Fix & Optimize

Mon frere qui vie chez moi a acheté un donos beam.Etant déjà propriétaire dun compte sonos il s'est créé un compte avec son courriel. Mais il apparaît sur mon compte et est incapable d'être seul sur son compte.  Comment faire pour avoir 2 compte distinc et indépendant ?

How do I connect a Sonos 3 speaker to a Brennan B2?

My TV sound (through a DAC converter) shows in my Sonos system as a source (Line-in), and when pressed it does show a signal (signal symbol fluctuates), but no sound comes. This has worked in the past but has stopped working some time ago. I have tried a lot (swap optical cable, power resets, adjust settings in app) but nothing works. When removed the Line-In source disappears so it is evident that it is correctly connected. Any tips??

Hi all. Recently my Move 2 takes about 90 secs for trueplay to kick in and it seems to be drastically altering the sound everytime it kicks in subsequently after this. I know it has active trueplay however the speaker is in the same location and will go significantly louder everytime it trueplays. Anyone else having this issue? It never used to do it and was perfect before.I have not done a factory reset as yet ThanksAdey

Hi, I have Gen 2, sub mini and 2 era 100s. all working perfectly. I have in principle from ‘she’ permission to have ceiling speakers but I’ve read that I cannot add ceiling speakers to my system. is this correct? 

We have had Sonos speakers for several years, but we keep losing connectivity and have to reset everything. We have a Google mesh system throughout the house, so WiFi is not the issue. We are ready to throw it all out, it’s a horrible experience. How do we fix this?

I have arc ultra and two new ERA 300s. Sound is amazing for music from Spotify, but extremely low volume with DirectV. Very frustrating.

Can two headphone users listen to the same TV at the same time?

Hi all. Ive just got my new era 300s. Ive taken the old one sl's off the room on the app but am i best deleting and reinstalling the app before setting up the era 300s? Thank you

Hello, Just bought a Sonos Arc and found out that one of the streaming services on my Android TV provides home theater sound in AAC 5.1. After fiddling with the setup and looking on the Internet, I found that Sonos does not support AAC 5.1, and it is downmixed to PCM 2.0. Some questions:1-  Are there any suggestions how to get AC3 to Sonos Arc? I’m now using an Android player capable of software transcoding AAC 5.1 to AC3, but it’s not an ideal solution. Maybe there are hardware transcoders capable of the task? Or a system-level utility for Android? Or maybe some TVs are capable of such transcoding? The only one that was suggested up to now is to use Nvidia Shield, which is told to be capable of transcoding everything to AC3. Surely something else can then do it as well?2- What is the reason for Sonos to not support this format? Is there a chance we would get support at a later stage? Thank you in advance!

My Playbar worked great yesterday. I've had it for 9 years. Today bam! No sound. Nothing happened. Everything else plugged into the same surge protector is fine. But when I contacted customer service and troubleshoot it. The only solution they can offer is buy something new. They did offer me 15% off the to upgrade.  I paid almost $800 for that it should last longer than that or the warranty should last a lot longer than 24 months.  Does anyone know somewhere that can repair it?

Just received the Sonos “Immersive Set with Beam” couldn’t wait to get it up and running. I’m in my 70s so please reply slowly…. Over the years I’ve had several systems that always allowed me to set a baseline volume level for each speaker in a surround sound configuration. I spent about 4 hours this afternoon on the Sonos App and no such luck.  I remember reading a blog about placing each ERA100 in its own room and going that route, with that, I was able to set the volume of each speaker but not able to save it when done.  Was hoping for the ability to save those settings that would stay proportional increased or decreased the grouping volume.  I though perhaps the “Zone” function would do that but didn’t have any luck.  Any help would be appreciated.

Hi all,I’m helping my friends get their Sonos system setup.  They have an Arc Ultra and Sub 4 hooked up to their TV, two Era 100s in a separate room, and a Move.  Ideally, when they listen to music, they would like for it to play through all of the speakers, but when they watch TV, that would exclusively play through the Arc Ultra and Sub 4. Of course, they could manually add and remove speakers through the app depending on what they’re listening to, but that would be annoying to do that multiple times a day. It seems like there must be a way to set it so that the default for playback from the TV is through the Arc Ultra, and the default for listening to music is through all of the speakers, but I cannot figure out how to make that happen. thanks!Ben

Hi there, just hoping to give this a bump since it has been a few months without an update to the app that might resolve this. Here is the relevant post in pour previous thread (unfortunately closed for inactivity): As of today we are still seeing a ?? for the CFBundleShortVersionString with the latest version as available via https://www.sonos.com/redir/controller_software_mac (“Sonos_57.22-67080.dmg”):Latets Sonos S1 App showing ?? for Version string  

Hi!  Does anyone know if Sonos will ever implement the ability to save volume settings? I balance out speakers throughout the house and then someone uses it making all speakers the same level.   Additionally, the ability to have custom presets for the volume would be ideal - Dance Party, Background music, etc., where there are different expectations and volume balance between each speaker and room.  This would be easy enough to implement even if it’s a locally stored settings file.  Oldest post I found bout this is seven years old, and there are hundreds of others, so clearly not a priority even though it’s a whole home system. Thoughts?

This could not be a simpler scenario that I’ve ran into massive problems trying to solve. I have a Sonos Move (gen 1) pair set up on my home wireless. Everything works great.I want to connect that pair to a new network. Both wireless networks are active, so I want to temporarily switch them. I want to “tell” the two moves to reconnect to the new network. I want to do this without factory resetting the two Moves.I have my phone and it’s connected to my new network. What do I do?

Hie everyoneI have a TV samsung, no 3.5 jack nor Bluethoot, it has HDMI arc and Optical audio, I have Era 300, I tried an adapter USCB-C to HDMI, it does not works, any idea how to sent audio from TV to Era 300?

Peut-on utiliser le sonos Era 300 uniquement en Bluetooth si le wifi de ma box internet est en panne?puis-je l’utiliser en Bluetooth si je la place chez un ami, pour la soirée ?

Can you control sonos from more than one phone?

When I look at the albums now in my library and the album has multiple artists it is split into many entries in the display. Effectively making the album view useless at it is not possible to play one album with multiple artists (and it it not reasonable to try and make hundreds of play lists one for each album manually).This is not how the album view worked in the old app :(

my Sonos has become so glitchy. It is almost unusable. It goes in and out all the time. Sometimes I get three songs in a row with no problem sometimes I can’t get one song in a row with no problems sometimes certain connect amps sync up sometimes times they don’t I’ve reset routers. I’ve unplugged all the systems. I’ve been having this problem that keeps getting worse. I have six Sonos connect amps a Sonos move and two Sonos play bars. Please help me 

I tried multiple times now to connect my 2 seperate Roams to the S2 app but cannot see them in the app. I have reinstalled factory settings on both. I have eloaded/re-installed the S2 app. I have pressed the power button as described in the support but nothing works. Pls support!

Hi everyoneRadio France's FIP radio links load ok using the Sonos app on an iPhone, but have stopped loading on an Android phone. Disconnecting/reconnecting Radio France to/from the app makes no difference, nor does clearing the cache of the app or a reboot of the phone.I am trying to avoid reinstalling the app because I want to retain the data for my system's setup.Any ideas anyone please?

Hello Everyone,I woke up today to find that my Mac Controller could no longer find my Sonos system. I reset Sonos Boost, router and the Mac controller but no luck.  System error says router is not in range and it is right next to my Mac. Is anybody aware of anything going on or have suggestions on how to resolve? I did notice an update to 26.1 of Sequoia as I was heading out the door today and perhaps that will resolve.  I am not sure if related, but I also noticed issues recently with my Mac and sites that use javascript. Perhaps all related? Thanks all in advance. 

Hello,I am using Sonos Ace in my business PC for business calls through teams.I am experiencing issues when I am in a teams meeting, I lose WIFI connectivity and Bluetooth connectivity.The network card in device manager has a caution triangle indicator and I need to re-install the driver every time. This happens 2-3 times every day.Could you please advice for troubleshooting this issue?I do not know if it is a driver issue from Intel but I do not have any problems when I connect my previous Bluetooth headphones