Troubleshoot, tune and get the most out of your system
Recently active
How do I know if my 2024 Sonos products are eligible for the extended 1 year warranty?
I have a Play:1 below in the Kitchen where I can listen to the news, which is coming from the Roku Ultra to the Beam. I had the Play 1 on wifi - it is setting near the Orbis extender. It drops out now and then for a few seconds while the Beam continues to play. (I’m close enought to hear that Beam is still working.)The Orbis extender is connect via wifi to the router.I’m testing connecting the Play 1 to the extender with an ethernet cable.Is that going to cause issues? Play:1: KitchenSerial Number: **************Sonos OS: S2Version: 16.5.1 (build 82360160)Hardware Version: 1.20.1.6-1.2Series ID: A200IP Address: 192.168.1.12WM: 0 Beam: Living RoomSerial Number: **************Sonos OS: S2Version: 16.5.1 (build 82360160)Hardware Version: 1.35.1.6-1.2Series ID: A200IP Address: 192.168.1.14Audio In: Dolby Multichannel PCM 5.1WM: 0 NETGEAR Orbi Whole Home Tri-band WiFi 6 Mesh Network System (RBK852) – Router With 1 Satellite Extender Moderator edit: Serial numbers removed
I have a Sonos Gen 1 system with the S1 controller. I want to add a subwoofer.or two. Can I add 2 subwoofers or more? Does the subwoofer need to be Gen 2 or Gen 1?
my Sonos connect will not show up on my iPhone 15 in the original Sonos app
Can I use am Amp to connect existing in ceiling speakers to my Sonos Arc plus Era 300s? The house we’re in has them already in the den’s ceiling. Where should I place the Amp? How’s the best way to connect and sync everything?
I try to configure my tv remote control with ny sonos ray and it seems to work, message configuration successful, but later it doen t work, I try again and happens the same
After a factory reset of 4 speakers, an update, and connection successful I get an error message " Unable to connect Try again later” for those 4 speakers but speakers I did not do a factory reset or software update are playing. I cannot add the other 4 speakers
Hi, Can anyone help with authentication of a 2nd hand product please? Thanks
Can anyone help. Amazon music randomly stops working and comes up with the message 'no content available'. It's happening more often now since the latest update. 13/01/2025.
I have just purchased a Sonos Ray. When I set the output of my tv to audio system, trying to adjust the volume the onscreen display increases or decreases the number but the sound level doesn’t change when using my tv remote. What am I not doing?
Hi, I have 2 Sonos speakers and a sound bar. Just had a new Internet provider and have managed to install one of the speakers to the internet. However can’t see from the App how to reinstall the other two as a Group. I’m sure it’s straightforward if you know!Cheers Roger
Why can Alexa toggle night mode on but not off?Im trying to set up a scheduled routine so it till come on at 10pm and toggle off at 9am for my wife. Very frustrating given this is a premium product .
I have a Sonos Beam in my lounge, and a Play:3 in my kitchen.The two rooms are remote from the router (and there are thick walls between them all, so I have cabled into the two rooms from the router, and fed both cables into switches.From the switches I have then cabled into a TV and a Sky Q box in each room, and also cabled into the Sonos Products in each room. They are therefore all on the same SSID by hard wire.To allow me to have wifi in the lounge and kitchen, I have a TPlink access point in each room, which have been”cloned” with the same SSID.I have no problem walking between the three rooms with my I-phone, and wifi is automatically picked up in each room, with only one network showing available in each room (same SSID)However, when I run the Sonos app, and move from room to room, the total system is not shown; only each product in that room. I spent a long time on the phone with support, deleting and setting up a whole new system, but it doesn't seem to have cured the problem.
I received a dused Zoneplayer S5 and can’t get it to work. I got the S1 app but the player is not seen by the app. The power seems to be intermittent, the light comes on and then disappears. Should I try to reset it? But how?
We have a Sonos sound system that has six amps which power speaker zones around our house. For some reason, the speakers on one of the zones randomly disconnects from Sonos on occasion and we have to wait a while for Sonos to recognize it again before we can use them.Anyone know why this might be happening?
some years ago one of the bands I follow released their albums with a remaster and it comes in 5.1 surround I want to make the most of my blue ray player here and set it up once in a while to play thesei have an older play bar connected to the tv the blue ray player is attached to then I can add my sub mini and the pair of Play 1’s I have - I assume it would be Playbar - centreSub mini - subwoofer Play 1’s - rear channels am I right in thinking Sonos will just auto adjust the 5.1 surround to meet what it has ?
Hi Very similar to this thread: If I use the iPhone app, search for “Easy Hits” and filter by Apple Music, I see a playlist called Easy Hits. The icon is a tea cup. All well and good.If I go to music.apple.com, search for “Easy Hits”, I see a playlist called Easy Hits. The icon is a tea cup. All well and good.If I use play.sonos.com and search for “Easy Hits” I see two folder icons, “Recently Added” and “Apple Music Playlists”. BOTH ARE EMPTY.If I use the legacy Windows app, I also get no results. EMPTY.So a total lack of consistency across the Sonos platform.I have “reauthorised”.
After todays iOS update suddenly one of my SONOS Play 1 are unable to update. I tried multiple times, same error. Disconnecting my entire SONOS system and resetting my home network, that didn’t help. tried to downgrade the speaker to S1, but also here an error occurred. Troels hardwiring it to the router, same issue. Any good advice? I’m starting to think there is something wrong with the speaker, but I’m 99% sure it worked this morning before I updated the App. I know for a fact it worked last night.
Hi, the Era 300s are coming soon and I think I'll connect them as Surround to my Beam 2 and the Sub mini. Only now I have the Era 100s as surround and I'd like to keep them in Stereo. I realized that I have to remove them and then pair them in stereo. And I think I also have to see as if they were in another room otherwise the Era 300s won't go into atmos. How do I do it all? Thanks. Andrea
Hello, Our power went out two days ago, and I’m not sure if it’s related, but I noticed yesterday that all of our previously created alarms were deleted from the Sonos app. I set a new one last night and it didn’t go off today. Looking in the Sonos app the alarm has been deleted.
comment mettre une playlists Deezer ? Moderator Edit: Google Translate-how to add a Deezer playlist?
I connected by Bluetooth Ace to our Sony smart TV. Excellent sound no lip sync problem. To get to iPad I shut Ace off, turn iPad blue tooth on and Ace back on to listen to music. How can I get back to listen TV without going into TV settings?
I have the latest 16.4.4 versions on the Sonos components,the latest Android App , the latest IOS app and the latest Windows App installed. Are you aware the compilation album fragmentation issue is still present on all of these and are Sonos working on it? I am confused as some posts claim the issue is fixed yet many others state that the problem still exists. I’d like some clarity on whether Sonos acknowledge the issue and are working on it
I have ITunes on a Windows PC. The iTunes Music folder has been happily linked to Sonos for years without a problem. I then decided I wanted to use OneDrive to back up my documents and music. Got that working but then I found that my Music Library content had disappeared from Sonos. On checking, I saw that Windows had changed the directory path on the PC from \User\music to \user\onedrive\music. I changed the share permissions on the \user\onedrive folder so that is shared with ‘Sonos Music WiFi System’ and was able to add the ‘new’ music library settings back into Sonos. However when I ‘Update Music Library’ it shows ‘indexing’ for just a few seconds but does not update any content. Any ideas?
I inherited a SONOS sound system when I bought my house. All was working until I swapped Internet Provider. I downloaded the latest Sonos app from Apple Store but cannot connect multiple speakers wirelessly. Would my Play 1 model speakers be incompatible with the app? I have been able to connect one speaker via an ethernet cable,
Already have an account? Login
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.