Skip to main content
Contributor I
Nov 24, 2024 1:28 PM UTC
Answered

Stereo Support for 3.5mm Audio In

I am aware of the support articels for Stereo Sound https://support.sonos.com/en-us/article/create-a-stereo-pair and connecting a line in audio source via the 3.5mm connector https://support.sonos.com/en-us/article/listen-to-your-turntable-on-sonos.

What these articels do not state is if the audio source is connected to one Stereo capable speaker (eg the Five via the 3.5mm line in) that both speakers will actually Stereo or if the other speaker will not play anything or only mono. 

Maybe I overlooked an article so any advice would be appreciated.

This topic has been closed for further comments. You can use the search bar to find a similar topic, or create a new one by clicking Create Topic at the top of the page.
nik9669aAnswer
Senior Virtuoso
Nov 24, 2024 1:33 PM UTC

Yes, a stereo source plugged into either of a stereo pair of Fives will play in stereo to both speakers. A different source could be plugged into the other Five too, and also play in stereo when selected. 

9 replies

nik9669aAnswer
Senior Virtuoso
Nov 24, 2024 1:33 PM UTC

Yes, a stereo source plugged into either of a stereo pair of Fives will play in stereo to both speakers. A different source could be plugged into the other Five too, and also play in stereo when selected. 

Translate
Nov 24, 2024 1:35 PM UTC

If you feed a stereo jack into one one of the speakers (preferably the left but either is OK) then a stereo pair will play in stereo as for any other stereo source.  Indeed, you could feed different sources into each of the lines-in and play either of them on any “room” in your Sonos system.

Translate
Senior Virtuoso
Nov 24, 2024 1:35 PM UTC

If you have other rooms, one source could play to that room too, whilst the other is in use by the stereo pair. 
​@John B beat me to this added note 😜

Translate
Nov 24, 2024 1:36 PM UTC

​@nik9669a beat me to it.  Must learn to type faster.  Or think faster.

Translate
Senior Virtuoso
Nov 24, 2024 1:37 PM UTC

​@nik9669a beat me to it.  Must learn to type faster.  Or think faster.

I didn’t emphasise a stereo cable with stereo jacks is needed, though. 😄

Translate
JBBNDEAuthor
Contributor I
Nov 24, 2024 2:02 PM UTC

...(preferably the left but either is OK) ...

Many thanks for ultra fast response. Highly appreciated. Quick follow-up question: Any reason why the left is preferred?

Translate
JBBNDEAuthor
Contributor I
Nov 24, 2024 2:25 PM UTC

​@nik9669a, ​@John B : And here is a follow-up question on stereo: In https://support.sonos.com/en-us/article/selecting-a-location-for-your-sonos-speakers it is stated: 

“A horizontal speaker will output stereo audio over a wide soundstage while a vertical speaker will output mono audio. When placing a single speaker, we recommend using a horizontal orientation.”

I would assume that when there is a pair of two in stereo mode this will not matter as inidcated in the 2nd sentence.

Translate
Senior Virtuoso
Nov 24, 2024 2:35 PM UTC

No: either orientation for a stereo pair, but vertical for a pair is more “conventional”. 

Translate
buzz
Grand Maestro
Nov 24, 2024 3:34 PM UTC

A Line-In is simply a network resource that can be selected for play on any combination of speakers. Note that a Line-In will not automatically play on its speaker — because Line-In is a generalized network resource that must be selected.

—

For the FIVE:

A single horizontal FIVE will play stereo.
A single vertical FIVE will play mono.

A horizontal pair of FIVE’s will play stereo with the level on the inside facing tweeters adjusted to improve stereo imaging.

A vertical pair of FIVE’s will play stereo.

—

For any pair of speakers the left speaker becomes the pair’s “Coordinator”. All network traffic for the pair flows through the Coordinator.

Translate