Troubleshoot, tune and get the most out of your system
Recently active
Bonjour à toutes et à tousDepuis quelques temps, un de mes SONOS (pour une raison que je ne comprends toujours pas), s’est retrouvé sur un système différent de mes autres baffles. Malgré l’option “oublier ce système”sur IOS et malgré un Factory reset opéré directement sur le baffle, a chaque reconnections à mon réseau, le baffle se met automatiquement sur un système différent.Le baffle en question est un SONOS Play Gen1 (pour info, j’ai un second baffle similaire qui ne pose aucun problème).Auriez-vous une idée brillante et lumineuse pour que tous les baffles soient à nouveau sur le même et unique système?je vous remercie et je vous souhaite de belles fetes Moderator Edit - Translation by Google:Hello everyoneFor some time now, one of my SONOS (for a reason that I still don't understand) has been on a different system from my other speakers. Despite the “forget this system” option on IOS and despite a Factory reset carried out directly on the speaker, each time I reconnect to my networ
Sub won’t hold WiFi connection. I’ve tried everything! Incredibly frustrating! I have an early gen Sub that gets through initial WiFi setup and connection to Amp - only to drop it within an hour. Have tried adding local WiFi network in addition to Sonos dedicated network. Have tried Ethernet connection to set-up, then return to WiFi only - only to have Sub drop its connection yet again. This product is crap compared to all of my other Sonos products that have functioned flawlessly. Yet it is one of the most expensive I’ve purchased. Any suggestions would be appreciated.
I’ve tried everything! Incredibly frustrating! I have an early gen Sub that gets through initial WiFi setup and connection to Amp - only to drop it within an hour. Have tried adding local WiFi network in addition to Sonos dedicated network. Have tried Ethernet connection to set-up, then return to WiFi only - only to have Sub drop its connection yet again. This product is crap compared to all of my other Sonos products that have functioned flawlessly. Yet it is one of the most expensive I’ve purchased. Any suggestions would be appreciated.
I have been having an issue for months where during every third song while streaming Apple Music, Dolby Atmos clicks off and the song reverts to just stereo. I either have to pause the song and restart or back the song up to the beginning to re-enable Atmos. I can’t believe the engineers aren’t aware of this issue. It is extremely aggravating. It’s always something with this app. I have Arc Ultra, Era 300’s, and Sub gen 3.
Hi! Right now i have a soundbar under the TV. I use this for better sound on the television. The first gen Sonos Beam. I want rear speakers. Can I add one another Sonos soundbar behind me? Or do I only. have the option of simple speakers. Like Sonos Era.Thank you for the answers.
Hi,After the catastrophic crash of the S2 app, I waited a long (long) moment before recalibrating my system (arc+sub+era300) with a friend's IphoneBut I am realising that the trueplay On/Off toggle does not exist anymore on my android App (80.14.06).This is a strong regression for me (and a new disapointment).Does anyone knows if Sonos planned to get it back in Android App ?Regards
Hi. I’ve decided to create my new home theatre with Beam 2, 2 Sonos 100s and Sub mini. My audio and video sources is AppleTv 4k and I use FHD projector. So obviously my Beam is on on side of the room where the projector is casting the image and the projector is on the outset side (circa 7 m / 22 ft away). Im to make it all work I read and watched few suggestions that I must use an HDMI matrix/splitter as my projector won’t allow me to use eARC. So I bought devices like EZCoo Model:EZ-SP22H2EARCO or its brother EZ-SW21H21A-EO. The challenge I see is while I connect it all together to test with short (eg 2-3 meter HDMI like the white one from Sonos box) it does play Dolby Atmos movies and music from AppleTv. When I then connect it all as it should be with a long HDMI cable (15 m/50 ft) across the room it doesn’t recognize the signal (I guess as eARC) and plays only Dolby Digital or Multichannel PCM. So I know that now with new iOS 18.x you can Airplay 2 with Dolby Atmos too. nie I wonder
I haven’t noticed if your company intends to reinstate “dual mono” on the Sonos app. I have a café that’s in need of dual mono setting for the Sonos One speakers that I already have in the location. Without dual mono I’ll have to move onto a different brand of speaker that offers that feature. Please let me know if you intend to fix this problem.respectfully, David Cochrane owner operator Elevate Cafe
On the verge of insanity here. I’ve upgraded all compatible products in my system (Play 1’s, arc) to the new S2 controller to have everything in one place. Plan was to leave my gen 1 Connect (which is incompatible with S2 controller) and Boost on the old app. After much effort I’ve managed to move everything I wanted to the new app. However when trying to now create a new system on S1 for the Connect/Boost I've ran into a wall. The Boost has connected fine, but when I tried to sort the Connect it just won't work. First my S1 app started crashing every time it asked me to enter the WIFI password when setting up Connect. Then when I tried on different device it just won’t work: app will run into problems due I think to WIFI connectivity. The infuriating part is that the Connect is in the exact same place it has been for years with no problems. I’ve tried everything: factory reset the connect, temporarily wire it to the router via ethernet cable and then move back once set up, but app sti
I have Arc connected via the optical to HDMI adaptor from my Panasonic viera TV. I can only get stereo. The menu to change it to 5.1 digital disappeared from my TV
How do i remove the serial number and info of a sonos sub wolfer i am replacing with a new one?
Hi!Currently I am using Playbar, Sub Gen2 and two One SL’s for surround. Compatibility wise, what can I keep / use if I replace the Playbar with Arc and what If I go with Arc Ultra?Thank youNeven
I bought the Sonos amplifier for my wireless system. It doesn’t seem like it’s going to work for me. I don’t have any wired speakers or anything wired in the house. It’s all wireless well. That app still work
I have a sonos amp connected to ceiling speakers in my kitchen. The amp is in a kitchen cupboard with the speakers wired back to the cupboard.My wife has bought me a pro-ject t1 phono sb. How can I get it connected to the amp. It can't be hard wired due to the location of the amp. I want to be able to listen to my records through the ceiling speakers if possible.
Hello Sonos Community, am a bass enthusiast and find myself underwhelmed by my 2s Sonos Sub Gen 3’s with the Sub 4 seemingly being a minor port change, some enclosure changes, upgraded wifi, CPU & RAM I was hoping there would be something more on the horizon ? perhaps a dual 10 or 15 enclosure.. I’m looking to get that visceral experience.. beyond just hearing the bass I want to feel it. And I can’t find anything in your product stack or road map to facilitate this ?
Why are my sorround speakers and sub not showing in my system. No changes made to network or settings. If I haven’t made any changes, what have Sonos done? Any updates?
I have a new network and made all the system changes, but most of my 8 Sonos products won’t stay connected. Other than the usual, what ideas does anyone have?Coincidentally, the two products that remain connected are my oldest ones.
Having issues using 2 Sonos roams at the same time. Both “connect” but music will only play from one, when I try to apply changes for both to play, then sound goes away on both speakers, until I revert back to only one playing
I’m having really annoying issues with sound cutting out on my two Symfonisk bookshelf speakers paired with an Arc. It happens pretty frequently during songs or music. Sound will cut out for about half a second from either left or right symfonisk surround speaker. It can happen several times in a minute or not at all. My set up is an Orbi 770 router with a single satellite.The Arc is hooked up to the router via Ethernet through a Netgear switch.There is also a sub mini wirelessly joined up to the Arc.searched various threads and the suggestions all seem to involve adjusting the WiFi settings to avoid interference. All the devices near the Arc are connected to the router via Ethernet.I’ve tried setting the router to channel 6 for 2.4ghz WiFi. And I’ve changed the Sonosnet channel to 11.I’ve tried power cycling the Sonos devices.
I have an existing system with an ARC, Sub 3, and two SL One as surround sound used as theater listening and linked to a TV all of which are in my family room. These are on my sonos app showing under family room. I just got a ERA-300 which I intend to put in my office in home room. This will be the first item in this new office in home room. In adding this new speaker to the SONOS app, there appear to be two options, Get started with setup which is “white box” or “Join existing sytem “a non white box” to click on. Which one do I check?
I purchased a new turntable and made sure it had a preamp installed already. My current setup is pretty basic: Arc, two One:Play as surround sound, and a Sub. Based on my research, it seems I can just get the Port and connect the new turntable to that as it already has a preamp. Is that a correct understanding? I’m a little confused about the Amp and why I would need one if I do not have non-Sonos speakers.Also - I am considering purchasing two Era 300s to be used primarily for the music. Will it be possible to connect those to my system and create a setup just for music that uses just the 300s and the sub?TIA!
I have the same problem. I see it has been reported before more than two years ago and some other times all of a sudden the Sonos roam starts making a loud sizzling banging noise almost like an alarm going off. only way to stop it is to open the Sonos app??? What is it? And how can I prevent this from happening?
I have a beam gen2 and I recently bought an era 300. When I play TV audio the era 300 does some interruptions. When I play Spotify and other audio from the application it's fine. Do you have any idea what's the problem?
Already have an account? Login
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.