Speakers

I have tried everything with my Wi-Fi and my streaming services and cannot consistently get my arc and my two  era 100 speakers to play music at the same time without problems or cutting out. I have the best Wi-Fi and even tried using an extender. I've also tried repositioning my ERA speakers.Except for the arc playing my TV sound, Sonos has been a total absolute disappointment. 

I have a pair of Bose 901 series 3 from ~1974. They are in great shape, although I need to test them.I’m a Sonos user for all my running audio around the house.  My plan to utilize the Bose would be to use a Sonos Port for the incoming signal, run the output thru the Bose equalizer, and then get a suitable amplifier to power the Bose speakers with the signal out of the equalizer.I’m drawing a conclusion that I can’t use the equalizer to adjust the signal out of the Sonos AMP.Thoughts?

I asked Chatgpt the following question and received its answer. I would love to hear your responses/critique/agreement with the conclusion please: Question asked: “Here is the list of my equipment: I have 3 Sonos ports connected to speakers by speaker cable. The ports are all connected to my home network by ethernet cable. I also own 2 Sonos Era 300s, 1 Sonos Arc Soundbar and 1 Sonos Generation 3 subwoofer all working together as a single home theater system. The Sonos Arc Soundbar is connected with an ethernet cable to my home network and the Subwoofer and Era 300s are connected by wifi. The Arc soundbar, subwoofer and era 300s are listed as my home theater setup through the Sonos 2 App. My music source is from an Apple Subscription with the highest resolution enabled. I also listen to the home theater setup and apple music directly through the Apple Music app and the Sonos S2 app with my Sonos Ace headphones which are not connected by any cable. Can you please try to determine what i

I had a split system. on S1 app was two ZP 100.on S2 app was playbar, an two one’si updated WiFi network and created S1 as above then set up S2 as above. when I went back to use S1 system all components have disappeared and S1 now says all components can use S2. where have my S1 components gone?can I get S1 working again or will I have to downgrade S2 components to S1 set up as S1 then split system again?if the latter what a pain and mess up!

Are any subwoofers compatible with my Sonos One Gen 2?

i have just purchased 2 subs gen 1-2 not sure thinking i could play music straight from my phone so is that possible or do i need to buy more equipment 

Buenas tardes .Tengo Beam 2 + 2 One + Sub Mini.Quiero añadir Player CD Denon DCD600 y un altavoz Marshall al sistema Sonos. Tengo 2 preguntas:1- Lo hago a través de Port? Puedo conectar El Denon y el altavoz Marshall?2- Necesito también un amplificador  para el Player Denon ? Denon PMA-600NE??? No quiero comprarlos y que luego no funcionen bien.Gracias 

Can you pair 3 Sonos move 2 speakers together?

My Sonos roam was working perfectly fine a couple days ago and now it is showing a flashing red light. I have tried to charge it and I have switched out the chargers and it is still happening. The speaker will connect to my phone and other devices and it will tell me that the music is playing but no sound comes out. 

I have just purchased a second Play1 to pair with my original one. No problem playing them individually but pairing just will not happen. I get the message saying pair with the same model, well they are!

Primary Sonos one was disconnected for a time.  Now cannot report or reboot it.  Help

Why are my 300s coming on by themselves???????

Hi. My sub 3 will not connect to the ERA 100s I have. I have three of them in my kitchen. It connected ok with two but now I am struggling since adding the 3rd. Thanks 

A while ago I upgraded from Era 100’s to 300’s in my living room and I am now trying to swap an old Sonos speaker for one of the 100’s. It now says that I have a “Living Room 3” set up and that my “Office” no longer has something connected.How do I delete the 100 from whatever room it is trying to be in to reassign it to another room that used to have a different speaker assigned to it?

I love the sound the Sonos products produce. I hate the software that runs it.It’s always a problem getting my speakers to connect to the Sonos software. Always jumping through way too may hoops to accomplish it.Today, a new problem. Just wanted to play some music. Get a message that I have to re-authorize my Apple Music account.I do that.Still can’t connect to my speakers.

Is there another method to reboot Beam (Gen1) if the standard one of unplugging and waiting doesn’t work? I’ve done it several times and still not seeing the green flashing light. It’s solid white. Thanks!

I inherited a wall mounted Play 1 speaker, one Play 1 speaker, and I want to add one more speaker to create stereo sound, which sonos speaker should I buy that is compatible with the Play 1?

Really it will not stop

It seems like Sonos has out done themselves with the latest update.I have two Play 1s, and they’ve mostly been fine existing on the network in different rooms.  But today, after another forced update (boo!), it said it would update the speakers too, and after that, I could only see one (bedroom) on them in the app (the one I was beside when it updated).So I tried to add the other one (living room), but it couldn’t be found, although there was a brief moment when it said it found something, but then disappeared.So I went to the one (living room) that wasn’t connected, and decided to restart it.  After the restart it showed up, and I could update it.  Nice, I thought, but when I went to my system, I could only see the one I just updated (living room).  The previously updated one (bedroom) was no longer there.So I went back to the one (bedroom) that was working in thinking I’ll try a restart, but when I got in there, it showed up, and I could select and play music.But the other one didn’t

Hello Sonos Community,I recently rescued an old Sonos Play:1 from 2015 and have connected my favorite streaming services like Spotify and TuneIn. Since this model doesn’t have built-in Bluetooth, I’m exploring options to add Bluetooth capability.Specifically, I’m looking for a Bluetooth adapter or dongle that can connect via the Ethernet port, allowing me to use the Play:1 for computer audio and sounds.Do you have any recommendations for a compatible dongle or Wi-Fi bridge? Have you tried a similar setup? I’d appreciate any advice!

no sound from speakers after changing channels 

I’ve done some deep diving on trying to come up with a solution to be able to hook up my One SLs or Ikea Sonos speakers in my RV - these are both S2 compatible and working fine in my home.I found a YouTube video that talked about setting up a travel router and setting it to the same network username and address as your current home setup… with the caveat that you can’t run both routers at the same time or it will massively confuse your system.Anyway - I’m wondering if anyone has any input on this.  I was thinking of using my iPhone as the connection to the router in my RV.  Looking for more input and suggestions if you have them.  Obviously I would like to use speakers I own rather than purchasing more (mobile) speakers.

Good evening I cannot connect any headset with sound bar is anyone can suggest me the way to do ? Thanks 

Hi all,I’d like to know what Walkman K7s can be connected to my Sonos 5. I found a box of old K7s and would like to listen to them on my Sonos installation.Thanks in advance!

Bonjour,Je possédais une enceinte five5 génération 2 et je viens de faire l'acquisition d'une five. Je n'arrive pas à les configurer en stéréo ! Comment faire?Merci pour votre aide.Thierry  Moderator Note: Google Translate- Good morning,I had a five5 generation 2 speaker and I just purchased a five. I can't configure them in stereo! How to do it?Thanks for your help.Thierry