Spaces & Setups

I know that there is a lot of topic about, but I am not able to make my Sonos Playbase to work with my computer.  I bought an OPTICAL CABLE, it is connected I can see the light at end, plug into the playbase and nothing.

Hello - I have an AMP inside the house that wires through the walls to two outdoor speakers R+L and I was wondering if I can connect these wirelessly to my Samsung Terrace TV. Is there some sort of transmitter that will allow me to do this without having to purchase a weatherized Sonos soundbar to wirelessly connect them together? Best,Chris 

As per the title, nice to just let it finish rather than either stopping or waiting around to end of track because you’d like to hear it anyway.

I’m using an LG OLED55B6 TV with HDMI ARC output to HDMI input of Sonos Amp. The Sonos Amp powers L&R passive front speakers and is also connected to Sonos Sub 3 and 2x Play Ones as rear surround speakers.Using a Dolby 5.1 source from Apple TV 4K fed to TV via HDMI 1 I can only get ‘PCM Stereo’ shown on S2 App, confirmed by the Play Ones outputting  the same signals as the L&R front.Sonos CS tell me that with passives connected as front channel, the Sonos Amp will only operate in 2.1 mode. Before returning the kit to Sonos, has anyone managed to get a Sonos Amp working in 5.1 or, more accurately, 4.1 since it has a ‘phantom’ centre front?Any advice or comments would be much appreciated! All the research I did prior to purchase indicated that 5.1 was possible with this configuration.Many thanks,Melchet.

Hello,I recently purchased HDFURY ARCANA. I connected my Apple  tv 4k(latest) to Sonos arc for audio and BENQ TK850 Projector for video. Both with ultra high speed HDMI cables. Everything works well but I am not able to control my SONSOS ARC volume with apple remote anymore. Without ARCANA( if I connect my Apple TV  to benq and use it’s eARC to SONOS ARC, I could control the volume. Is there any fix for this remote problem?Note: Benq TK850 eARC supports only two channel stereo so it’s not really a true eARC.

Even when i Am sure that im listening dolby atmos ,in sonos app appears only 5.1,so i need to go to the arc then i unplug it, wait for a minute and finally appears Dolby Atmos in sonos App, after three hours… dolby atmos is leaving again, its so frustrating, thanks for your help!!

So disappointed with my Sonos. Cannot connect via the app. Always says "cannot find existing Sonos system" .Yet a scheduled playlist I set up years ago on Plex still regularly plays at 7:30 everyday. How is it that Plex can connect to Sonos without a hitch to but the official Sonos app fails. I had plans on buying a Sonos for every room of my house, but that would be a waste of my time and money.I have tried Sonos support and I'm tired of being told it's my WiFi that is the problem. I have superb WiFi.  The app fails to connect even when I plug a network cable directly.You have lost my business Sonos. Congratulations on your total failure. 

I currently have a play 3 in my bedroom and it’s great for music.  I’m going to upgrade the sound on my TV so I’ve considered buying a Beam.  How is the Beam compared to the Play 3 for music? If I buy a beam I will move the Play 3 to another room.  Will the sound quality for music on the Beam be comparable to the Play 3?  If not I’ll just buy a lower cost sound bar for the TV and keep the Play 3 for music.Thanks

Hello; I’m using a Samsung TAB A for my Sonos 2 controller, version 13.3. I want to upgrade to a Windows 10 or 11 Surface Pro 7 Notebook, so will the Sonos 2 controller load and work on a WIN  10 or 11 device? The online results are contradictory & not clear, nothing new there! Thanks, Stef 11

Hi all , I currently have a Yamaha sound bar that's rated at 120watt power output , ideal listening volume is near 80 on the volume slider , my living room is about 13ft X 12ft and I sit about 10ft away from the TV , I'm worried that if I get the gen 2 beam that it won't be as loud because Sonos don't specify the power output , does it go fairly loud ??? Considering the size ?? 

Hi all , I'm thinking of getting the beam 2 but I need to check a couple of things before I get one , I know it doesn't have Bluetooth but 1 ... can I play music files off my phone on the beam gen 2 ???? And2 ... can I play internet radio stations via the app ??? Thanks  

Hi there.  Just wondering if there is anyway disconnect from Tune-In Radio and just add internet streams with out it?  I've got all kind of urls I use with JRiver and on my phone.  Stream quality is higher, delay is shorter and no ads.Thanks

Hi All I have a Sonos Beam (Gen1) and a Sony TV. (But I don't run the full Sub and Surround sound configuration). I'm happy enough with this and Movies play back through it really well.However most standard TV is transmitted as basic Stereo or Dolby 5.1 which is obviously has a much lower effect for general playback. Recently the Sony TV developed a fault and as it is still in warranty Sony will be replacing with an upgrade.They will be replacing with the below upgrade.https://www.sony.co.uk/electronics/support/televisions-projectors-lcd-tvs-android-/xr-50x90j/specificationsOne of the features is Sound upscaling which is all good stuff and will try and increase the sound quality from Stereo to 5.1 and so on and so on.Im a little concerned however this benefit wont be passed to the soundbar and lost along the way does anyone have any experience with sound upscaling and the resulting output.Again not looking for excellence just any improvement.. :)KrPaul

Hi!  I am thinking about getting my first turntable.  I want one of ProJects turntable cause of the built in preamp. But what type and model?  And also: what shoul i buy of the port and amp? Whats the big difference? Somewhere down the road i might want to buy new speakers, and a different brand than Sonos. 

I recently bought a set of Sonos SL speakers to use as a set of Surrounds to use with my Sonos Beam (connected ARC to a LG C1 TV). Using my iPhone or iPad, I use to be able to airdrop to the Beam speaker from the Apple Music App. After adding these as Surround speakers to the Beam it is now asking for an Airplay Password for the Beam. I tried the Sonos password and it does not work. What password is it asking for or how do I correct this?

Hopefully and easy one, do the Play One, and One fit all the same speaker stands as each other. The Flexson I’m looking at (FLXS1FS1021U) only makes mention of the Sonos one

Hi,Looking to use the 12v trigger on my new Sonos Port to turn on my receiver when I start playing music through the port. I do not have an input on my Pioneer Receiver to connect to the port. Is there an adaptor or additional component like this in North America that will work? https://www.audiophonics.fr/en/diy-kits-and-boards/audiophonics-trigger-12v-230v-slave-power-supply-device-p-10661.html

I'm about to go ahead with upgrading my Play:1 in favour of the One SL. They look pretty much the same, so does anyone know if the speaker stands that I have for my Play:1 will fit just the same for the One SL?I've tried searching, but only seem to come up with the most inappropriate of answers!Thanks in advance.

I have a new Arc connected to the eArc HDMI port on my Sony A80J. I have an Apple TV 4K. On my TV- when I have the passthrough setting turned on, and I watch an ATMOS program on my Apple TV, the sonos app shows “DOLBY ATMOS”. If I turn the passthrough off, the Sonos app reports atmos programming as “DOLBY ATMOS (DD+)” Am I actually getting different sound here? If there is I can’t really tell. Is there really a difference when the sonos reports DOLBY ATMOS vs DOLBY ATMOS (DD+)?

What do I really have here. Have the Play Bar and Two of the SL Ones. Was looking for a home theater type system to replace an older Bose 5.1 system.thanks 

I am able to sync the Fios remote to control the volume though the Sonos Beam when I am watching Fios cable TV.  When I switch over to an app (Netflix, Hulu, HBO Max) the Fios remote doesn’t work to control the volume.  The Sony/TV a remote doesn’t work for the volume either.  How do I get one remote to control everything?

I have the following equipment, on three different floors of my house:Room A: 2 Fives (stereo pair)Room B: 1 OneRoom C: 1 Play:5 (gen 1)Rooms A and B are controlled by S2 (iPhone)Room C is controlled by S1 (iPhone)Everything has been working perfectly, exactly as expected, for quite some time. Last evening, though, though, I experienced a particularly annoying issue --Room A was active -- streaming from TuneIn Radio. Rooms B and C were inactive. The S2 controller suddenly popped up a message that an additional Sonos system had been found and was incompatible with S2, and it asked how I wanted to proceed.That is, the old Play:5 had been discovered by S2. I had the choice of adding the Play:5 (which of course would not be allowed) or taking additional action. ‘Taking additional action’, as far as I could tell, involved resetting the S2 system, which of course I also didn’t want to do.I was stuck in an infinite loop. Closing/reopening S2 by itself did not make the message go away. I final

I have a BenQ TH671ST 1080p projector installed into my ceiling. I currently have an audio cord running from the projector to a less than optimal sound bar that isn't stereo. I have a Sonos AMP powering two outdoor speakers. I also want to power all my streaming through my Chromecast or Fire Stick. With this setup, is there a way to get great STEREO audio, with no lag, to either two Sonos speakers and/or a Sonos Sound Bar? What do I need to accomplish this and to set this up?

I have a Sonos Amp connected to 4 Sonos in wall architecture speakers in our living area. They sound amazing when playing music in the entire house. The problem is, the 4 speakers are pretty high up the wall, because we have an open floor plan. When watching TV the sound isn't great. Anyone have a recommendation on what we could do for better sound lower in the room when watching TV?I don't think we could add an Arc or Beam to the Amp and other 4 speakers. Any other options?

Hi allI’ve recently set up a new amp with existing in ceiling speakers and it works great. I’ve also connected the amp to a 2018 LG OLED via hdmi arc which pushes the sound out through the in ceiling speakers - also great.The issue I have it switching off the amp to return to playing the tv via a sky soundbox (also conducted to the tv via hdmi). This seems impossible to do, other than by physically unplugging the amp from the arc hdmi port on the tv.  I only occasionally play the tv through the in ceiling speakers but it would be nice to find a slicker solution than the above workaround.I have seen similar posts without a solution from a couple of years ago so I thought perhaps someone might now have found a fix.cheers.