Answered

Will trueplay finally be supported on android with the launch of the s2 app?

Have two Sonia systems at two locations but wanted to take my Move between each location. It looks like I have to reset the move to get it to join the system at each location. SSID at each location is the same, not sure if that is the issue (but doubt it). Get a message saying that the Move is registered to a different system. Btw, both systems are in the same account. 

Hi all, hoping to som help.  I am a Newby so learning as I go here.   I have read the other post and they don’t seem to apply to me.   Just unboxed my pro-ject T1 SB, plugged in the R/W cable into the back of the turntable and then connected to the 3.5 converter into the back of my Play 5.  I have made sure all settings were set exactly to instructions.  When I play an album and connect to Line in I hear nothing but a buzz from the Play 5.     I do not get music from the turntable.  What am I doing wrong?   Thank you,   Greg

Since I installed the S2 app on my iPhone 11, I noticed my battery got drained rapidly.  See picture below:     The Screen Off is 54 min. meaning the Sonos S2 app is active in the background doing something...  I had no issue using the original Sonos app before. I have to swipe out manually the app to prevent the battery from draining. Anyone experiencing the same issue?

I have been unable to get my Tivo Bolt remote to control my Sonos Arc volume/mute functions.  I have unsuccessfully tried solutions for the Playbar.  Any help would be welcomed.  Thank you.

I've recently purchased a SONOS Beam and I'd like to add a couple of SONOS Ones to the mix for surround sound for watching movies and playing games etc. I'd ideally like to place the speakers in the top corners of my room (see circles marked in pic)  Anyone have any thoughts?  I obviously want a good sound but I'm unsure as to whether placing the speakers here will have any negative impact.  Audiophiles assemble!  

The volume on my remote is no longer working.  It was working and has just stopped.  I have tried 2 different articles to replace the remote and reprogram my shaw remote to relearn but neither have resolved my problem.  This is challenging for anyone to watch tv that doesnt have the sonos app available to them.

The CR100 controllers (which Sonos bricked) and two Connect’s that were replaced by Sonos under warranty (shipped back to Sonos) still show up as part of my Account>System here - but not on any of my Sonos Apps.  How do I remove these devices from the Sonos Account>System?

I have an ARC and have an existing B&W subwoofer and want to move to a 5.1 setup.  I’m also planning to buy a couple of One SL’s as surrounds but wondering if I can buy an Sonos Amp and use that as the .1 (with my B&W sub).  I’d rather not have to buy a Sonus sub

Hi folks, I have a few old Sonos devices that aren’t S2 compatible. After screaming “whyyyy” into the night for a while I’ve decided this may be an opportunity to adjust and streamline my setup. My two Play:5 Gen1s are a no brainier. The new Sonos Fives it is. Bye bye bridges (one still brand new in the box). Just switched the router cable from the bridge to the Playbase today and things seem to be working OK. In fact I think grouping/ungrouping rooms is a bit quicker. Maybe the bridge was a pinch point for some of the processing required. Or it’s just a notion of me. Anyway, I had the bridge on a shelf about 4 feet above the Playbase so hoping the SonosNet mesh holds up without it, especially with my outdoor plans. lastly, and the point for the post, I currently have a Connect AMP (ZP120, circa 2010) driving a pair of Monitor Audio Climate 50 speakers. I only purchased the ZP120 (2nd hand) and Speakers last July, which added to the level of screaming above. At the time I couldn’t just

Hi. Newbie here. I just bought a 2nd Gen Sonus One and I'm SOOOOOO disappointed. The sound is superb for such a small piece of kit but… the insanely high volume of Alexa's voice in relation to music means we simply can't bear to use Alexa at all, so we're just using the One as a mini speaker with no smart functionality.  What a waste.   I can see this is a problem for many people on here: if you turn the volume down so Alexa's voice isn't shaking the walls, then your music/content is inaudible. And if you play your music at an average volume, then Alexa can be heard at the end of the road!   It's so obvious that you should be able to control the level of Alexa’s (or Google Assistant's) voice seperately from the level of your music. But no.   I read an old post on here saying that new firmware in “May/June" would address this. June is nearly over… Does anyone have any info?   Thanks for any help.            

I purchased a Sonos Beam and found that it had wires to connect to either an ARC HDMI port or an optical digital audio output port on the TV,  My TV has only an audio digital RCA type port and the analog output ports.  Is there any way to connect using these ports - see image - If not, I will return the Beam. 

Does the newest Sonos update allow us to stream at cd-quality from the Amazon Music app or do we still need to use the Sonos app to do so? 

I like the look of the new Arc. Sonos seems to be catching up but they always seem to be a step behind. There doesn't seem to be a HDMI in for a Dolby Atmos device, like the Apple TV. I take it that means a lot of people will need to also buy a new TV, adding to the cost. Am I correct in thinking that my not that old Sony TV will not pass through Dolby Atmos over HDMI from my Apple TV as the TV is not Dolby Atmos even though the Apple TV is? I'm thinking a newer TV is also required with a newer HDMI port?

 I recently purchased 2 very nicely used gen 1 Play 5’s for my basement for $300 (US) for the pair. Did I make a mistake? My budget is limited. Should I sell the gen 1’s and buy 1 gen 3 Play 5 for $500? Do you recommend any other options? Thanks for your time, Rayskies  

I just recently purchased a SHIELD TV Pro. I've had my ARC since launch and everything has worked fine on all other sources (ATV 4K, Internal TV apps). I have my ARC connected via eARC to my LG GX. I'm not getting any system sounds, but I am getting sounds from Kodi. Other apps such as YouTube do not have any sound at all. I haven't messed with the audio settings on my SHIELD, but I don't see anything that would be symptomatic of causing only Kodi to initiate sound and not the other apps.  My only thought is that the LG GX recently updated to support LPCM through eARC and I know there are compatibility issues between the ARC and the eARC capable LG OLEDs. Any help would be appreciated!

Hi just replaced my living room playbase with the arc. I haven't had any problems previously but now anytime I'm watching TV the audio starts dropping out with a short static sound. Seems to be coming from the arc and rears. This happens while watching Netflix, prime, Vudu, and Plex. But does not happen if streaming tidal or yt music.    I have a Samsung q75 2018  Arc / gen 2 sub / 2 ones.  I use 2019 Nvidia shield to watch everything.  Shield to HDMI 1 on TV. Arc to hdmi4 arc port on TV.    I've looked at the network matrix and it's all green. But I don't know much else about that.    I have unifi network, I only have 1 Sonos hardwired.    Please help! Diag 778910189   I've rebooted my network and all Sonos a few times. Re-tuned a few times. Swapped cables. Made sure all firmware is up to date. 

Hello there. I’ve got a Sonos One updated to S2. I was thinking about getting a Tidal sub for the sound quality. I know there was talk of S2 including the new ability for Sonos speakers to play high fidelity streams.    Has that now happened? If I play a Tidal HiFi account through my Sonos One will I get the HiFi quality stream? Is that now live ?   Thanks for any help.

I have an Arc+Two Sonos SLs. My router is an ASUS RT-AC88U. I continue to receive errors connecting the devices in a surround sound setup.All firmware is up to date on router and Sonos devices. App is up to date. My connection quality is strong on all devices (40dbm) and I have played around with different frequencies and channels to reduce interference. Internet speeds are fine. I live in an apartment and aside from the 15 devices I have connected I have 10 available WiFi networks in range. So despite my efforts on picking an channel that is not congested, it still probably is. I ordered a boost but don’t feel like I should need it. Any suggestions?      

Hi ordered a Sonos ARC but then I’ve found stock in another store so now I wanted to cancel my order here in the website. However I can’t find any option to cancel it. I contacted Sonos support who told me to use the order confirmation email to make modifications to the order, but I never received that email… so as off today, I have no way to cancel the order. Seems a little bit odd. Anyone is facing the same problem?    

I purchased a play 5 for part. Turns out it’s recycled but the speakers work just fine. I understand the need to brick the software component of the speaker but is there any reason this can’t be used as a plain old “dumb speaker?” Seems like a total waste to make the speaker completely non functional.

The only issue noted with my Arc installation relates eARC settings. The LG C9 display has eARC capabilities. If "passthrough” is set to “on” and eARC is also "on” then the audio signal from the xfinity cable box persists on the Arc even after turning off the LG display. Since I don't have a need for eARC in my system, I can turn it off without a problem, but it feels like a bug. The Arc replaced a Beam in my system, and the Beam didn't have this problem.

I have a sonos Arc plus Sub, but i wish to know how is the experience with the surrounds, but im afraid i will left the feeling of the sound coming from left and right from the Arc soundbar, im very happy with the soundstage Arc produces, but i have not clear how the sound will be redirected to ssurrounds, they left Arc without the ambient feeling?.   any experiences?   thank you!

I download the S2 app, I did he installation and the I execute the app. I enter in the app, but I can not to do anything. The next picture shows the screen with the “use condition” but I cant to go the next step into the sonos setup. What is wrong???    

Hi there, I’m using my One to control Google Assistant and just got smart bulbs in the room, all *working* but the experience is far from great. The One will helpfully tell me that it’s turned on or off the lights... about 1 second after the lights have turned on/off. Google have resolved this issue when using Assistant through my phone, but the whole idea of the One was not needing my phone on me the whole time. (https://support.google.com/assistant/thread/890788?hl=en) Is there a setting or something I’ve missed to control this? The other part is please let us set the voice assistant response volume! I’m hoping we maybe see these changes in the S2 update already!?