Troubleshoot, tune and get the most out of your system
Recently active
Hello. My sonos play 1 speaker is not connecting to my computer. This is odd, because it randomly disconnected. I tried resetting and rebooting it, but nothing worked. It would be great if I could hear about a way to fix it. Thank you.
I have an Echo Show 8 in my kitchen, set to play music through two Sonos speakers in the same Alexa room/group ("Kitchen"). In the Sonos app, I have a Playbar and Move 2 grouped together as "Kitchen." When I ask Alexa to play music, it starts playing and shows both speakers grouped in the Sonos app and playing music, but audio only comes from the Playbar, not the Move?Note: Alexa is not enabled on the Move 2, as I rely on the Echo Show for features like displaying video from my Ring cameras, useful when the doorbell rings etc. The Playbar obviously doesn’t inherently support Alexa due to its age.Moderator Note: Modified in accordance with the Community Code of Conduct.
When will u add more then 2 speakers sounds
Hi, I'm recreating this thread, as the discussion wasn't finished, but it was locked. I also wanted to make it obvious this is a Sonos issue, not a client environment issue. https://en.community.sonos.com/components-and-architectural-228999/connect-amp-keeps-dropping-out-audio-6885634/index2.html I've been following this for a while because I've been having the same issues, and when I spoke to support they said the connect amp can't cope with modern software and that I should upgrade to the amp, which is clearly unacceptable. This has been confirmed by people in that original thread who have been told the same thing. BillJanzen“FWIW, these issues seem to have occured after the June 2023 software update to S2 version 15.5. Interestingly, there is an alert posted in the release notes of the 15.6 update released July 25, 2023 about adjusting how older Sonos products use their internal memory. See below (copied from https://support.sonos.com/en-ca/article/release-notes-for-sonos-s2): Aler
I do realise that there is a chapter listing on the new Sonos app for my Audible books. However currently they seem to be non-functioning as when you tap the play button next to each chapter, the speaker just simply plays the audiobook where it left off or just keeps randomly changing from chapter to chapter without any real playback on the speaker. It would be great to get the chapter list playback up so that one doesn’t have to click the next button like 25 times just to get to chapter 26 from say chapter 1.
I've reset, and I know my wifi password is correct. The Play 1 speaker starts the set up normally, then automatically connects to a temporary wifi (even though i am already connect to mine on my device) then asks me to connect to my wifi and enter my password, but it can't connect. My device shows me still connected to the temporary wifi of sonos, when I try to switch to mine it says that it lost connection and ends the setup.
According to the SONOS service rep I can no longer use my Sonos5 as it will not update. I switched to Starlink as my Internet Service Provider and they claim they do not support sattelite ISP connections. This is total BS since every other streaming service we can pay for ie: Netflix, Amazon Prime, U-tube, Hulu, Disney, Paramount etc can stream via Starlink, but Sonos does not. One has to ask why, when every other streaming service can transmit/receive data packets via a fully licensed and valid ISP as Starlink is, but Sonos says they cannot support this service? No ratiional explanation can be offerred to refute why this cannot be remedied. So I now own a $700 doorstop?
My system contains: 1 BEAM2 MINI SUB3 SL 1004 ERA 300 (just purchased)Will all this work together? I have a small 1 bedroom home with extremely high ceilings. (24 ft ceilings in the LR)is this too much audio for my space?
I have been (happily) using Sonos for years with various WiFi routers, but recently change to Google Nest to increase WiFi coverage. In doing so, I have lost connection to my Sonos hardware (the Sonos app says “unable to connect”). Have followed the app trouble-shooting guide but still no connection. HAs anyone experienced this and/or got any suggestions?
How do I connect to Spotify
Problem: I have 2 x sonos play 3 and neither of them will factory reset. Having changed my router, I had to reset both, but they never went out of flashing amber light (no green!). Solution. Yes!, I finally connected the speakers, one by one, to the router using an ethernet cable. I made the reset procedure and wait...wait for at least 7 minutes, until green. Then, disconnected the ethernet cable and, after that, added to the system. In one case, an update was applied to the speaker.Great!: I have now both working again.
The latest “update” (or one of the many in the past three months my system has been idle out of utter frustration) doesn’t work. It recognizes Apple Music, allows me to scroll to and select the desired album, and when I select play, I get a spinning wheel of death. Then it wants me to connect to a Play 1….which I don’t and have never had. Where is that class action lawsuit?
Recently got an ultra and era 300s coming from Arc and Sonos ones. mostly do movie watching but on occasions like to play some music. Arc and ones sounded pretty good but I’m disappointed by the era 300s for music playback, find them very tinny sounding and don’t sound as good as the ones I had. Don’t quite understand why they sound so poor, for the cost of them I thought they would excel at all content thrown at them. I’ve tinkered with settings but of ended up setting them to ambient rather than full play back. Has anyone experience of this? Know why they are so poor.
Hello everyone !I apologize in advance for the translation which may be approximate.I purchased a Sony PS LX310 BT vinyl turntable, which I want to connect to my Sonos environment without connecting Bluetooth. I voluntarily bought a Sonos Era 100 in order to bridge the gap between the turntable and my Sonos environment (1 Playbase, 2 Sonos One in addition).I read on the Sonos site that a simple RCA female output (red and white tips) and a 3.5mm USB-C jack adapter are enough to detect the turntable on my Sonos Era 100. So I bought them. However, it is impossible for me to play my vinyl records because the local source (Line-in) is not detected on my Sonos application. I find myself very annoyed, I don't want to pay for an Amp. Have you ever had this problem or do you know how to resolve this problem?Thank you for your attention to my request.
All I want is to connect my pre-configured speakers to my new modem via WiFi without losing my existing SONOS setup. Unfortunately, whether I use the latest SONOS app or the older S1 version, my speakers are not discoverable on either my iPad or Samsung mobile device.After repeatedly trying the WiFi troubleshooting steps, the status lights were inconsistent—flashing white, which indicates it's either still booting or trying to connect to WiFi. I couldn't get the chime or the flashing orange status light during the connection process; instead, the setup would just stop and fail to find the speaker.The next step was to connect to my router via a LAN connection. Success, sort of. My system finally showed up in the SONOS app, and I waited an additional 5 minutes after the white status light became solid, just in case it was still updating the firmware. Unfortunately, when I placed the speaker back on the shelf and disconnected the LAN cable, the speaker was no longer discoverable, despite
All I want is to connect my pre-configured speakers to my new modem via WiFi (without losing my existing SONOS setup). Unfortunately, whether I use the latest SONOS app or the older S1 version, my speakers are not discoverable on either my iPad or Samsung mobile device.After repeatedly trying the WiFi troubleshooting steps, the status lights were inconsistent—flashing white, which indicates it's either still booting or trying to connect to WiFi. I couldn't get the chime or the flashing orange status light during the connection process; instead, the setup would just stop and fail to find the speaker.The next step was to connect to my router via a LAN connection. Success, sort of. My system finally showed up in the SONOS app, and I waited an additional 5 minutes after the white status light became solid, just in case it was still updating the firmware. Unfortunately, when I placed the speaker back on the shelf and disconnected the LAN cable, the speaker was no longer discoverable, despit
Upgraded to the latest version. Figured it couldn’t get any worse. I was wrong. Anyone else having issues with Deezer?I can navigate Deezer see my playlists, favourites etc. that’s all goodi can also see recent music played and searched for prior to the update and play that no problemwhat I can’t do is search Deezer. When I try and search for music I get results from other services but Deezer has a red exclamation mark next to it. When I click on this I get the message “An error occurred with Deezer. Try again later”I know it’s not my credentials or anything like that as I can still browse and play things from Deezer as explained above. The issue only occurs when I try and search new musicI’ve reauthorized the account but that made no difference. So if I want to listen to music now I need to use the Deezer app. Favourite the song or add music to a playlist just so I can then find it on the Sonos app.
Hello, I would like to purchase a Sonos product and if someone can help me with a discount code, thank you very much.
I don’t get the same results in the Sonos app when searching Storytel compared to the same search in the native Storytel app. I have also seen similar results with Spotify. Something can be found in the native music service app, but not when searching for the same thing through the Sonos app.E.g. I searched for an author in the Storytel app. I got 59 results. Searching for the same author in the Sonos app just gave me 38 results.I can of course “cast” from the native app to my Sonos system and start playing it that way. But the queue functionality is very limited when doing it this way and it is not possible to queue multiple things in this manner.
HiSo i got a new router yesterday and tried to set up my Sonos system again. But My playbar and sub wont connect. I can see both of Them in the app and when i try to set them Up it says preparing and then the message a problem occurd unplug and try again comes up.I've tried to factory reset them both but that doesnt help. And tried to use a cable between Them and the router too but that doesnt work either. Im wondering if anyone has any ideas or could provide any help on how to proceed.My 2 One SL installed without a hitch.
Hello,My rear one sl are in the living room and I would like to know if there is a Sonos voice command that could set on / off surround? So that we could have a nice diner while kids look at the tv :)thanks
Hi, I am looking to upgrade my TV to match up with my Arc Ultra and I wanted to make sure there are no issues connecting these two together. 2024 Sony Bravia 8 and the Arc Ultra. plan is to use the E-Arc connection as I have done before so I really don’t expect an issue, but thought I’d ask before I spend the money on the TV
I have a Sonos Ray connected to my tv and attached to the tv on a mount to hide all wires. I’d like to get a cd player to connect to the ray so I can enjoy the sound via the Sonos Ray. What are my options that don’t include purchasing a Sonos dock which is out of my price range? Is there any way to connect to my Sonos Ray via Bluetooth and avoid messy wires up to it? or use a blue ray player that plays CD’s and somehow mount that to the TV as well to avoid messy wires coming down from the TV to a player?
Hola estoy tratando de usar sonos play 3 sin cable de internet , se puede ? Además saber si puedo usarla en la TV sin barra de sonido Moderator Edit - Translation by Google:Hello, I am trying to use Sonos Play 3 without internet cable, is it possible? Also, know if I can use it on the TV without a sound bar?
I have an older SONOS setup using (2) Connect Amps on a 2.4 G wireless network that a few months back stopped working. I trouble shot the system cycling power to my Xfinity wireless router and I can see only (1) of the Connect Amps but, not both at the same time. I have used the “Search for Product” feature and it cannot find the other Connect Amp. I have reset my SONOS S1 App and still no luck. If I disconnect the (1) Connect Amp I can see on the App and connect (power) the other (1) Connect Amp, I can see that one. In other words they both work separately on my wireless network but, not together. Need help in solving this issue.
Already have an account? Login
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.