Fix & Optimize

I have 2 ERA 100 speakers, one in the master bedroom and one in the master bath. The WiFi is an original eero Pro configuration in bridge mode, with DNS/DHCP provided by a Linux server. The ERA 100s have been working great in this configuration for 2 years. Recently, however, the one in the master bath is no longer on WiFi, nor was it visible in the Sonos app.After resetting the device a couple of times I powered down ALL Sonos speakers (6 Shadow SLs, an Arc and a Playbar among them) and powered off ALL the eero Pro devices. I then brought the eero network back up and then re-powered all the Sonos devices, doing the ERA 100s last.ALL the speakers came back online problem-free EXCEPT the ERA 100s. I just went through the reset procedure on the master bedroom ERA 100 and the behavior is the same: The speaker comes online, I can see it get an IP address from my DHCP server. However, within a minute it drops off the network, never to be seen again.So, both of my ERA 100s are offline and lo

Last month I updated from an old Playbase to a new Arc Ultra. In my area we have unexpectedly had three power outages in the last month. After each outage when the power is restored the Arc Ultra has a blinking green or white light, and I have had to reset the bar from the factory settings all over again - three times. I have the power cord plugged into a surge suppressor. Is this normal behavior? There is no settings memory on this product?

I can’t finish the setup on my new era 100. It seemed to connect to my WiFi ok or it has found it on my WiFi easy enough but this has come up each time I’ve tried 

reconnecting tv sound on my soundbar  after having playede a song from spotify is not working. i have to restart the system. my konfiguration consist of 3 play:1 and 1 soundbar optical connected the soundbar is named " stue" connected to 2 play:1 as  surround.But as described I cant reach the tv setup

My Move 2 speaker seems to have weaker output from one of the channels. Has anyone else experienced this ? It has just started happening recently. 

I downloaded the Sonos app on my desktop Windows 11 PC, and successfully added a music folder, which is on a secondary internal hard disk of the computer. Windows sees the disk as D:I then noticed that the Sonos app was offering an update, and I installed it.After that, the shared folders on both my Windows PCs were showing as inaccessable. I removed the shared folder on my desktop, and then I was unable to re-add it. I tried various ways, and got various errors. Sometimes it would re-add, but then it became inaccessable during the indexing process.What to do?

Hinewbie here I have a gen 2 connected to my TV can I add my era 300 to it, struggling to do it. Thanks Gary

Hiya, can anyone advise how to connect Sonos ARC ultra to a projector that only has HDMI to get the most out of the soundbar, I currently have a PlayBase and Mini Sub connected to said projector.Looking online apparently something called a matrix splitter is recommended but it’s as clear as mud, I’ll be wanting to connect a SKY Q 2TB box to hopefully get the full Dolby Atmos experience.  Many thanks in advance

How do I turn off Sonos Voice Assistant on a Ray?

I am aware this feature request has been raised many times in the past, but the threads I found are now closed to further comments, so I am posting a new one here.I recently bought a Sonos Era 100 and I have been loving it so far. One enhancement I would really love to see, though, is more consistent loudness between tracks when listening to Spotify (especially playlists and shuffle).For reference, I also use a WiiM Pro streamer to listen to Spotify. WiiM added a toggle to enable/disable Spotify volume normalization in 2025 (*1), and it significantly improved the listening experience. As much as I love my Sonos, WiiM remains my go-to streamer when I need consistent loudness and don't want to keep manually adjusting the volume for each track that’s too quiet or too loud. I would love Sonos to offer feature parity here so the Sonos experience remains fully competitive.What I am requesting:Please provide a user-facing option for volume normalization when using Spotify Connect on Sonos (or

Hello, my system is Beam Gen 2 with a pair of One SL's as a stereo pair with a mini sub. Also a standalone One. Recently added an Era 100.I can connect my turntable ( which has a pre amp) via Bluetooth to the Era 100 and add in the One but cannot add in the remaining system. I can using the app but it doesn't group everything whenever I use the turntable.I want to use the Beam and stereo One's for watching the TV and then automatically use all speakers when playing vinyl, is that possible?Previously I was using a Connect box via line in to the turntable but it was a bit hit and miss although did auto play and use all the speakers but not every time. 

I’ve had my Sonos connect and play 1 for years with no issues on Virgin broadband. I’ve just had a new router that looks identical to the old one but it can’t detect on Wi-Fi. It will play with an Ethernet connection but still can’t find  the Sonos to update the Wi-Fi. As soon as the ethernet cable is unplugged, it loses connection (obviously).  Anyone else had this problem? Might it be different software in the replacement router..

I have a gen 2 beam paired with a Era 300. During playback from my hisense TV I occasionally get a popping sound from the Era 300. Has anyone else had this issue?

Is anyone else having problems with Deezer in Australia attaching the service to their Sonos account ?

When I go to play Spotify on my era 100 I press the play button and it's skips through song like you are mashing the skip button. It stops after 10 seconds then will just not play any sound but is playing the song. Within the sonos app it also does this but instead afterwards it just don't not play, as it the play button does nothing. I have a strong internet connection, I've reset the speaker, reinstalled both Spotify and the sonos app. I've restarted my router. I've re linked the Spotify app to sonos. I am stumped.

I have a Roam SL.  I am considering getting another Roam to form a stereo pair.  But I see that I can’t order SL now and Roam 2 is all I get.  Can Roam SL + Roam 2 form a stereo pair?

I have a Play:5. Setting up a new account, on a different iPhone. I keep getting the “Unable to create Sonos account” error. I’ve rest everything, still unable to create new account.

My Arc Ultra had very tinny sound. Like an old AM radio. I had Geek Squad install my TV. They heard the ARC and said some of its speakers were not working and told me to return it.  The second ARC was marginally better. Frankly, my Beam soundbar has richer, deeper sound.  Sonos support barely spoke English and was useless. I have too many Sonos products to go back to Bose, but I am tempted to return the Arc and start over. 

An S2 system that’s been working fine off the same Synology NAS for years. No network changes. Sonos reports that it can’t read the music files from the NAS share. Rebooted all round (inc network router) and readded the Music Library share. Connects ok, indexes all the files (Library contents are fine), but trying to play a track gives a file access error. I’m baffled. 

Hi my sub has stopped working. It’s a gen 3. Model s26. S/n [redacted]pin. 037-52-006is it’s still under warranty ? If not could it be fixed  Moderator Edit: Serial Number recorded and removed

Tv sound all of a sudden stopped playing through Beam. Tried all advice on here and settings still not work. It’s connected HDMI from beam to HDMI ARC on tv. Also Alexi stopped answering and playing tone.

So tired that my SONOS system always have an issue.  Have 25 devices and update. But there is always an issue. Moderator Note: Modified in accordance with the Community Code of Conduct.

Does anyone else constantly have problems with their Sonos system disconnecting and constantly have to update network and is there a way to fix this?

I had 2 play:3s using S2 and ditched the bridge when I updated to S2 (years ago). One of my play 3:s died. I tossed it and purchased a used play 3 on ebay. Just received it, plugged it in and went to the app to add it but it never finds it. The white light flashes for about a minute and then goes solid. Some help I found online says to factory reset it by pressing and holding the button while plugging it in. I tried that but that did not change the behavior. While light flashes then goes solid. Don't know what to do. Please help!

Hello,On top of my issue with the Amazon Music and Plex libraries, I am not able to access and read music from my NAS.Set-up:NAS : Unraid 7.1.4SMB config:Enable SMB: Yes (workgroup)Hide "dot" files: NoEnable SMB Multi Channel: NoEnhanced macOS interoperability: YesEnable NetBIOS: NoEnable WSD:YesI went to Library, add network device, then entered \\192.168.0.11\mylibaraythen my username and password.I got a message ‘library installed on your system” and then immediately after, I got the message box “\\192.168.0.11\mylibaray is not available blahblahblah”My NAS is online and my windows machine is connected to the sahred folder. Only the Sonos S2 can’t connect to it.Is it a bug still not fixed or there is an issue on my side?The user I am connecting with ash the read/write permissions on the shared folder….Thks for your help!Valyno