Fix & Optimize

Bonjour,Je n'en finit pas d'être déçue par l'application Sonos.Y a-t-il une solution pour que si je regarde une vidéo sur France TV ou autre, mon enceinte diffuse l'audio ?Merci 🙏

So I bought the Sub 4, installed and grouped it with my Sonos Arc Ultra, and I was really disappointed at the lack of thundering power.  I have the volume adjusted up to +15 and the sound its adding is underwhelming.  Does this sound right to others that have the Sub 4 or were my expectations just wrong?

I can’t add BBC Sounds to my Sonos Era 100 set. I’ve checked country settings (UK), have updated, reset and restarted app. I can see BBC Sounds in the list, but getting an error message after approving the app on the BBC site. Any tips?! Thanks!

I have had surround set up for years. It’s stopped working however. I have reset all speakers but it will not allow me to reset up surround, I have a beam, One SL and One in the living room (although only two shown in picture). I cannot add them all to living room to create a surround again. The app is also not showing the kitchen speaker even moments after completing setup.  

Sonos Arc won't connect to my Samsung TV.  Has been working perfectly for years.  Just quit working.  I have replaced the HDMI cable running from TV to Arc HDMI connection.  Have gone into setup mode to connect the Arc to TV but when it tests the connection, it says not connected.  My Samsung TV does not have an area in sound settings to set for Arc.  It never did and I never had to do this previously.  Hoping someone can help.  I literally have spent hours trying to figure this out.

I tested this setup with this youtube video (25 - 150 Hz Audio Sweep):  When I toggle off the sub in the app, I can hear the bass ramp up from 40 Hz.When I use the sub then I can hear it from 25 Hz, but at 65-75 it gets quiet. Not using the sub in this range produces more bass than when using the sub.Is this a bug with the sub or what is the reason for this? Will it be fixed? Sub level 0, bass -1, treble -2 and no speech enhancement. Tested with and without trueplay.Also, I saw some comments online stating that when toggling off the sub in the app, it’s as if you are still using it, except it doesn’t produce sound. This does not seem to be true. Seems to me that in that case the arc ultra is using all its bass, since I could hear the bass from 40 Hz when toggling the sub off, and when having it on at -15 the bass had low volume until about 75 Hz, as opposed to when having it toggled off. I can’t find the post with this claim, but I am pretty sure I read it on here somewhere. Is my conc

my Sonos Play:3 , i have two of them, played nicely for years, after latest firmware upgrade they show up as not registered and even resetting them three times Im not able to register them again. At the end the sonos app states that i have to contact the Support  im logged in, all other speakers working fine.  

My Sonos music folder is on a NSA310S external hard drive. I have always added CDs by ripping them to iTunes and then copying from the iTunes folder to the NSA310S external hard drive. This had always worked until now.The NSA310S icon has vanished from the bottom left of the file explorer screen where it previously showed up under This PC and Network. At least I believe it has vanished from where it used to be - I was initially worried I had forgotten how to do it!Click on Network and NSA310S shows up under Media Devices. Double click opens to what I assume is the device's IP address - a page titled Twonky with various links to settings etc. Right click gives three options 1. View device webpage (the Twonky page as described above), 2. Create shortcut, 3. Properties - this gives model number, IP address, serial number.If I open This PC NSA310S is there under Network locations. Double click to open and it states This folder is empty.The Sonos system plays fine - in other words it is sti

I have just reinstalled my sonos system (missed most of the app issues as was in storage) and now have everything back working agian.I had heard the album artwork from music library had returned to the app. Whilst I can see the artwork when I am playing the song/album, I do not see the artwork when I browse through the albums in my library or in the queue. So my question is, is the fix still needing further work and everyone has the same issue, or does everyone else have the artwork in their library seach and queue and not just when they are playing the song?Cheers,Simon

Not sure how a high end audio component company like Sonos could make a streaming music device that doesn’t have Bluetooth connectivity. After spending 12 hours installing this Mag 6.1 I and uninstalling it, returning it and installing a different system. #very frustrated 

In the iOS Sonos app, I can’t add any folders, playlists, or favorites to the Home screen. The only sections visible on Home are “Recently Played,” “Your Source,” and “Your Service.” Example 1: If I select an MP3 folder from my NAS and choose “Pin Collections to Home,” it shows as pinned, but it doesn’t appear on the Home screen.Example 2: In the YouTube Music service, if I select “Save to Sonos Favorites,” it says it’s saved, but it doesn’t show up on Home. The same issue occurs with Apple Music. Essentially, I’m stuck with just “Recently Played” on Home, with no way to customize it with playlists, favorites, folders, or albums. It’s very, very frustrating. I’m not sure if this is a known issue, but it has persisted for a long time. Details:• App build: 80.14.09 (release 20241209)• Device: iPhone 13 Pro Max

Hi allEvery time I start to watch something the volume is always set to mute. This only started happening a few months ago. Every time, there’s no sound. So I have to press volume up, then the green light displays, indicating it’s on mute, and I have to increase the volume to the desired level. When I’m navigating Plex finding a film, I don’t get the interface audio clicks. It’s so irritating, it makes me feel like things are broken. Does anyone know why this is happening?Any help is appreciated!

What is being done to fix the glitching, especially the repeated drop in streaming with latest S2 controller?  i have an Era 300 which is “usable” only if one is willing to endure countless drops in streaming.  it’s a joke that an inexpensive bluetooth receiver plugged into a TRS port on my old Play 5 performs flawlessly but the so-called advanced technology of the Era 300/S2 player cannot.  I’m ready to move on from Sonos if they cannot produce equipment that simply works.

Does anyone know how to connect Klipsch the Sevens, to the Sonos Port?  

I made a mistake and transferred the patio Sonos amp to the Living Room amp through an option presented on the Sonos app and didn’t realize the living room amp was unplugged. Now I am trying to restore the amp back to the patio and can not seem to make this change. 

Hi allI have a Samsung UE55AU8000 TV, which is connected a Ray via optical cable. I use the Plex app on the TV to watch my movies, which are stored on my Synology DS224+ NAS. My movie collection is encoded with HEVC. I like a lot of old films from the 40s and 50s and many of these have AAC Mono audio. When I play one, there is no sound from the Ray :( To get sound, I have to go in to the TV Settings > Sound > Expert Settings, and change Digital Output Audio Format from ‘Auto’ to ‘PCM’ and I’m getting really fed up of having to do this.  Can someone explain:The reason for this; I’d expect mono to be a fairly simple thing to deal with, and regardless of how many speakers there are, they should all simply play the same mono signal. Would that not be a better solution? If my solution is the correct one, if not, is there another way of dealing with this? I have ordered an Apple TV 4Kand intend to use the Plex app on that instead of the one of the TV. Not for this reason especially, bu

Please can someone explain me how the mobile app works (or actually does not work)???Each time I open it, if I want to access some of the settings, I have to login to my Sonos account… So I login… I then have access to some of the settings but for example if I want to add a device, I am asked to login… But I am already login!!!! Then I have a message that I have to login as the owner of the system…I found a “ transfert ownership” feature… I did the process with, at least, two logins involved but still the same nonsense: I cannot access to some settings and I am repeatedly asked to login as the owner of the system!!!Of course when I am logged in either in the app or on the web site… There is no way to register a product or a system.Sound quality of your products are very good but honestly the app the worst I had to experienced in ages.Anyways, if someone is able to tell me how to register my product and/or how to have access to all the app features, I’ll really be grateful;

Did the new update change the UI for the app when selecting a music source for a specific room?  

I use a couple Sonos at work, and wanted to check on the volume limit because it felt louder than normal. I cannot find the volume limit or EQ on the Roam??? There is EQ for the Sonos One SL's but no volume limit either?I'll have to check my home system when I get off work. But have anyone else had this issue? 

I recently jumped on the Sonos bandwagon with the Arc Ultra, Sub-4, and a couple of Era-300 (happy happy happy).But I just noticed that Google Assistant is not listed as an assistant I can install from the app.Is this just because it is new or something?

Please don’t give me BS answer “ oh you can use whatever platform”. I have set my preferred to you tube music and when i say hey sonos play _______ it plays it on Spotify!??? whyyyyyyyy it’s so frustrating. Sonos stop pushing services on me. it’s bad enough i can’t use my own sources lag free but you guys are making me choose a music platform too like c’mon!  

Thought I would post this here in case it helps anyone else.About 4ish months ago my Spotify Connect stopped working suddenly, this is the main way I use my Sonos so this was particularly annoying. I would see my speakers in the Spotify app but when selecting any speaker it would hang for a while then not connect.Steps I tried:Tried a full reboot of my system and reboot of my network Whitelisted the below on my PiHole to rule out any issues there: (.|^)spotify.com$ (.|^)spotifycdn.com$ (.|^)scdn.com$ audio-ak-spotify-com.akamaized.net audio-ake.spotify.com.edgesuite.net Removed Spotify from my Sonos services and then set it up again fresh Reinstalled Spotify apps and logged in fresh ensuring app had access to local networkNone of the above worked and I was in the same position.Over Christmas I noticed Spotify Connected worked fine at my parents house and additionally friends were able to use their Spotify Connect on my Sonos.I created a new Spotify account and it worked fine with Spoti

Hello,I have a Beam (gen 1) hooked up to my TV via HDMI arc input. I also have a pair of Play:5 (Gen 2) as surrounds. Been running this set up for a few years now to listen to music streamed via Deezer directly on the Sonos app and watching TV,. I also have Sonos dotted around the house and sometimes link the speakers up to play the same music throughout the house. No issues and fairly happy with this… until now! I have recently acquired a Musical Fidelity E100 integrated amplifier with multiple inputs, which is an ‘old school’ late 90’s amplifier (75W per channel), with a matching CD player and external Digital to analogue converter (DAC) Unit I am told that the amplifier was, in it’s day, a high end piece of kit. I wired in some passive speakers of a nondescript brand and have LOVED listening to my old CD’s since. It is wired as CD player>DAC>Amp>Speakers. I was really surprised to find the sound quality of this older setup compared to streaming Deezer through the pair of 5’

The manual says to turn the collar counter clockwise in order to swivel but is it so tight I don’t want to break it. Anyone have the same issue?? I searched on YouTube and no one else seems to have this issue..

I don’t see a way to turn off music overnight.  I’ve left music on outside before and my neighbors didn’t appreciate it. The best idea i have is to plug my Sonos amp into a timed outlet.  This will force the zone to be off during established quiet hours.   is there a better way to do this?