Troubleshoot, tune and get the most out of your system
Recently active
Hi, I recently purchased a Sonos Arc Ultra, a Sonos sub-mini, and two Sonos Era 300 speakers. Although I purchased them together , I had to wait for the Eras to be delivered. During that time, I set up the Arc with the sub, and it all sounded fantastic. I was really looking forward to the Eras arriving so I could set it all up as a Dolby Atmos sound surround system, obviously all in the same room. I have followed as many guides as I could regarding setting it all up. I realize that I must be watching films and music that support Dolby Atmos, I stream music from Spotify and Amazon Music, as I was looking forward to listening to music with this complete music system. I listen to music all day so it is an important aspect for me. On Amazon Music, while listening to an album being streamed in Dolby Atmos I can hear music some sound from the Eras, but very faintly. The same when playing a Blue Ray video in Dolby Atmos. I would like to hear far more from them. As for setup, I used the Sono
Era 300's neither in paired or surround mode, when playing Suddenly volume exploding
How easy is it to find someone locally who has enough Sonos experience to get the best sound performance from my Sonos equipment ?
Quick background. Watch movies maybe once a month if that. Cut the cable long ago. Had Amazon Fire Stick connected to Sharp HDTV using playbar, mini-sub and play:1’s for rear sound as home theater setup. Had worked flawlessly for 10 years. Fire Stick started acting up and lost TV audio thru playbar around same time at some point earlier this year. Assumed it was issue with Fire Stick. Finally purchased new Apple TV and was excited to set up but that quickly evaporated once I realized I was still not getting any audio from tv to playbar. Since the only physical connection is via optical cable I purchased a new one just in case. No matter what rabbit hole I went down I cannot get the Sonos app to recognize my optical cable. No settings on the tv have changed and if they had its a simple switch from fixed (internal speakers) to variable sound (external). This has consumed me for 2 weeks now and I’m at the point of giving up hope I plan to call support to see if they can help but am not
Hi everyone,I’ve been facing a frustrating issue with my Sonos Arc and am hoping for some advice.Here’s my setup:Multiple Sonos speakers at home, all connected via Sonosnet (Beam in the Master Bedroom, which is hardwired to my Orbi RBK760 router). My home theater system consists of a Sonos Arc, Sub 3, and 2 Sonos Ones as rears. All other speakers in the house, including the Sub and Ones in the home theater, connect and work fine – except for the Sonos Arc, which frequently drops connection.The problem:The Arc regularly loses connection, even though the Sub and Ones (located right next to the Arc) have no issues. When the Arc is disconnected, it often blinks white, and after restarting, it might alternate between white and red before (sometimes) reconnecting after multiple attempts. The nearest Sonos speaker to the home theater is about 8m away, if that matters.Things I’ve tried:Restarting the Arc (results are inconsistent). Ensuring the Sonosnet setup is working (since other speakers a
I moved from Texas to Florida and now I am setting everything back up. My ARC connected fine but sub not even detected.
I’ve been in the software industry for 50 years now. That’s a long time. A very long time. I have seen many applications, utilities, services, and products come and go. I have built many of them.This new SONOS Android app? One of the worst re-versionings I have ever seen. Two cardinal rules have been broken:Never release a product that is not fully baked. If you present functionality to your users that doesn’t actually work as the UI suggests it should, you will feel the wrath. Never release a version update that removes functionality from earlier versions without very, very good reason. Doing so, after setting the self-created standard, takes away a considerable amount of your goodwill you worked so hard to create.We all know how depressingly awful this new version is and how much has been lost in the process so I won’t belabor the painful details.I really just want to know what you, SONOS, are doing about it? This sub-standard garbage has been all we have had for way too many months
Can’t access my speaker through app since update
I am trying to help my mother figure out how to connect her turntable to her Sonos Arc. I am not a Sonos person myself and am not too familiar with the platform. Her Arc is connected to surround speakers and a sub woofer. She want to be able to listen to her old records nice and loud on the surround system and with lots of bass! But, I’m not sure this is possible based on the other posts I’ve read. I was thinking of getting the port and connecting the turntable (with an external preamp) to the port. Some posts seem to be saying that the line-in on the port will not allow her to play records through the full surround and other posts I’ve read said you just need to create a new speaker group in order to get the turntable to play through the arc and the surround system. Could another option be to connect a turntable to the Era 100 and then group that speaker with the Arc? Would that get the turntable to play through the full surround sound system?Thanks for the help!
Hi we are making a cinema room and was wondering if this set up will work 1 Sonos arc under the tv on a media wall2 sub on the floor in front 3 x2 wall architecture speakers in the wall at the back at ear level on the side walls and the amp, also does it work together having a Sonos amp and the rest of the speakers being connected to the tv ? we have the speaker cables ready where the wall speakers need to go is this easy to set up in the app as one room and link ?
Updated Sonos yesterday and now crossfade is broken.Has anyone else experienced this and do you know of any workarounds? Version 16.4.2Build: 81158074
My husband bought a Plex server. I added the sever on my Sonos App and all worked fine for one evening playing music. Now I go to access the sever on the Sonos app and it states "No Content Items Available". The server is working fine. I can see and play my music via the Plex app but Sonos all of a sudden cannot see the tracks/content.I am losing the will. I love my Sonos...or rather I did, as they've made things so hard to simply play and listen to music!!!Can anyone help me please? Thanks. Kelly
I have 2 “play five “ speakers in one room. The second one just stopped connecting. It’s still lit up. I’ve unplugged it, tried to rediscover it in the room and it’s not connecting or being seen. It worked over the summer. What should I do?
All iOS devices are unable to connect to the Move 2 via AirPlay, displaying the message: "Unable to connect to ‘Move 2’." All iOS devices can successfully play back audio on other Sonos speakers (e.g., Arc, SYMFONISK) via AirPlay. Music streaming services (Apple Music, YouTube Music, SoundCloud, etc.) can playback on the Move 2 through the Sonos app. All relevant software and firmware are up-to-date, including iOS, macOS, the Sonos app, Move 2 firmware, and router firmware. All Sonos devices have reserved internal IP addresses. The router settings have not been changed recently and the router has been rebooted multiple times. The Sonos app has been reinstalled. The Move 2 has been factory reset multiple times. After extensive diagnosis with a Sonos agent, the unit was replaced. Surprisingly, the replacement—a brand-new Move 2—shows the same error message: "Unable to connect to ‘Move 2’" after setup.Please help. What additional steps can be taken?iOSMac
Hi! i’m having this very frustrating problem after changing my isp and my home network. For 2 of my products this far, i set them up with the ethernet cable and make sure the « enable wifi » is on, but they still disappear like i have nothing when i unplug the ethernet cable. Any help with that would be much appreciated! I have three other products that will need setting up after those and I would like to stay in a good mood! 😅 Thanks!
Good morning, everyone. I could use your assistance. In brief, I added a Home Theater set-up to my existing system approximately 6 months ago (ARC, ERA 300 x 2, SUB, and Victrola Stream with SONOS capabilities). It has been successfully connected to my DECO MESH WiFi 6 system with little to no issues at all, until a couple of weeks ago. Nothing has changed with my current MESH WiFi setup or my Modem setup, with exception to the new “Updates” with the SONOS Mobile App. Initially, with the first upgrade, I was experiencing the same issues most of you have with the lag in the volume control. Annoying, yes… Usable, absolutely. However, I recently came home from a 2-week trip and noticed my Home Theater set-up was “Not Connected”. My other Play 1’s are still connected and able to stream. I have attempted almost all posted remedies to this issue, with no success. The only suggestion I have not attempted is to hardwire the ARC to my MESH router or directly to the Modem. Suggestions? A
According to thr support article from the Sonos below, the app (both Android and iOS) should have a function to put Arc Ultra into Bluetooth pairing mode. However, the latest version of the app on both platforms is MISSING the Bluetooth pairing function. How do we report this bug? Is there a form or official tracker? https://support.sonos.com/en-gb/article/pair-sonos-arc-ultra-with-bluetooth
I am unable to get SVC to recognize and perform any commands on the Sonos AMP. I have two ERA 100 and two ROAM 2 and one Sonos AMP. All of my ERA’s and ROAM have SVC enabled and this is where I am making my requests. The AMP is currently set up as “Basement”, and is usable within my APP and functions properly with groups when done within the APP. However, when making any requests to SVC regarding the Basement (AMP) it will not do anything. So, if I say “Play Jazz in the Basement” or “Group this with the Basement” or “Add Basement” or “Stop playing in Basement”, nothing will work. Any command specific to the basement will not work. The only thing SVC will do regarding the basement is play the AMP when I say “Play in the Entire House”. Has anyone else had this problem, what should I do?
Hello, I have:2x Era 1001x Sub Mini1x Rayand two inputApple TV (BT) and Sonos Line-in adapter for a gramophone If I have a group Ray + 2x Era + Sub mini then the Line-in adapter is not active If I have a group 2x Era + Sub mini then the Line-in adapter is ok, but he doesn't play Ray, because he is not in that group. For AppleTV, the output works in two groups and Apple TV works ok. Is there any way to have sound on Ray, when inputting from Line-in adapter? If I replace Ray with Beam, will it work? Thx
When using the Sonos App to stream Amazon Music, the Artists listing in My Music is incomplete. I can only access artists up to the letter P. The list beyond that point is truncated. I had read a previous thread here indicating that Amazon Music applies a container size limit of 500 items. This seems to imply that the truncation of my list is a condition imposed by Amazon. I take issue with this answer, since my Bose app contains the complete Amazon Music artist listing, and continues to readily follow my expansion of that list with no issues when I add new artists. Why not the Sonos app, as well? The previously suggested workaround of using the Amazon Music search function in the Sonos app is cumbersome and time consuming. It is far easier to scan through my private list to select files to play than to perform a search from memory. Why even use a selection list, if only half of my artist selections are readily available, and the other half I must recall from memory and then use a sear
I have just used my new Sonos ERA 100’s to listen to a previous BBC Radio broadcast of Sounds of the Sixties. The next time I asked Alexa to open BBC Sounds and play Sounds of the Sixties, it gets stuck in a loop of about 30 seconds whereupon it stops and repeats the same 30 seconds. It doesn’t matter if I ask BBC Sounds to play a different episode, every time I get the same 30 second loop. If I ask BBC Sounds to fast forward any amount, she replies that “I can’t do that”. I have tried re-booting the ERA 100’s and also tried un-installing the Alexa App and re-loading it. I can get BBC Sounds to play Radio 1 Anthems, but if I ask for Sounds of the Sixties, I just get the same 30 second loop.
When I select a record or a song in Tidal the system crash after 5 sec minimum and pass to the next song and continues doing the same.This only happen when I select music from Tidal, when I select Spotify it is normalI need and update?
How can I get TV sound to play simultaneously through my Arc system (Arc , One’s, Gen 2Sub) ?
So what I’m wondering is in the app when you have a the Era 100’s setup as surrounds for the Arc or Arc Ultra do you get settings to adjust surround and rear surround channels? Are they seen as just surrounds or surround and rear surrounds as well.On the Era 300’s I know you can adjust surround, rear surround and height channel volume.
I’ve had to uninstall the S2 app on my 2021 Motorola G phone as it just didnt work. This was a few months ago. I was thinking, ok Sonos developers screwed it up a bit, I’ll wait and try in a year. So should I try and see if it works now? Have they fixed it? Your thoughts?
Already have an account? Login
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.