Show off your setup or get inspired by others
Recently active
I would like the Sonos ARC to get some sort of EQ adjustment also a way of manually changing the centre channel output volume. I find this to be very useful on other soundbar set ups. For me the ARCs weakness is the dialogue it can be too quiet and hard to hear voices, you then turn volume up and the overall sound is too loud, a way of manually adjusting this would be great. Yes I have done triplet many time, used speech enhancement and latest software done many different adjustments and never been happy with it.so Sonos please give us this.
Hi community, I’m looking for a sonos setup for my living room. The room is rather large (15x20 feet) with 10 feet high ceilings. I would mainly stream Spotify and watch Netflix/Apple tv, most of the usage will probably be music. I’m not looking for immersive surround that will come from rear speakers, rather an esthetic setup for daily use that will support watching movies as well.I was thinking about:2x Era 100 1x Sub Mini or 1x Sub (Gen3) My concerns are:Will this setup fill the room? How will the connection to the TV work? Is it via Bluetooth? Will I have lips sync issues between the TV and the speakers of this setup? Should I consider replacing the 2x Era 100 with a soundbar? which one? Thanks!
Buonasera, vorrei acquistare il mio primo prodotto Sonos ( Era100) e volevo sapere se si può collegare alla TV via bluetooth senza bisogno della barra audio.Grazie
Are Sonos devices in a surround setup using dedicated wireless connections even if all devices are connected wired via Ethernet and WiFi is disabled in the settings?I am running a Sonos surround setup (arc, sub and two era300). All devices are connected to the home Gigabit network via dedicated Ethernet cables. WiFi is disabled in the Sub and Arc settings. The Eras are connected via Sonos Combo adapter. Everything works fine.Checking the web interface of the surround devices via port 1400 there are no ath0 entries in the ipconfig report.But I am still wondering if there is a wireless connection between the surround devices. Can someone from Sonos give a „official“ answer?
I have the Arc, Sub and Era 300 connected to my LG for surround cinema sound, would I notice the difference if I added Sonos Amp with a second sub?I love watching movies as close to cinema sound i can get on Sonos.
Hi All I have a very quick and simple question: Can I SWITCH OFF the Wifi and Bluetooth PERMANENTLY from my Sonos One? I am keen on using Sonos One connected to my Router via a Ethernet cable and also because I want to reduce the EMF Radiation in my Flat. Thanks in advance N
I would like music to start playing on three different speakers at the same time. Thought an alarm would be best, but, even though there is a grouped rooms option, it only goes off on one speaker. A few questions for you pros:What is the purpose of that “included grouped speakers” option if it does not play speakers grouped together? I have multiple groups, in which the same speakers are grouped. How does checking that option determine which of the speaker’s groups are triggered? Finally, if there is no way to make this work, would setting the same alarm (to Sirius XM) on multiple speakers seperately work?Thanks all! D
Hi. I'm a Sonus system newbie and new to the forum as well. I'm just looking for a little advice on the best state to leave a Sonus system in when it's not being used. We have a new home theater system consisting of an LG OLED tv, Sonos ARC, Sub & Era 100's for surround sound.My wife, or I, will very frequently use blue tooth headphones to watch tv so as not to disturber the other. In order to use the BT headphones I have disable both HDMI-CEC and eARC on the tv. With HDMI-CEC & eARC disabled the status LED on the Sub and Era's remain white as long as Sub Audio and Surround Audio are left enabled on the Sonos app. If I disable the Sub & Surround Audio on the Sonos app, the LED on both starts a slow green flash.I know a white LED means the device is powered and ready to use and the slow green flash just means the devise is disabled in the Sonos app. My question: is there a recommended state for the devices in when not in use? Does one state consume more power than the other
this could..i guess make some sense if i had the music was stored on a NAS or another PC on the network, but when i try to play locally stored Mp3 files from the very same PC, 80% of the time i get ‘an error occured the local>path>to>library>song.mp3 could tnot be found’. It gets even worse whe i try to play said music on the PC over network...but it does work 10% of the times. I reinstalled, reindexed, reset the router, firewall is fully allowing sonos service and client.
If I have the tv/sonos on all day by the evening I have to turn the volume up a lot.
I have an audio-technical AT-LP120-USB Direct-Drive Professional USB and Analog Turntable System. I’d like to find the correct Sonos component that will connect the turntable to my Sonos system. I have Sonos Immersive Set with Arc (Arc, sub and 2 Ones) for TV and streaming music audio in the living room; and Sonos Fives in our bedroom and den. The turntable (haven’t yet used) is on a shelf in the den, near power but not near the Sonos Five. I’m looking for a component that will allow the turntable to connect (and be an audio source) to the Sonos system via my WiFi network. The turntable has a cable with RCA-type L&R connectors and a female USB Type B socket. What is the best, and hopefully most economical, Sonos component that can connect the turntable output to my Sonos system via WiFi?
Hi - I’m planning a construction project in my house and part of it includes re-doing our TV area. It’s a small area - around 12’ x 8’. I’m thinking about doing a setup with an Arc, Sub, and 2 ceiling speakers for rear surround via AMP. I had a few questions about this setup.How would this zone be used if I want to listen to music on it instead of TV? Specifically w/ regards to the surrounds. Will the AMP for the surrounds and the SUB be linked to the ARC and act as one zone, whether for TV or music? Or is each component like a separate assignable room? I’m trying to figure out how to get this space to work best for both TV and music. How does the TV etc recognize the configuration for it’s output? Does it act like a 3.1 setup and use the source material mix? Or does it just come as a bitstream and Sonos does its own thing with the mix? If I need to have multiple inputs - i.e. a streamer, blu-ray, etc.. I assume they just all go into the TV and I use the TV inputs to switch back and fo
I’ve just received new speakers for my living room. 2 Era 100 and Sub Mini. Since before I have a ray connected to my TV because it turned out that the TV I bought a year ago had terrible sound. My use case for the new speakers is listening to music. Don’t care that much about surround sound for the TV but okey if it comes in the package without messing up sound quality for music. When installing the new speakers it ended up as a surround set up with the ray sound bar. As default when playing music it mainly used the ray and the Era speakers as some kind of “mood managers”. Not at all my intention. I want Era as stereopairs preferably without the ray in the mix at all. To improve the situation I’ve changed surround settings in two ways:Changed music setting to “Full” adjusted music level to +15It makes the system behave a bit more as expected and sound did improve, ray is still playing though. So I’m closer to what I’ve been after, but after playing around a bit with settings I’ve f
So how do that?
I have a spare connect:amo and am planning to use it to power some ceiling speakers in a bathroom (they will be the only speakers in the bathroom). Will the sonos sonance speakers work ok with the connect:amp? I believe I won’t be able to use trueplay with the connect:amp - how much does this matter with the sonance speakers. Would it make a huge big to upgrade from connect:amp to amp (an expence I would prefer to avoid if there is not much difference. Any replies/advice gratefully received.
If anyone is researching purchasing their Sonos Roam, I recommend getting the 3 year extended warranty Sonos offers.I purchased my Sonos Roam kit (2) in April of ‘23 and used them pretty often when outside enjoying the pool. I hadn’t used them recently during the winter months, but I did notice that my roams would disconnect, but still appear like they were playing. Then one day, nothing. I couldn’t reboot them, and they would constantly show an orange led charge light with no other responses.I contacted support and they said the device batteries were depleated and that I can return them for a 30% off coupon. 😆 You would think at least a 50% coupon would be justifiable here … but 30% it is.Luckily I have a credit card where I could submit a warranty extension replacement that covers an additional +1 year over the manufacturers warranty. Now i’ll be able to use my 30% coupon to purchase another set + the 3 year extension.I hope this new set has a better battery life. But hopefully you
Hello all of you…. I’m not gonna be seriously personal,but i need to give the reader’s some info.I had to “move” over to my 90 yo granny cause of changes in the family-situation. Granny does not hear so good,based on that i brought my Playbase over along with a couple of Ikea BS w/stands and my Sub mini. But granny did not like the Ikea speakers. And i have not any good place to put them. They are too noticable in Granny’s eyes.Anyway….the speakers i could have been interested to use is one Ikea Symfonisk Lamp and one Ikea BS but this setup is not available. But let’s say both of these speakers got the same drivers/amp this setup could be done. I get it that the inside volume is different,but that is possible with an prosessor read what they are paired with and adjust themself if so.There was allso an member here that wish for a Ikea Flower-lamp and a hanging lamp from the roof. This had been an alternative for us. A pair Sonos Roam/SL could allso been an alternative but they can’t be
I currently listen to my music (ripped from my old CDs) by sending it from iPad or iPhone to my Beam via AirPlay. If I bought an Era 300 and sent the music there instead, would there be a noticeable improvement in quality? Thanks.
HiDisclaimer:The following is not an everyday occurrence just once in a great while 😂This is not a hardware/software solution more aptly it’s a “try-it” to see if corrects the lip sync issue. It more so involves AV cable/stream viewing.After adjusting the Lip Sync in the Sonos app and still no Joy. Stop the AV stream either by turning the TV off or temporarily switching to another stream. I’ve found it fixes the issue 100% of the time when the Sonos app lip sync adjustment doesn’t correct the issue to my liking. I guess it resets the stream so to speak. So give it a try.. you have nothing to lose kind’a 😊 Note:You will most likely miss a portion of the AV Stream unless you can time shift to recover the missed portion.
Will I lose my current SONOS playlists and have to re-create them if I upgrade to a new SONOS speaker?
I am currently reshuffling my living room and was thinking of switching to Sonos.The initial reason is that I really enjoy the ERA 300 aesthetics, but I can’t figure out a rational configuration to suit my needs.In the same room, I would either :listen to the turntable. I wish to use a 2 speakers stereo configuration. watch tv through a projector (with HDMI arc)A pair of ERA 300 + a beam gen2 does not work, as the ERA would have to be configured as rear channels of the beam, and would not be usable as an entry point for the turntable.Then I thought to a Sonos Amp, able to deal with the turntable and the HDMI, but the Amp is not compatible with ERA 300. Is there any configuration that would make sense for my requirements ?
My play:1 fell and now has a lot of static.any suggestions for DIY repair? my system has a playbar, sub-gen2 and another play:1 for surrounds. What can I purchase to replace the poorly performing play:1?
I have a Sonos Playbar with two Play 1’s in surround mode, tied via optical cable to my Sony TV. When using the normal feed of Dish TV receiver via my TV, everything audio works just fine. But when I’m feeding streamed content via the Apple TV, I struggle to get sufficient volume going out of my Sonos surround. I found at one time, that resetting volume to zero with the Apple TV remote would get things going. Now it seems like the audio signal from the Apple TV is just weak.. and I have to separately crank up the Sonos volume with the TV remote volume control or my Sonos controller.Suggestions would be greatly appreciated.
Time was I could stream content from my Wolfgang’s Music account through my Sonos system… seems not longer. Anyone know why? David B.
Hi, my wife and I are building a new home and we have to make a decision on prewiring for surround sound. In our old home I prewired and had a wired Bose surround setup with a receiver. Our new home is open concept. Considering that, my initial thought is to set up the surround sound using Bluetooth or WiFi. I don’t want to have to plug in rear channel speakers and I would rather not pay for in wall wiring. I am hoping that there is a rechargeable option I have no issue with the front channels and sub being wired but again would prefer they not be. I am hoping that someone who knows more than me can give me some ideas/suggestions Thanks in advance for any help.
Already have an account? Login
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.