Home theater

HiI see there’s other topics around this question, but none of them seem to solve my problem. Here’s the situation:I have a Samsung The Frame combined with a Playbar, Sub and 2x OneSL since a couple of years. My Samsung One remote has been working fine until a couple of days ago it just stopped working for changing volume. I’ve checked other topics and tried everything including powering off/on the Playbar, deleting and re-installing it, reinstalling the remote in the app etc. I’ve also tried this workaround: Hope someone will be able to help because it’s driving me insane at this point. Thanks!

Does this Soundbar allow Dolby Vision to pass through when connected by hdmi cable via eARC?

Are you freaking kidding me that these aren't compatible?

I am unable to add my newly acquired ERA 100 single speaker as a surround speaker to my existing Sonos ARC in the application. Why is this? The only option is to add the ERA 100 to another new room for example "living room 2". At the same time then the microphone from the ERA 100 is not able to use trueplay to tune both itself and the sonos arc. When watching TV the volume control does not work with the remote for both devices at the same time, but only for the arc. Is there any solution ? Or is the whole problem caused by the fact that it is one and not two ERA 100 speakers ?

I have a QLED TV with latest sonos ARC - what would be the benefits of adding an ERA 300 to that system?

Hi, I have an Intergra DRX-5.2 (works with sonos) with a sonos connect attached to the CD input. There is also several other speakers in the sonos system.  Recently the Connect has stopped switching ON the Integra. Sonos still plays through the receiver but i need to turn it on manually and select the CD input.All devices are hardwired. In the Works with Sonos settings menu of the Integra it lists connected device with the correct IP adres,Any suggestions

So I have a sonos beam and am going to buy a sonos sub Gen 3. but I *also* have an existing, fairly old, denon AVR and 5.1 surround sound system with ceiling speakers (but currently no sub).Most of the time I just use the beam because the ceiling speakers are right under the kids beds.but I do sometimes like to use the ceiling speakers instead, for watching movies with proper surround sound.what I was wondering is if there is any way to use the sub as the bass with the existing system, without the beam? Maybe with a sonos port but not quite sure how?the beam receives the exact same audio input as the AVR (via HDMI) so the sound data would already be inside the sonos system, if you get me. 

I have a Jensen Omni mesh LAN. When using Sonos Beam the TV stops and starts searching. The screen becomes unclear. 

Currently, I have Arc  + 2 Sonos One as rear speakers + Sub Woofer (Gen 3). I would like to buy 2 Era 300. CAn I use as front speakers and create Dolby+Atmos+ Surround effect. Pls. suggest. 

My setup is Arc + Sub x 2.  I just sold my 2 Ones as my rear surrounds and pre-ordered 2 Era 300s.  Will my shelves in these pictures disrupt the upward firing tweeters if one of my rear Era 300 is mounted on the rear wall?  Or is it not enough to worry about?  I saw something online saying if you have to mount <2 ft of the ceiling, to mount them upside down.  I can move these shelves relatively easily, if needed.*note, don’t mind the yoga mat and roller in the corner.  Those will be moved.  

Hello, I just wanted to see if anyone else has noticed the lack of any sort of sound from the front section/grill of the Era 300? I appreciate this might be expected but just wanted to check. 

Setup:  LG OLED65C2PUA (2022 model with eArc) with Sonos Beam 2; One SLs surrounds; and Sub Mini with Tivo (Android TV) Mini via 600 Mbps fiber optic.Problem:  While watching broadcast TV channels the audio on S2 now showing Stereo PCM or Dolby Digital Plus 2.0, and sometimes Dolby Multichannel PCM 2.0, but I used to get Dolby Digital Plus 5.1 before software update of the Tivo MiniI get Dolby Atmos and DD+ 5.1 while using Amazon Fire TV Stick 4K Max for streaming services

I just bought a Ray soundbar, the basic for a surround system with my TV. But I want good quality stereo while listening to Spotify and more volume capactiy together with better bass. I am undecided between purchasing two Sonos One speakers, the Era 300 or a subwoofer. does the Era 300 have a good woofer (bass) component/sound? And if I were to buy the sub mini woofer does that add volume capacity as well as better bass? Any other suggestions appreciated.

Hi, I currently have a Sonos One but we want to by a Sonos Beam for the TV. I want both of these speakers to play the same music at the same time using amazon music\Alexa. I also want the beam to be a TV speaker on its own for TV use when needed. Is it as simple as just grouping the 2 together in the app? At the moment when I ask an Alexa device (Echo) to play music, the default speaker is the Sonos. With 2 Sonos speakers grouped will this still work in the same way and just play through both beam and Sonos one?Thanks!

I am planning to purchase two era 100 speakers for stereo pairing with my Sonos beam gen 2. Is it possible to add one sonos era 300 speaker to this set up instead of a subwoofer to make it 5.1.2 home theater system. 

3 hours with Sonos support . Tried everything (fixed max address, changed wifi channel , unique 2,4 wifi band, ) nothing works . My Sonos arc that used to connect well does not connect anymore help . Desperate ☺️ nicolas 

I have two sonos speakers (Era 100) that I have hooked up for surround on my TV with a Beam (2nd Gen).  Is it possible to use the Eros 100 Pair of speakers to listen to music independent of the soundbar?

I am trying to set up a refurbished Ray. I have existing Sonos. The unit is not playing a chime and the PIN and there is no pin code on the back of the unit by the connectors. CS don’t have any further advice. I have done a reset. Please help! thanks. 

Please could someone kindly help.. regarding the Era300 wall mounts….are they suitable for rear wall position AND side wall positioning? From looking at the photos of them they look like rear wall only, unless of course there’s sufficient ‘swivel’ movement to still leave a 8” gap between the side edge of the speaker and the wall.thank you

I am continually frustrated by the lack of support for DTS HD /MA /X A lot of 4K releases have these audio soundtracks and Not Dolby Atmos and although I have the Sonos Flagship Arc I cannot enjoy these movies at their best because I get a message saying audio not supported which then causes me to choose a lower sounding option can you please provide an update so that I and many other users can enjoy our media at its best kind regards  Roger Stedman  

The ability to connect via AirPlay disappears (iPhone 12 pro). Only works for a while after connecting Beam to Wi-Fi, then disappears. Is it a faulty Wi-Fi setting or a defect in Sonos Beam? Everything works fine in the Sonos app.Sonos Beam 2 bought 3 days ago. 

I’m looking to create a new home cinema, but the screen will not be against a wall so I can’t use a sound bar. I was thinking to 2 Era 300s as rear speakers, a sub and wonder what people would recommend as front speakers on stands or wall mounted? Also, would I also need an Amp as well? Thanks

Tengo una sonos beam con dos sonos five traseras para cine en casa,  un par de días compré un tocadiscos y lo conecté a las sonos five sin embargo no detecta la entrada en línea, esto se debe a que las tengo configuradas como teatro en casa con la beam ?? Cómo podria realizar esta configuración ??

I can’t connect my Sonos one sl speakers to the ray soundbar as surround sound 

Hi Sonos, I hope ive got the right place but it's been about a year now I've done the surveys etc and I swear my speaker sets are too old. I play Bluetooth,  I play with line jack cable and also a stereo system. The first two methods are essentially a small pair of C Cell operated Sony 80s speakers designed for a walkman. For me, what is important is the Bluetooth and the line in. Stereo is also important as I grew up on mono and I don't like it. Maybe being spoiled with a B&o is the issue, but I also use cassette, minidisc and cd. The B&o I can record my vinyl to cassette or MD. I used to work in a TV shop and I'm kinda critical of kit be it for me or for the consumer. I was hoping I could beta test a device that I could attach all the devices I use and listen in stereo and in clarity. I have adapted my Sonys to accept Bluetooth by the means of a pcb and regulator - battery. Go buy one, but I have big expectations... Another notable piece of info is I was also a Beta tester fo