What Sonos should you buy? Ask here and find out from Community members which Sonos products best suit your needs.
Recently active
Hello everyone, I'm new to the community, even though I've been using a Sonos Play 5 1st generation since 2014. I would love to consider upgrading the system, and of course, money is often one of the main factors involved in taking decisions. I've never listened to a pair of Sonos 5 (1st or 2nd generation), neither a pair of Sonos one, with or without a Sub, so I have no empiric experience on my side. My question would be, is it better to by another second-hand Play 5 1st gen to pair with mine, or to sell my own one and buy two Play One and may be one day add a Sub? I wasn't able to find a similar thread on the community, but I hope not to be redundant.
Hi everyone! I am just about to buy a sonos device for a 5.1. Main device will not be wall-mounted so I have decided going for the playbase. I am just little worried about an apparent sibilant, crispy annoying treble. It will be used mainly for Cinema and Videogames. Is there really an annoying issue with the treble in the playbase? Should I go for the Beam or the Playbar, knowing that I will not use it wall-mounted? Thanks a lot!
I’m curious to see if anyone has walled mounted their Move, and if so, what did you use. I just noticed this available on Amazon. https://www.amazon.com/Acrylic-Bracket-Compatible-Portable-Speaker/dp/B081SHJRGD/ It’s not the prettiest mount I’ve ever seen, but it utilizes the charging ring and can be quickly removed from the Mount. The prices is also hard to beat. I’ll probably be giving this a try, unless someone has found something better.
Hi, Just looking for some advice on a new build. I’d like to put in some built in wall and ceiling sonance but unsure how I should set it up. Anyone interested in providing some feedback? Here’s the room: And here’s my thoughts: wall speakers for built-in L/R channels, and ceiling mounted for side/surround channels. Ctr channel from a Beam. Appreciate the feedback. AJ
I’m trying to plan out a house install using a Sonos Amp with in ceiling speakers. A couple of places I’d like to put speakers such as a bedroom only really make sense to have a single speaker. Is it possible to have a single Amp appear as two separate zones? So one zone uses speaker channel 1 and speaker channel 2 shows up as an independent zone? This would mean a single Amp could handle two smaller rooms quite efficiently, whilst still allowing independent audio control. I initially thought this is what Dual Mono mode meant but now I’m not so sure. If this isn’t possible then it would mean I’d have to use a Sonos One wall mounted for these areas which simply won’t be anywhere near as clean.
Hi I am able to take advantage of the trade up offer , I have a gen 1 play 5 am I able do get 30% off a play 5 room set ? many thanksMark
I’m finally ready to start unplugging old amps and getting rid of all these cords everywhere. I’m far from an audiophile but have been underwhelmed by my wife’s Bose Bluetooth “smart” speaker so I’m trying to calibrate expectations. I think I want to start with my office which is currently just a pair of B&W 600 S3s (no sub) run off of an old Harmon Kardon receiver. How would a pair of Play 1s compare to this setup acoustically with the highest quality streams from Spotify? J A pair of Play 5s would probably be overkill for this space but I certainly don’t want to downgrade an already modest setup. I’m also worried about the living room which is next where my wife wants small speakers that are “modern” and I’m worried the play 5’s might be too large for her although I can probably hide a sub somewhere if needed if she’s ok with Play 1s in the visible area. Thanks.
Before i buy a move i want to know the price of a new battery.Seems that nobody know's. I've asked in differend shop's and they don't know.Who can help me.
With the May end of life for my Bridge support, I'm not sure whether I should buy a new Boost or if I can go without one. I'd like to remain on a separate network. I'm hoping for some advice. Thanks!
Hi, How does TradeUp work for a CR200 Controller - essentially a product for which there is no (hardware) replacement? The TradeUp page allows me to check the box next to it and then “Click to receive your credit” (which I haven’t done yet, because I’m unsure about what I let myself in for). This doesn’t indicate that the recycle mode will be initiated. Does this mean I can claim 30% per controller that I own, but it won’t stop working? Can I then use the discount on any Sonos product? If I understand it correctly, then as long as I leave a legacy product (e.g. a CR200 controller) in the setup, none of my components will receive software updates, right? I guess I can’t use more than one TradeUp discount (30%) on a single new product? I don’t really need new products, but if I start adding the discounts for my controllers for the purchase of one item, I may “need” a new product ;-) Thanks….
I have two older ZP80 components that are eligible for recycle to get the current “Trade Up” 30% off credit. My question is - if I trade both of them, can the two 30% off credits be applied to purchase one new component, or do I have to purchase two new ones to apply 30% off to each? I already traded in one and I see 30% off applied to the item in the cart, but I see a “+” sign next to it as well which I am assuming means that if I trade up second ZP80 I would be able to apply both to one new component purchase: Is my assumption that two 30% off credits can be applied when buying one component correct or not? Since trade up is not reversible, I don’t want to trade another one if I have to purchase two different components since I only need one. Please let me know. Thanks.
When I bought my Sonos, it was the first one the store had sold other than the store owner’s. It was so new that they didn’t even charge me the full installation fee because they were learning how to set it up as they did it. I have a ZP 100,. The CR controller died years ago. My Zone player is connected to my stereo and its speakers. I control it from my desk top I mac and Alexa. We listen to playlists, our music library and TuneIn radio . Having this system become obsolete is going to be a bit traumatic for my 73-year old husband, so I want to, as easily as possible, duplicate what I have now. What component do I need to buy to trade up? Will I simply be able to disconnect my Zone player and plug in a new component and connect it to my router, or will I need to hire a techie, to figure it out. Having your technology become obsolete before you do is a hassle.
I’m wondering if there is a list of features that I’m missing out on for new products vs the ZP100. Does anyone have a summary?I don’t really stream or use voice activation. Just play my music from a NAS.I do have to say that I’ve been SUPER impressed with the ongoing updates to the ZP100 in all the years I’ve owned them. In fact, it is the biggest rave that I tell everyone why they should get Sonos over other systems. So super KUDOS to Sonos for that. So yeah, I’m fine with upgrading. I’d like to continue to support Sonos as a business.
Dear all, I recently purchase a pair of Sonos, and it was my entrance to Sonos system. My question is, since I have a Zeppelin air, how can I connect it into the new system. Which would be the best product. The Amp or the Port? Also, is there any advantage in connecting my new Sonos One to the AMP wirelessly? Thanks a lot Rui Freitas
I have a new Sonos Amp and am setting it up with 2 passive Bose 451 exterior speakers and want to install a subwoofer as well. Most exterior subwoofers are passive and not powered, is this compatible with the new Sonos Amp???
Dear Sonosers, As an inexperienced user thinking about joining the Sonos family, I am trying to figure out, which device to get. My goal is to couple the Sonos system with my old Panasonic SA-PM22 hifi, in order to listen to CDs played by the hifi throughout the home on future Sonos speakers (most likely Symfonisk speakers, but this should not matter now, if I am not mistaken). However, my hifi has a bi-amp output, meaning 2x2 sockets for wire/cord output (bass) & 2 sockets for rca output (high&mid) (see pics attached). When looking at the Sonos Connect devices (which I believe should offer the solution to my question), I do not see any wire/cord input option, thus I believe, that connecting my hifi only with rca to Sonos Connect devices will leave me with half the sound (high&mid) transmitted to the speakers of the home. My question: is there a solution to connecting my bi-amp hifi to the Sonos ecosystem? (I.e. what did I get wrong in the above?) Please note, that hangin
Hi, I'm looking to get an AV receiver which I can connect my turntable, DVD player, game console, TV and a pair of non-Sonos speakers. I enjoy having the airplay 2 and Sonos’ multiroom experience so I’m thinking to get a Sono’s Amp. However, it only has one line-in which is not handy to connect all my devices. My questions: Can I use any receivers or it has to be a “work with Sonos” product if I get a Sono’s Port to make my speakers in the Sono’s ecosystem? If so, do you recommend any slimline receivers? I’ve found Pioneer VSX-S520 online but not sure if it works with Sonos. If I use Sonos Port with a supported receiver, do I need to switch sources on the receiver or it will pick up what’s active automatically? Thank you.
Hi there just wondered if the play 5 22nd generation was been discontinued along with the sub the reason i ask they are on offer at incredible prices and after missing out on the play 3s when they were discontinued im a bit suspicious have you heard anything that would support my suspicions or are they just a great deal Many Thanks n
Hi, I have a Sonos Connect that I hook up to my amp through the digital output. I received an email from Sonos saying that I could “upgrade” to a Sonos Port with a 30% discount for the upgrade, plus they will be increasing the cost of the Port In January. However, I can’t see any reason for me to upgrade. If they had upgraded the digital out to pass through hi-res sources (e.g., 24/196 from Amazon HD), I would do it, but from everything I’ve read, it still is only passing 16/44.1. Am I overlooking anything, or am I right in assessing there is no value in upgrading from a Connect to a Port? ~Pat
I am interested in setting up a BEAM with 4 wired ceiling surround speakers. I understand I would need the AMP for the ceiling speakers and the BEAM would connect with the AMP. Has anyone done this before and can give feedback on the sound quality for both music and tv? Are there any drawbacks or concerns to this configuration? This is for a basement surround system, which I know the beam is only for small/med. rooms, but the ceiling height is only 7' so I am thinking anything more than this might be overkill?
What router (brand, model) to you recommend for optimal use with regard to SONOS?
From pure sound quality point, which would be better? Naim Qb (2nd Gen) vs. Kef LSX vs. Play 5 Stereo Paired. For the price, these are relatively similar range. Both Qb 2 and Kef LSX have top class metacritic reviews. Here I am purely interested in sound quality comparison when same source (non-Hires) are played.
This topic is fairly old and might not have the most up to date information. Please click here to see a list of more topics around the same subject. I was given a Sonos One. I want to use it like a bluetooth speaker connected to my phone and my computer. I don't see any instruction for this - all I see is to connect it to Pandora or other streaming services. Can I use the speaker like a bluetooth speaker with my phone and computer?
Just wondering if the Sonos One SL without microphone is really better than Play 1 in terms of sound and functionality other than making the controls more aesthetic and being Airplay ready? Are there any real upgrades in performance for playing regular music. Play 1st are now on sale in many locations.
Hello All, I’m considering adding a Sonos to my existing system to add more sound to a back bedroom. The existing system has newer Denon receiver, two floor speakers + center channel, Audio Technica PL-120 with preamp. Plus numerous other things connected to the receiver like TV, PS3, cable box, etc. Definitely an old school traditional setup for the most part. So the super basic question is...what do I need to add to get that single Sonos speaker going? Port? Connect 5? I don’t want to bypass my current setup and have the record player go directly to the Sonos. I might consider for the future going all Sonos and losing the current speakers but that would still entail using the receiver, right? I’m definitely lost with all this and unable to connect the dots by just reading others posts. Any help will be greatly appreciated! Thank you Todd
Already have an account? Login
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.