are 120/240v 50/60hz but not sure if the lamps are the same. 

Hello, i just buyed a sonos move, i read that the battery might be changed after 3 years..on the sonos web site the battery kit is out of stock. Does anyone knows if they’re still producing that one or it just ended here?? otherwise i will just give it back :(

I know the shelf is technically not a Sonos product, but there is no one to contact at Ikea.   Basically, the Wireless charging on the shelf is horrible!  Takes me like 2-3 minutes to find the right spot to charge the phone even though they put a big plus on it where the device is supposed to go.  

Hi, I can get either my Arc and Sub to show up on the app, but not my three amps. If I delete the app and reload then I can get the three amps to show up, but not the Arc or Sub. I have tried wired individually and daisy chained and wireless, nothing seems to work. I have wired speakers connected to the amps, then work on individual TV’s, but not with the ARC and Sub. Is there something, I am missing?

Hi,I’m trying to setup a network firewall with multiple VLANs. I found the page telling us which ports that we need to open up for sonos to work with a firewall in place. Currently the page only tells us what port and protocol (TCP / UDP) that sonos uses.I would like to know the source and destination for the firewall rules. Could we get more clarification in a format that also tells us the reasoning, source, destination, port, and protocol? Possible example below:Music Services Source: Sonos Device Destination: Internet Port 80 and 443 Protocol: TCP Sonos App Control Source: Client (iOS, Android, Mac, etc...) Destination: Sonos Device Port: xxx Protocol: UDP Casting Music: Source: Sonos Device Destination: Client (iOS, Android, Mac, etc...) Port: 30000-65,535 Protocol: TCP  Reference to the page that lists all the ports that sonos uses:https://support.sonos.com/s/article/688?language=en_US

Have a whole home Sonos installation including one Sonos Move. I've just added a Roam to use in my bathroom. It's off the charger and has gone to sleep, and appears that way in the app.  Do I really have to hit a button on it to wake it up? Can't I wake it from the app like the Move? (Slightly worried I've accidentally bought something I don't want)

Hitrying to connect two roams and a move. Can’t get the second roam to play music . I can see it in my list of products , the volume control is there - but no sound any advice welcome thx