Show off your setup or get inspired by others
Recently active
Pretty sharp group here - so I will throw out a novice question. Forgive me if this is TMI. I have a pretty solid home system but will be moving into my girlfriends house. Her place, no sound system - so the A/V is up to me. I am starting from scratch at her location and plan on setting up an A/V closet for Vinyl and some older components. . Currently own Sonos - ARC, 2x One SL, and a Sub for the main room. I would like to incorporate some of my current piecesFluance RT82 Turntable (w/o built in pre-amp)CD Jukebox, VCR & Bluray PlayerLG OLED65C1 TV I also have decent pre-amp and/or an Onkyo TX-NR676 (that says it is Sonos compatible and has both wifi & Bluetooth) My question is, I do plan on incorporating more Sonos gear throughout the place, but since her place is a blank canvas, would I even need my Onkyo receiver if I do not plan on hardwiring any speakers at this juncture, or should I be selling it and going a different route? And if I keep the the Onkyo receiver with th
How about creating a few more more Sleep Sound stations - like Surf or Brook or Crickets?
Hi I am about to add 2 sonos 1s as a stereo pair to my living room. In my conservatory I have an existing system of 2 sonos 1s and a sonos sub. How can I configure the living room pair to use the sonos sub in the conservatory, but ensure the sub still works with the conservatory pair? Thanks for any pointers.
I have been trying to buy the Pro-Ject Debut Carbon Turntable in Black for two months now in europe and it is not in stock. Is there any expectation of it coming back?Not interested in the walnut version not the Pro-Ject T1Really looking forward to get my new setup.
I would like a feature (which I think is deficient by its absence today) in the app that allows you to toggle the Move into Bluetooth and Wifi mode. Sometimes I switch my move to bluetooth to pair with my TV streaming device in the bedroom. After the film is done, I would like to be able to switch the move back to wifi and be able to use its voice control etc without having to get back out of bed! Thanks.
When I ask my Arc to play music it plays way too loud and I have to go back and tell it to play at level 3. I have seen older post where it should play at the last know setting but that does not work ie: last setting was at Level 3. It always plays loud and I have to change the setting. I have looked but do not see a start up setting anyplace. Is there anything that can be done so it starts at a set level?
I have recently moved home.I have 4 Play ones and a Sub all linked by a Sonos Bridge all a few years old.They worked fine in my old home.I tried to set them up yesterday after updating but its not finding any of them on the S1 app.I have downloaded S2 app but its nit compatible with a bridge.Will I need to purchase a Sonos Boost.Thanks for any advice.
Thought I’d take my Sonos Roam on holiday. Didn’t work. Couldn’t connect to WiFi as the hotel (Radisson), like most, uses open access WiFi so instead of a password, you sign in with room number and family name. I kinda accepted that, though far from ideal, but I couldn’t even get the Roam to work via Bluetooth. I had the hotel IT guy try various workarounds for an hour but he had to give up. Does anyone know a solution for this? Cheers.
My main system is a Lyngdorf 1120 based system but For the Dining room i am thinking of getting a Sonos 5. Is it possible to use it with wireless headphones
As title, Sonos speaker wireless cant connect app via wifi without peer to peer?
Good Morning everyone,I have 2 Sonos Play:1 speakers with which I listen music via the Sonos S2 App, wirelessly, on my phoneI wish I could listen to my cds from the portable cd player and I saw online that I need a Sonos Conect Amp.I've seen some Sonos amp connect devices on ebay, Sonos ZonePlayer ZP100 Digital Music System Multi Room, I wanna buy of second hand.Before buying it, I would like to know if it is the correct device to listen to the compact discs from the Sonos Play audio speakers: 1 or I need another device.Any kind of suggestion is appreciatedBest
Hi all, I just purchased a Sony Bravia xr-65x90ck and I’m unable to get it working with my Playbase. I’m using an audio optical cable to connect the two, and the cable light is red, so the connection isn’t the issue. I’ve seen older threads from users with similar issues, but nothing newer that references the most current televisions. Does anyone know the correct settings for the television/playbase?Also, we use any Apple TV for all streaming etc. We also have a Nintendo Switch on a separate HDMI port. No sound on the Playbase from either one.
I used to get lock screen controls on my iphone to control the sonos system. Now they are gone. Not sure exactly when they disappeared, as I’ve updated both Sonos and IOS devices numerous times. A super convenient feature, which I’m really missing. I can see this issue has cropped up before, and the solution was to delete non-sonos airplay devices from the ios device. To me, this isn’t a solution. I would like to cast my phone audio to other devices. This WAS working. I can’t get a concise explanation as to why Airplay and Sonos aren’t working well together! Anyone know how to get this working?
I have an arc and have just purchased 2 Sonos one SL's to try and create a surround system. Initially, all went well, everything was connected and working fine. I then became aware there was no sound coming out of the ones and they had a flashing green light. I factory reset them, re-added them to Sonos added them as surround speakers and they instantly flash green as soon as they are set up. I have totally factory reset the entire system and yet as soon as they become surround speakers they flash green. Any help would be gratefully accepted.
I have a Sonos Five, Beam, and Symfonisk satellites in my living room. The Five is purely there to connect my turntable, so I do not want it to play when the TV is being used. Is there a way to accomplish this without having to manually toggle speakers every time we switch from the turntable to the TV?
Hello everyone, I’m building a home system that would integrate my TV and turntable, as well allow for streaming. I’d also like it to work over WiFi and be expandable (i.e. with a future multiroom setup), so I’m looking at the Sonos Amp. The idea is to run hook up both my TV and turntable, to just 1 amp (using the available line-in and HDMI ports) and my existing pair of bookshelf speakers, but I can’t seem to find anywhere how it does input switching. Can it detect when I’m playing a record or turning on my TV? Or do I set it up for 1 thing only and then have to go through endless menus every time you want to change my audio source?Also, can I then add wireless Sonos speakers to this setup without adding more Sonos Amps?Thanks for any advice on this!
I have a Beam (gen1) under my TV, i also have projector which is near the sofa. Without running a long spdif cable to the beam there is no other way to get sound to come out of the the beam from the projector. if i were to buy a second beam and place it under the projector and connect it using the spdif cable. Then using the app to group the beam under the projector with the beam under the TV. will i still get 5.1?i know this is a long way around but will it work?
Hi,I have a PC connected to a videoprojector, and I want to link it remotely to a Ray soundbar. Can I use a Sonos Port connected to the PC, which will then link up with the soundbar ?Thanx !
Feature:Would be great to have a reminder function in the app for user to bing the Sonos Move back in the house, e.g. an alarm that goes off if the Sonos Move is not back on the charger at a set time like 1amRationale:I do have the Sonos Move for round about 3 months. However, I already forgot the Sonos Move 3- 4 times outside on the terrace of my house. Once of course in pouring rain all night long - all good. A Friend mentioned the same is happening to him.Forgetting the Sonos Move outside Seems to happen when enjoying this great piece of equipment.
Hi there. We privately sold our Sonos Bridge and Play 1 speaker yesterday but have not unlinked these products from our account. Can anyone help with any instruction on how best to go about fixing this oor will we have to ask the buyer to return so we can reconnect to our WiFi system?
Does anyone know if you can use a Sonos beam gen 2 with a technics receiver and a woofer on a Samsung q70. Thanks
I’m having a hard time figuring out exactly which Sonos AMP I need to buy.I have 2 outdoor speakers on the pool deck and want to stream spotify music to them using the sonos app on my iphone.I ordered a Sonos Connect S2 Modern device off ebay and it didn’t work.Other than the new $700 AMP, is there a previous version that could do this?I’m new to Sonos and can’t figure out Connect vs Connect:AMP vs Media Streamers vs New AMP.
My Sonos system suffers from the Controller being slow to start, I mostly use Android on tablets, usually three different ones, and all have the same symptom.When waking the Sonos app from sleep or starting it if not running, it takes 20 to 30 seconds to populate the screen and before any action can be performed.Here (diag below) I rebooted my Samsung S6 Lite and started the Sonos app. I’d left it to show the System / Rooms page where the problem is most obvious. It populates the screen with a random room, then adds the others over the next 22 seconds. They appear in what looks to be a random order and with the Room tiles initially overlapping in the display. During the population process the “active” Room bar appears on-screen but the Play button is not functional. At first appearance it isn’t even active, tapping it has no effect. If tapped a bit later it switches to show it has been tapped but still isn’t functional. Waiting a bit more it will change to Play or Pause and the selecte
i want to be able to use a wireless microphone with my Sonos AMPwhat kind of setup do i need please? any recommendations
I don’t have many complaints about my Beam, but one thing I’ve found really frustrating is that night mode turns on and stays on indefinitely with no indication outside of the app.It’s very infrequent that I interact with the app so have found on more than one occasion that after using night sound on an evening, I’d forget to turn it off and it can take me a while to realise why the sound is so sub-par over the next few days.This is particularly apparent with my older parents who also have a Beam. They are less attuned to the audio balance and so end up leaving night sound on accidentally and compensating by boosting the volume. It’s usually accidentally left on for weeks unless I notice when I visit them.The fix for this seems fairly simple. Toggling night sound on should (I think) by default timeout the next morning (perhaps with a long press to override). This way night sound mode would automatically disable the next morning so there’s no need to go in and re-adjust settings, i.e. “
Already have an account? Login
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.