Answered

Every time I connect my headphones via bluetooth for a call on Google Meet the mic either just doesn’t work or my input audio cuts in and out for the first 5 minutes of the call. All the output audio is fine. I’ve checked both the settings in Google Meet and the system settings and everything looks fine. When I connect via USB it works fine. It’s very frustrating. Any ideas? 

I have an install with a Samsung TV, Arc ultra, sonos amp with 2 ceiling mounted surround speakers. I can use the rear speakers when playing through the Sonos app but no sound from the rear with TV usage. I thought I would hear surround sound. Thoughts/help appreciated

Hey allheres the go, I’ve got a Ray, Sonos 1 and play 3 that are all connected to the same network and running fine.  The issue I have is that the Ray is plugged via optical cable into the tv and when watching the TV if you want to play music elsewhere in the house on the play1 or 3 when you open the app and change the speaker, the tv playback disconnects.  Note, I am not grouping speakers. I am trying to play music on another speaker while the tv sound is playing.  Any suggestions on how to change speakers without disturbing others? cheers 

Recently my Sonos system started having major issues (suspect from an EERO update) where the speakers were slow to start, then would cut out and music volume would go up and down.   EERO says to connect all wireless which was my setup, but I went ahead and turned on SonosNet, and all issues stopped.   So I’m not setup opposite contrary to EERO recommendations.  Does anyone have insight into this?  I tried questioning on the EERO site and only get the recommendation to turn off SonosNet.

I'm Prakash. I'm having some trouble adding or removing a specific music service, like Apple Music, from my Sonos account. I've been trying to do it through the app, but it's not working as smoothly. Please share your ideas or suggestion with me. RegardsPrakash, Switzerland (Swiss) Moderator edit: removed full name and other unneeded details.

I have a Play:1 small Sonos speaker which I listen to constantly with the radio on.Several times a day at the moment, it goes suddenly silent and when I go into the Sonos app on my phone, it says Sonos cannot connect to the speaker. Typically aftrer a few seconds or minutes, it reappears in the app and I can press Play to get it to start playing again.This speaker is unusual on my network because it’s a newer bluetooth-enabled one. My other Sonos speakers are older (10+ years, I think).It’s extremely annoying that it keeps disconnecting. How can I troubleshoot this problem? I’m no kind of wifi or router expert so I’ll need things explained in simple language please.My WiFi system is an Aginet TP-Link mesh router that I can see via an Aginet app on my phone. In this app I can see the speaker listed, but it keeps appearing and disappearing. It actually disappears in the app far more often than it goes silent. For instance just now it was happily playing the radio, but it wasn’t listed in

Sonos S1siPad Pro OS 18.6.2iPhone 16 OS 18.6.2Linksys Velop Mesh network (Nodes: MX5500GC x 2  , WHW03, WHW03CF, WHW01)I had this multiple times, periodically one device usually iPhone will lose connectivity to the Sonos install. Today I managed to get it to find it by forgetting the network and rejoining it; simple as that! It has been bugging me for months. I use a Linksys Velop mesh network, and Sonos is on the 5gHz separated network (2.4 and 5 gHz have different SSIDs). I guess it could mean that the specific node that Sonos is on was different from the iPhone, maybe the mesh does not broadcast the settings effectively across all nodes???

I have a Cambridge Audio AX C25 which I have connected to an Era 100. I am connecting via an official Sonos line-in converter and a brand new rca cable. When I play a brand new disc, the sound is all distorted. i have also tried using a passive volume control and also a preamp but the distortion remains. Also I have adjusted the line-in levels and this makes no difference. Im out of ideas on what to try next. 

Hi everyone,I needed to change my network router as we have a new TP Link Deco mesh system.This required me to set up my Sonos network again.I set up my Playbar, Play 1 and Synfonisk speaker on the same Sonos system using the S1 app.So far so good.I then wanted to set up my Roam speaker. So I used the new Sonos app for this, and set up a new system as the S1 isn’t compatible with this speaker.I then (foolishly) decided that I wanted to add my Play 1 speaker to the same system as the Roam, as the Play 1 is compatible with the S1 and new Sonos apps. So I went through the upgrade process for the Play 1 and added it to the system associated with the new Sonos app.Then I realised this actually wasn’t what I really wanted after all.I therefore followed the ‘downgrade’ process in the new Sonos app, and downgraded the Play 1 to be compatible with the S1 app again.However, I can’t now add it into the S1 app as I keep getting the same ‘Sonos app needs updating’ message that other people have men

Will the case ever be available to purchase online? Seems really weird that we pay a premium for these headphones and yet there’s no option to purchase the case? I travel for work weekly to various cities and countries, and this is the second time I’ve left the case on a plane. I know it’s my fault. I have no problem purchasing a new case, but I can’t as they aren’t being sold.  I did contact customer support, haven’t had a response to my latest email which I sent last week. Can anyone please recommend a case which fits the headphones but also isn’t breaking the bank, as I will undoubtedly leave it on a plane again in the future! (sorry for the typo in the title)

Anyone else having issues with volume. Sometimes I have to set volume to 84 just to hear faint sound???   

So, i installed qobuzz app on my Hisense android tv. The tv is connected to my sonos arc by hdmi / e-arc.  when i did that, the TV up in my desktop/phone as a qobuz connect device (in addition to tv w/ google cast). and i am able to play on my sonos speaker through the “tv” connect. We know that Qobuz cannot connect to Sonos devices directly. (please!) The TV and the qobuz app says hi res music when playing on the Tv app. It plays through the Sonos Arc fine and sounds great.  Now, on the sonos app nothing is displayed as music or anything qobuz or controllable music for that speaker, as its says its gray TV Audio / HDMI / stereo PCM. As if the tv is playing audio.  How confident can i be that Sonos speaker is actually receiving and playing hi res audio from Qobuz android tv? Want to make sure the Sonos speaker is not downsampling it somehow.  I know i can control Qobuz from the Sonos app (its installed) but the Sonos app is not great to use, and it does not connect/sync with the Qobuz

In moving, there is a black clip in back of sonos in optical hole that connects to the cable. In that hole is a black piece of plastic I think responsible for a tight connection.  Mine broke and need repair.  Best Buy and a few other sources say send back to Sonos and they can help. Anyone have this issue before? Is this monitored by their team? How do I get touch with them if they dont reply here?

How come my Sonos app says that my two speakers and sub are not connected but I CAN play Spotify through them through the Spotify app ??

Sinne last update beam gen 2 mute à LOT.also when not connected to anything but streamingincrease volume helps 1 second and then muterebot of soundbar does not helpsomeone got any idea?

Until recently my music folder was fully accessible, but now I have no access to the folder unless I switch off the Private network Firewall.This seems to have happen following a controller update.The Sonos Desktop controller and Library service have both been allowed in the firewall settings, but unless the firewall is switched off the library is unavailable.I have restored the Firewall to default settings and let the Sonos controller request the  changes it wants but that has not helped.What other actions are required to enable the controller to see the library which is in the music folder on the same PC.  Sonos is no longer a friendly system to use. I really shouldn’t need a degree in computing to be able to use Sonos products.Any help would be welcome 

I set 1 alarm on my Sonos Port. On at 10:30am, off at 9:00pm. Lately it just makes the chime/bong sound and I have to log into it to tell it to play the music I selected. This shouldn’t be something I have to check daily.

Can't find the equaliser in the app for arc ultra 

Hello,My Beam gen2 soundbar plays the sound of a TV program for about twenty seconds even though my TV is off ?! This happens almost every day and at any time of the day or night. How can I fix this problem please?Thanks a lot for any help !Regards

Hello guys, I am a mariner and so I stay on ships mostly where internet connectivity is very less. We do have internet onboard but its via satellite and the speed is not at all good.I was looking for a sonos system and the best buy sales person advised me to get sonos five, and he misinformed me that this speaker is Bluetooth compatible, I came onboard and the first thing hit me that it doesn’t have Bluetooth.We sailed out from the port and I could not do anything about it.I could set up the system with my iOS device making another android phone as hotspot wifi. All was good until I had internet signal on my android device. I did all the setup, also saved the EQ as per my taste. After we went out to sea, we lost telecom signal, then my system was not showing on the sonos app. I connected the system to onboard wifi, and there was an update to the sonos app. I updated the application.After update, still no system… somehow after hours of hit and try I could get the system on the app. (thi

My Arc Ultra works fine, but then when adding additional speakers/different room/or a group it goes silent with TV audio. Works as surrounds but I'm using them for multi rooms. Worked the first night I used it. Music works fine for all. No TV audio for all, just arc. Any suggestions?

I have an older system with a Bridge that just failed due to a bad power source. My speakers are in the walls and I can't connect them directly to the router. Should I buy a Boost if possible or see if I can find a new power source for the Bridge and get a few more years out of it? Thanks

I purchased and installed a home theater system with a Beam Gen 2, Sub Mini, and (2) ERA300 surrounds. After installation I encountered persistent issues with streaming music from within the Sonos app using Apple Music and Amazon Music. I made several calls to Sonos support and allowed a support person to connect into my network and run tests on the Beam Gen 2. No matter what we tried the issue persisted. I've put this together so that if others are having this issue they may benefit from my endeavors and perhaps offer some help !Here is what I experienced within the Sonos app, so much so that it is unable for streaming music.Message: Couldn't play AAA. The connection to Apple Music was lost. Message: Couldn't play AAA. It's not encoded correctly. Pauses, and skips while playing music.So, after hours for frustration here is what I did ----->The Sonos app:Remove ALL speakers from my system. Settings -> General Settings -> Forget Current System. Account -> App Preferences -&g

1 of my Era 300 speakers will no longer connect to wi-fi. I press the button on the back. Light continues blinking white. Never turns blue. I have unplugged . Updated all Sonos products. 1 speaker will not connect.

Where do I start if I moved into a house that has everything left from the previous owner?