Fix & Optimize

The sonos app stopped the night between saturday and sunday! Did you roll out another unsuccessful update? Your telephone support hopes that a new update will be realeased tonight? 

Unable to connect message and I can't add a move 2 speaker, The other speakers are connected, It's probably something in the version update

I recently updated the Sonos App to 80.07.03 and now it doesn’t open. I click the App Icon and it crashes immediately. I’ve restarted my iPad and it still doesn’t work.  Using iPad 10th gen, IOS 17.5.1 (21F90) I’ve recorded a video of it. I’d love to be able to actually listen to my music without worrying what problems I’m going to encounter each time!! Deadset this app and brand have gone down the toilet. Nothing but problems. Nothing is ever simple or works. No reliability. Incredibly frustrating. 

HiLike a lot of other people I have has problems with the music library loading within the Sonos App following the upgrade earlier this year. I run Apple hardware and all my music collection appears in the Apple Music app correctly but when I link to the folder from the Sonos App only about 7% of my collection is showing. Both Apple and Sonos Support have not been able to help me cheers Steve 

I received my new Arc Ultra today and I was looking forward to switching from Arc to Arc Ultra. But after one hour of fruitless attempts I gave up. Yes, I have a brand new Ultra sitting in its package in my living room and for the life of me I couldn’t get it to work with my setup (Sub3, 2 x Era 300 surround speakers). The current system works flawlessly, is connected to my wifi and works fine. The moment I try to hook up the Ultra I’m unable to get it to work with my current wifi. The network pops up sometimes, most of the times none of my wifi connections can be seen. Consequently, the Ultra winks out and the usual suggestions for repairing the wifi pop up. Since my wifi works flawlessly with my Arc I see the problem more on the side of the Ultra. After having gone through the same hassles with the Ace and the ongoing problems with the app, I was hoping that the installation this time round should be a straightforward five minute job. Well, the speaker is back in its package. I’ll gi

I have a arc/sub and 2x play 1s.when I record programmes or watch something that can watch from the start-if I pause or fast forward sound is lost. If I turn the tv off and on quickly-sound is back…any ideas on what I would need to change?it’s a Sony a8 tvlatest virgin box. All good cables and no play stations etc attachedthanks!

Hello, I sold my Sonos Gen1 to buy the Gen2. I have two PlayOne surround. Since I made the generation change, I no longer see my two PlayOne. No more way to configure them. Is it normal or do you force me to have to buy two Era 100? Too bad, until now I was very happy with Sonos. I also have a One with a microphone. As much as I look at the Bluesound side as I have a Node... 

One of the things that I’ve grown to love over recent years is the way I can discover and listen to podcasts. I use 2 main podcast aggregators to listen to podcasts - Firstly Pocket Casts and secondly BBC Sounds since some podcasts I cannot find on Pocket Casts (I’d rather only use 1 app for this). So one of the great things about the Sonos podcast integration was the ease of seeing which was the next unplayed (or partially played) episode and play the next one or complete an unfinished episode. Unfortunately this has been broken since the major app update. As you can see from the two screenshots below. The first shows a podcast and it’s episodes - The May 24 one has been played and the next has not - but you cannot tell. On the BBC Sounds screenshot the second episode bookmarked has been played but again you cannot tell.Also I find if I manually check via the Pocket Casts app the next unplayed episode and then play it by finding it in the Sonos API for Pocket Casts it plays that episo

Other than turn off the surround speakers, how to stop surround speakers from fluttering when playing music from the phone app with ARC Ultra and Era 300 Surround speakers? I know this question has been ask before, but I have not found a good solution.

My Arc is connected to a Philips TV and has been working flawlessly until about a week ago. Since then, there is no sound when i turn on the TV (no settings changed on the TV). I have to disconnect the HDMI cable and then plug it back in to get sound. Anyone has an idea what could be wrong? Was there a recent firmware update? 

I bought a Sonos era 300 from UK on May 2023. I am using the speaker in India which has suddenly run into an issue. Can I get the product replaced in India if it’s still under warranty?

Hi there, I recently got the Beam gen 2 and like it very much. I have an older TV, so it connects via the optical line in. Works well and sounds good.I’m trying to figure out if there’s any way I can use my Bose 321 subwoofer with the Beam (see image of Bose AV cable). Thank you! 

Hi, I read around a month ago that inverting the era 300 was not fully supported in the software yet, was looking for some info on this topic, is it fully supported yet? If not when is it likely? and also can anyone explain what not fully supported actually means.

why is it i am unable to connect my devices i have 14 iproducts all app upto date no change in wifi ive rebooted wifi hard reboot all devices managed to get move connected then beam then went back on the app and another devive appeared tgat had been off for 2 days then nothing in yhe app very weird 

I can't get my Telus remote programmed to control the volume or mute on my soundbar. The tech tried a few programming codes with no luck. is anyone aware of more codes to try. 885 didn't  work. Thanks 

I still have very erratic control over the pause and volume of the Sonos system via the apps.  Bizarrely, some guy in Romania made a product called SonoPhone which reliably plays/pauses the system. I bought it, but I can’t believe that this functionality still doesn’t work.  I have just reserved IPs for all my Sonos devices on my Eero network. Are there other steps I can take to work around this bug in the Sonos-provided app?

It's been weeks and I cannot successfully connect my Era100 to Sonos Voice Control.  Note that when I tried setting up the Sonos Voice control , Sonos app is always updated.  Please advice.Thank you

 Found the IOS update 80.11.51 in the App Store.  After the update got the message No Products Found.  Went through the process of reconnecting each product to the network.  Got the Arc, Sub3, Port & Moves connected.  None of them show in the app.  Why is this the case?  The ISP app shows them to be connected.I could not get either 300 to connect.  The light flashes green & white, but no chime is played and after pressing the two buttons the connection attempt just goes around in circles before announcing failure. Deleted the app.  After reinstalling it and choosing Join Existing System it reported No System Found.  Not thrilled about having to start over.

Samsung QD OLED 4K 55S95D (2024)Sonos beam Not connecting 

Hello everyone,i bought new soundbar arc ultra, sub4 and 2 era 300 for my living room.Now i need help to chose the best placement for the 2 era 300.I upload here the CAD of the living room:Distance between era 300 speaker is 344 cmThis is the living room:Green height: 225 cmRed height: 241,5 cmPink height (couch): 97 cmThis is my idea.It is ok to place era 300 like in this photo? Or is better to place them like this? Thank you everyone for help.

I’ve been having an issue with my Sonos system where the audio isn't syncing properly across multiple rooms. I’ve tried restarting the system, resetting the Wi-Fi, and ensuring everything is updated, but the issue persists. Has anyone else experienced this problem, and what solutions did you find? Any tips on improving the synchronization between speakers would be greatly appreciated!

Hi i have 1 sub mini and 2 era100 and an iphone11 all connected to a fiber modem wifi5 . I reset all then i re connect again but ,  i use music app on iphone , every 10-15 min. no sounds . To start sound again sometimes i push play on music app, but sometimes doesn't work , so I'm forced to use sonos app i have to reconnect all the 3 speakers. Very very annoing...Any solutions? Thanks in advance

I cannot find the option to connect to my NAS using the Sonos app 

I have an existing NAS configuration, where the share is //NAS/Music Library/   with a space.If I try and add this to my Sonos SL using the app it just errors and tells me to check the username and password. (which I know are correct).Now the example on screen tells me not to use the trailing slash character, but if I don’t use that then the Add button stays greyed out.    I cannot believe in 2024, that I cannot use a sharename with a space, so can someone please advise how I should enter the location (I have tried quotes etc)Thanks in advance

Hi! I am an Italian living abroad and all of a sudden I can’t listen to Radio Rai anymore through the sonos app. I can still find Rai stations in Sonos radio and TuneIn, but I only get the “Welcome to TuneIn” refrain.Anybody can help?thanksLara