Show off your setup or get inspired by others
Recently active
Hi. My Samsung remote has stopped turning the volume up on the tv. how do I remove it and re add it.
Recently installed a Beam 2. Paired with a couple of Ones for home theater. Realized Samsung TV no longer displays closed captions. I use a Firestick for streaming. Closed captions are enabled on both TV and Firestick. Any ideas if this is a Beam issue?Thanks.Larry Silvey
I have an existing set up of play:1,3, and one and symfonik. I got the symfonik so that I could use airplay with it and through the symfonik stream to the other Sonos throughout the house. now I have a xgimi home projector that supports sound through Bluetooth. What is the best way to stream to these other Sonos devices?
In my living room I currently have a stereo pair of Play5 for music. I'd like to add a Beam just for the TV. I'm also considering adding a sub. Is there any way to have the sub work with both the Play5s and the Beam depending on which is active? I'm assuming the answer is no, but I thought it would be worth asking.
I have read the thread on no Android integration for Trueplay, but I would hope spending 1500 on a system there would be a better solution than "borrow an iOS device from a friend"! Especially after3+ years!!! First thought, if it is a microphone issue, then standardize your system with 1 mic to calibrate your system with. Yamaha, Marantz, Denon, Pioneer etc ALL provide a setup mic with their systems. Microphones among iOS devices also differ, they are different from year to year and model to model. So that verbage doesn't add up or holdmuch water. Second, before the android bashing begins, I bet the cost of my system if the table was turned and it only worked on android and not iOS devices, there would be a loud outcry of Apple users, especially if told to go "borrow" an android from a friend. Not that this will change anything but I got to express my opinion. I'm the proud owner of a top-of-the-line Sonos system that is"Meh" at best.
Bonjour à tous la communauté.J'ai besoin de conseil svp.J'ai actuellement une sonos beam et deux sonos one sl en surround.Tout cet ensemble qd trouve sous ma TV pour la beam et derrière le canapé pour les deux sl.J'ai cependant un problème : lorsque je suis a table, nous aimons bien regarder les informations et malheureusement nous n'entendons pas super bien car celle ci n est pas dans l'axe des enceintes ce qui nous oblige a monter le volume assez fort et c'est parfois désagréable.Quel produit pourrais faire que je puisse "déporter" le son pour l'avoir proche de nous et ainsi éviter de monter le son.Merci de vos réponses et ou pistes.Cordialement.Flo.
Hi everyone. Hope you can help me, I have a small TV room with a gen 2 beam, sub mini & 2 era 100. I would like to add a Sonos arc but am worried that the room is too small, do I you think it would be OK? Many of thanks for all your help😀
Hola a todos!La pregunta o el problema es el siguiente:Es posible utilizar unos auriculares inalámbricos teniendo conectada la ARC al televisor mediante eARC?En la práctica sucede que puedo emparejar los auriculares pero creo que al estar conectada la television por eARC, no deja cambiar la salida de audio (ni al sonido de la TV, ni a los auriculares). Desde el menú de la TV puedo cambiar en manual la salida, pero al momento vuelve a coger la ARC.Hay manera de solucionar esto?Muchas gracias y saludos!!!
hi all. my 10 year old receiver just went belly up and it was suggested to me that Sonos product could double to serve as my “receiver”— just set up a new system using new Sonos product(s) but keeping my existing Fiber optics “cable” tv set box, Apple TV 4K, and Airply Apple Music (from max or iPhone) and my approximately 10 year old wall mounted tv. My internet fiber optic provider is the same as my fiber “cable TV” provider. I also want to get a turntable (not Sonos branded) soon. Later I might add small speakers in other rooms. I HDMI connect the receiver to Apple TV, to the flat screen tv on wall, to the router, and connect to the router as well. So recover is a wired hub. Bonus would be to be able to continue to use my 10 year old bookshelf plain old wired speakers with any now system—they connect with wires to my receiver. I’m not an audiophile so think average homeowner and not cheapest buy not the highest either. I want as much wireless connection as I can but my TV and
I'm currently using an arc and sub gen 3 with 2 Play 3 surrounds. I was considering replacing the Play 3s with Era 300s. Would I notice a significant improvement worthy of the cost? Is there more to Atmos than just hearing jets fly overhead?
So disappointed in Sonos. A brand new iteration of the Move is just announced, the Move 2 which they say has been “redesigned inside and out”, and it still can’t handle basic bluetooth stereo? How many hundreds if not thousands of threads have been created over the past few years on this topic asking Sonos to add this basic feature that ALL of their competitors offer at less than ½ the price? Don’t tell me it can’t be done, you’re fooling yourself if you believe that. This is a choice…one that completely ignores their customers requests.
I would like to have 9 Sonos Era 100 to a single network..Is this possible?
As Smart Home enthusiast i want to control my home by voice without the cloud. There are solutions like rhasspy (https://rhasspy.readthedocs.io/en/latest/) for this. But there is no out of the box Hardware like Sonos Speakers which can be used for input. To not reinventing the wheel for every solution of this kind a streaming server as option for voice assistants would be very helpfull. So each third party service can hookup this stream and do its thing with the audio.
Hi, I saw year old threads, with this topic. All have been closed. I’d like to bring it up again with a couple of questions and requests for discussion.I have two sites with Sonos speakers for serveral years. Extended over time, it’s a total of 24 speakers now. Given the rising energy prices (announcement from provider: 0,45 € cents with next increase), idle power consumption becomes more and more an issue. Play 1 consumes 3 W. Sub, Playbar and some older Play 5 considerably more. It sums up:3W * 24h * 365days = 26,2 kWh * 24 speakers = 630 kWh * € 0.45 = € 280/year.Just for keeping them in standby. I could buy a Play 1 per year for these totally unnecessary costs. My workaround: I power them all off with Wifi-Plugs (0,5 W each). Power on/off with some smart home event. One plug controls several speakers in a room, so power consumption is considerably less. When powered on, an IFTTT applet sets volume, groups speakers and plays a favorite. (With a 2 min delay for booting).Question: Any
This topic is older and might not have the most up to date information. Please click here to see a list of more topics around the same subject. I am using a Sonus ARC Sonus Sub TV: LG 65UN6955ZUFWhen I turn on the TV using the Streaming box (AT&T) remote which also controls my Sonus ARC, there is no sound from the Sonus ARC.I then to power everything down, and then power up. Then the sounds come from the Sonus ARC.I power down with the remote The following day I need to go through the same process to get sound out of the Sonus ARC. How can I fix this??
this Problem: port range check netsh int ipv4 show excludedportrange protocol=tcp shows it’s in a blocked port range (start 3371 end 3470) is an exclusion disabled Hyper-V ( dism.exe /Online /Disable-Feature:Microsoft-Hyper-V ) tried netsh int ipv4 add excludedportrange protocol=tcp startport=3410 numberofports=1 failed error message “Der Prozess kann nicht auf die Datei zugreifen, da sie von einem anderen Prozess verwendet wird.” (Port is used by a program) checking the port if it is used Get-Process -Id (Get-NetUDPEndpoint -LocalPort 3410).OwningProcess and Get-Process -Id (Get-NetTCPConnection -LocalPort 3410).OwningProcess failed error messages Get-NetUDPEndpoint: No MSFT_NetUDPEndpoint objects found with property 'LocalPort' equal to '3410'. Verify the value of the property and retry.Get-Process: Cannot bind argument to parameter 'Id' because it is null.Get-NetTCPConnection: No MSFT_NetTCPConnection objects found with property 'LocalPort' equal to '3410'. Verify the value of
I have an onkyo tx-rz830 and a connect. Trying to set the volume to pass through and it doesn’t control the onkyo volume / it acts as fixed on the preset level through the speakers. how do I set up the s1 app to control the onkyo volume? Is it the turn on volume? Preset volume? thanks
I am thinking of upgrading to the ERA 300 and would like to use it while traveling. My questions are if the bluetooth works well rather than buying a portable bluetooth speaker and, would there be any issues with using it while traveling and then coming home to where it has been set up?Thanks,Alan
Beam connected to Sony tv with optical cable2 S1 s set as surround.worked great with cable tv. Not so much with streaming services ( YouTube tv, Hulu…)can I set the beam and 2 speakers up to broadcast the tv audio?Thanks,
Hi many topics I read about the 32 devices limitI have an installation with 45 and I have all in the same account but I created a 2Vlan with different ip adress to a zone where I inserted 15 devices, this way when I m at that zone I can only acess those 15 devices and when I move to the other zone I can only acess the remaining devices. Problem is that if I’m at zone 1 playing music at room 1 and I move to zone 2 when I get there I connect to the network with different ip and the sonos APP automatically show the devices on that subnet but still showing the device that was playing before even if I stop the music before I leave, the app erase all devices not available except the one that was selected and I always get a message from error with a red dot on this device saying is not available, so I go to device settings and there is an option I can select to not show this device when it is offline and I select this option but it doesn’t t work, I go back to test and keeps appearing always
Hello everyone! I got me a single Era 300 and would like to know how you would compare it to Arc with music listening? Better, worse, same? I would like to update my passive stereo setup (2.1) to Arc to improve the sound when watching TV in my living room but the same stereo is being used for the music currently. I would prefer not to keep the stereo system for music only and would like to hear your opinions if Arc would be a good enough replacement for music also? I did try the Era 300 in front of the TV and listened to Dolby Atmos music. It didn’t sound that much of a surround but more like wide stereo with some sounds coming from above the speaker. Is the Arc better in creating a surround sound? Would you think that this experiment would give me any hint if the room is going to work for surround sound coming from single speaker? The room is not ideal but not the worst either. And by the way, the Era 300 is not going to be in the living room. It was just an expirement.I know I can tr
HelloI have a Sonos Arc, 2 One’s and a sub set up at home for all-round TV and music use. They are connected to an LG GX LED and Apple TV.I’ve had this set up now now for over a year but can’t for the life of me get to audio settings that I am happy with. Something always sounds off. If I compare it to listening to the same audio on my Airpods Max, everything always seems perfect and in balance with those and that’s what I am trying to get with my Sonos set-up.Can anyone advise on how to find the optimal settings for my own set up? Note: I already run trueplay every few months.Thanks in advance
It’s worth in 2024 or has Sonos in plans to release a Gen2 in the future?I think Center channel, eARC, Trueplay, etc… What do you think? Moderator edit: changed plane to plans for clarity
Hi Sonos community,I’m setting up a home audio system from scratch. I want it to support the following audio sources:online streaming audio (naturally) TV turntable CD playerI don’t have a receiver so i was looking at the Sonos Amp. This seems to be perfect for online streaming and TV but sadly has just one input (pair of RCAs) so I can connect a turntable or a CD player but not both.It looks like my options are:Buy a receiver and a Sonos Port and connect all the sources, including the Port, to the receiver. I’m a little cold on this as I’ve read some bad review about sound quality from the Port (e.g here and here). Buy a Sonos Amp and find a way to use the single input for both the CD player and the turntable, perhaps with a RCA switch (clumsy) or daisy-chaining the sources (is this even possible?).Any advice would be greatly appreciated. it seems like I’m not trying to do anything too strange here.Kind Regards,Matt
Looking to purchase first Sonos speakers this Spring. It’ll be strictly for music 20% in the living room, 20% dining room and 60% active in kitchen while cooking. There is power in every corner of the room. Will mostly be listening to things on low/medium volume and don’t want to be an obnoxious neighbor. Budget is ~$1,500. Renting house, so not willing to add something in the ceiling. (won’t attach pictures so you can ignore)
Already have an account? Login
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.