Spaces & Setups

What speaker(s) are best for playing vinyl via turntable and why would you recommend them? Thanks in advance!

Is there an app that will allow me to get along my playlists from s1 to s2? I saw an answer from @Controlav but can't find the app on my Pixel phone

Bonjour à tous j’ai actuellement investi dans une barre arc et je voudrai envoyer le son de mon vidéo projecteur dessus …. Seulement voilà mon vidéo projecteur est un épson avec deux prises hdmi classique  ( pas arc ni earc) existe t il un adaptateur pour convertir mes prises hdmi pour en fin profiter de l ensemble sur grand écran ??? merci d’avance pour vos idées:)

Tengo un era 300 conectado a mi TV justo debajo para ver películas pero me gustaría comprar la beam 2 para mejorar aún más mi experiencia de sonido al reproducir contenido multimedia mi pregunta es solo con estos dos bafles tendré una buena calidad de sonidos teniendo en cuenta que los dos estarían debajo de el televisor apuntando al sofá y así conseguiré agudos, graves y medios perfectos no me importa tanto conseguir el audio espacial  Moderator edit:Google Translate-I have an era 300 connected to my TV just below to watch movies but I would like to buy the beam 2 to further improve my sound experience when playing multimedia content. My question is, with just these two speakers will I have good sound quality, taking into account that both would be under the TV pointing at the sofa and thus I will get perfect highs, bass and mids. I don't care so much about getting spatial audio.

Do the Symfonisk picture frames work as rear surrounds with the newly announced Sonos Arc Ultra?

Tengo un era 300 conectado a mi TV justo debajo para ver películas pero me gustaría comprar la beam 2 para mejorar aún más mi experiencia de sonido al reproducir contenido multimedia mi pregunta es solo con estos dos bafles tendré una buena calidad de sonidos teniendo en cuenta que los dos estarían debajo de el televisor apuntando al sofá y así conseguiré agudos, graves y medios perfectos no me importa tanto conseguir el audio espacial 

Every time I login to Sonos it nags me to check for S2 compatibility.  I know full well I have perfectly functioning components that are not compatible with S2.  Why do you have to nag me every day??

Hi,I am trying to figure out how far below the TV the Arc has to be placed with an extendable wall mount, i figured since the Speaker is now coming out 5 inches i no longer need the full 4-5 inch clearance from the TV since the upfiring speakers are now in front, but the only other threads covering this topic were in a recessed tv. In an ideal world id like a flush arc that I can pull out when watching movies, and recommendations on minimum distance?Thank youDeep

I’m reopening this topic with Sonos’s new product line in mind. We currently have a setup that includes a Sonos Arc as the front speaker array (L, R, and Center channels) and two rear surround speakers powered by a Sonos Amp. We’d like to add a third-party subwoofer, connected via a separate amplifier, using the LFE input from the Sonos Amp. However, in the past, this setup was disabled when using the Arc in a home theater configuration. Has this functionality changed with Sonos’s latest product updates?  Can a 3rd party Sub be supported in some fashion, w/the ARC Ultra and Sonos Amp in the landscape.  

Long shot, but has anyone dismantled a Play:1 and turned it into a simple passive speaker fed by the traditional pair of speaker wires i.e. already amplified input?

I have a Sonos Port with current software (uploaded on another Sonos network)I tried to create a new Sonos network with this port on a different wifi network using my Android mobile phone with the latest App.The Add device process kept failing at the last step to register the port on Sonos network. I could see the device on my phone in the Sonos app; it prompted me to Fix it but it kept failing telling me to try again later.I then looked at one of the discussions and it suggested using the Sonos Windows App, which I have on my PC to manage the update. This worked. The registration step completed, and the new Sonos system is working fine, both on the Sonos app on my Windows PC and on my Android mobile phone.As the discussion suggested, the problem seems to be the mobile phone app. 

Buen día. No me deja resetear. Presiono el botón y la conecto a la luz, y solo parpadea en blanco, y después se pone verde el indicador, y no resetea de Fabrica. No puedo usarla, no la detecta ningún dispositivo  Moderator edit:Google Translate-Good morning.It won't let me reset.I press the button and plug it into the power, and it just blinks white, and then the indicator turns green, and it doesn't reset to factory settings.I can't use it, no device detects it.

I have a Beam under my TV screen and 2 “Ones” placed on the rear wall opposite the screen. The three speakers (and a Sub) are all connected as one “group”, so if I want the volume of the Ones to be higher, I have to increase the volume of the Beam. Can I increase the volume of just the Ones, and if so, how?

Hi I have moved into  a new house, which has speakers in all the rooms all wired up and ready to go.  If i buy a Sonos Bridge, will this enable me to stream my music from apple?  i realise it would be the sqame music in every room.  Do i need to buy anything else to get up and running? Thank you.

https://arstechnica.com/gadgets/2024/08/sonos-laying-off-100-people-amid-expensive-app-problems/ Oh and bring back SMBv1 support so we can all access our music as we had done perfectly well for at least the last 10 years...please.

I just upgraded from Beam 2 to Arc Ultra. Unfortunately I have issue of no sounds from surrounds (Symfonisk Lamp Gen 2). I have tried to reboot all the devices, it managed to fixed, but after a period of time not using, the problem reoccur again.  it means that I need to reboot all the devices to fix the issue over again and again which is very frustrating. Before upgrading, I have no problem with the Beam 2 + Symfonisk Lamp 2. 

Hello folks,i just ordered the arc ultra ultimate set (era 300, Sub 4) and just came across the eARC requirement and I’m a bit confused now. AppleTV 4K (2nd generation) Sony KDL-55W905A ARC only, DOLBY® DIGITAL/DOLBY® DIGITAL PLUS/DOLBY® PULSE according to the specs I currently have an AVR via Toslink connected and it indicates Dolby 5.1 signal (not PCM)I’ve read that esp. the AppleTV 4K uses a different Dolby MAT container that some TVs struggle with. But giving the fact I get a Dolby 5.1 it seems to work?Does every TV that supports Dolby Plus embedded Atmos ? Can the behavior differ via HDMI ARC ? How would the Sonos set behave “worst case” ? How many channels are active on a non atmos track (e.g. ERA 300 rears and height channels) ? I didn’t plan to upgrade my TV already. Does the HDFury 1 (or 2?) Arcana already support the Arc Ultra? thanks 

Hi,My question was asked per guidance from Sonos on stackoverflow. The question is specifically about the SMAPI, and if the Endpoint URL *must* be public. If so, Why? It doesn’t make sense and is a poor design choice for integrations.The question is asked here in more detail - please can somebody answer https://stackoverflow.com/questions/79162083/sonos-smapi-endpoint-can-this-be-decided-at-runtime

Hi,I changed my router to Zyxel DX3300-T0. After that Sonos app does not find Move. Router has WPA3 security protocol and I wonder if Move does not support that?

QUESTION 1:Can the sound quality get worse after adding Sonos Era 300 to the current Sonos system (BEAM GEN 2+SUBMINI+TWO SLS)?QUESTION 2:Although True Play is an excellent feature, the tuning process takes a long time. very little sound also causes disturbance while tuning, Its really embarrassing.QUESTION 3: Could  I add two sub minis to existing sonos system.QUESTION 4: Is  any Speaker upgrade program in india.

Since the last app update, I can no longer check for uodatws to my Ace Hesdphones. It just sits on "checking for uodatw" indefinitely. I have cleared the cache, rebooted the headphones, rebooted the phone, etc. Still the same thing. Anyone else experiencing this?

I currently have 2x Play 1”s and a Beam. What do I need to connect a Wharfdale SW150 SUB?Can I use a Gen 1 connect amp for this purpose?

Hello All, My system consists of a Sony 65’ A95L, A Sonos ARC 1st Gen, 2x Era 300s, and a Sub Gen 3. The ARC is mounted with my TV on a Sanus Extendable Wall Mount for Arc.Latley iv been looking at upgrading to the Arc Ultra, I already know that yes this mount will work for the Arc Ultra but this is not why I’m here today.So I found this video on YouTube: In the video he talks about how the Sonos Wall mounts Have magnets in them to tell the Sonos ARC that it is mounted.  Then I stummbled on this old Sonos Community thread from a while back without a real answer if this Sanus ARC Mount had the magnets that told the soundbar it was mounted or not.A user by the name Mark P said “I'll submit a feature request to our development team. We don't have a timeline we can share for this feature, but we'll be sure to make an announcement if we have any updates” However Iv searched every where inside the Sonos APP, there is not anywhere or any settting where you can tell the soundbar yourself that

As SONOS is now mainly cloud based, I get the feeling that some issues could be caused by a slightly higher latency and affecting service due to IP communications having a short time out for a response packet. This happened when the service was taken into the cloud from locally but the company forget to allow for increased latency.Do you think peoples experiences are varying due to their internet connection and possibly wifi connection?

I have a Sonos Port, with firmware updated to latest.It is being used to play songs stored on a Synology NAS.I use the Android version of the Sonos app; it is updated to latest.Recently -- maybe with the last firmware update -- songs played from the local library have about a 50% probability of cutting off partway through playback, after which the music resumes at the next song in the playlist.Wifi signal is consistently showing “Fair -- 35 dB”Any thoughts?  Anybody else seeing this?  Is this a firmware problem, or could it be my own issue somehow?