Fix & Optimize

Hello,I bought an Arc Ultra and 2 Subs Gen 4.I have everything set up over wireless only and all are visible in the app.  I can connect one of the subs  to the Arc Ultra but not two.  I can connect the first one fine, and then when I go to either Add A Second Sub under Ultra, or by trying to connect the second sub to the Ultra, it fails.  It actually says the second sub was connected, the ultra makes a bong sound that it adds, but the second sub never attaches in the app and it doesn’t play.  I have disconnected both subs and tried them in different order and the first one always connects, but the second one cannot add per above.  So both subs are confirmed working if it is the first one added, but I can never succesfully add a second sub.  I’ve gone through the menus attempting over and over and reboots, etc., and it just does not work.  What am I doing wrong here???  Its extremely frustrating and have wasted a good part of a day now trying to do this and going through all the waiting

Hi, I’m setting up a home theatre and need some advice on wiring and what components to get. I have a sonos arc, sonos in-ceiling speakers (x2), amp, & sonos roam. I also plan to get the pro-ject T1 turntable.  My goal is to watch TV with the arc + in-ceiling speakers. And occasionally listen to music on the pro-ject t1 turntable on the arc + in-ceiling speakers. Not at the same time of course. I asked ChatGPT and it told me to get 2 amps.  Is this possible with one amp? Is there anything else I should get for a TV/Music setup?

Does Sonos ace work on the Sonos s1 app

Ive read a few things on how to stop people having access to my sonos while at home on wifi but why is there nothing when im out in public.  I was recently powering up my headphones and someone connected to them.and played their music.  Then I didn't have access to play music until I was out of range from them.  I dont have multipoint access turned on.  This is a huge let down...what can I do?

Roam bloquée Lorsqu’il est branché led rouge fixe impossible de l’éteindre, impossible de le réinitialiser, il reste bloqué  Moderator Note: Google Translate- Roam blockedWhen plugged in, the red LED is steadyIt can't be turned off, it can't be reset, it remains blocked.

Every morning, the Sonos app shows no services. I have to re-add my Apple Music subscription, and I now have eight Apple Music profiles in the Sonos app (all with the same apple ID). Sonos Radio disappears too and comes back when Apple Music is re-added.  How can I make Apple stay? I was hoping to expand my setup, but it won’t be worth it if I have to add my services every day. 

Me rindo, es imposible gestionar de forma cómoda vuestra aplicación, los equipos portátiles se desconfiguran constantemente, y es una pelea agotadora conseguir que se sincronicen, Una lastima, tenéis buenos altavoces, pero una aplicación inestable que consigue que la experiencia de uso de vuestros equipos portátiles sea una frustración constante, antes de poner a la venta equipos portátiles, deberíais comprobar su funcionamiento y estabilidad, porque por el precio de vuestros equipos, deberían funcionar mejor que un altavoz del bazar chino. Moderator Edit - Translated by Google:I give up. It's impossible to comfortably manage your app. The laptops are constantly getting out of configuration, and it's an exhausting battle to get them to sync.It's a shame. You have good speakers, but an unstable app that makes the user experience with your laptops a constant frustration. Before putting laptops up for sale, you should check their functionality and stability. For the price of your devices,

I don’t usually recommend attempting to use SONOS for Karaoke, but I’d like to hear from anyone who has attempted using the HDMI-ARC or HDMI-eARC connection to a SONOS soundbar. The latency for this connection is 30ms vs 75ms for a Line-In connection. The 75ms delay is totally frustrating for most people. Is the 30ms delay tolerable for you?

tune-in radio series are a constant issue with dropouts, disconnecting to service and reliability - there are conversations and questions regarding this issue on this support chat that go back a number of years yet the issues remain the same and are unresolved. the service is not compatible with Sonos and should be removed - and this will remove the frustration.

Setting up/transitioning preexisting player and connect amp system in new home, and I keep getting Not Connected. The system has worked on and off, but I can’t seem to get it reliably connected and usable on my network. I have mesh wifi and ethernet. I have connect amp connected via Ethernet and playbar connected via WiFi, or at least that has worked previously. Now when attempting to use the system I get the Nit Connected and when attempting to Update Network in System Settings, it sees the devices, but keeps telling me I need to do a Factory reset on the devices, which I have now down 2-3 times on each device. Help! 

Hi AllI have recently entered the Sonos ecosystem. I have a Beam gen 2, 2 Era 100s and a sub mini for the home theatre setup which is very impressive. The question is…. I am considering putting another two speakers in my kitchen/dining area for listening to music. I would also like to group them with my other equipment so I can play music throughout the house.I can get two Play 1s for £65 each or two Play 5 (gen 1)s for £75 each. Which would be better in your opinion?I have read that there may some compatibility issues regarding the app, I currently use the S2 for the theatre setup which is up. Is this the case?Many thanksNeil.

I had a very long exchange yesterday via chat as I am not getting the kind of volume I would like on the Sonos Ace when playing atmos music via the amazon music on my ipad. I also happened to mention that the volume on TV audio swap was low too. The Sonos guy then went through the process of increasing the volume on the TV audio swap which did work and I assumed rather naively that this would increase the music volume too. It did not and when I questioned this it was like I was speaking a foreign language as the guy then asked me if there was anything else he could help with I repeated my main issue i.e. the low volume on the headphones playing music and he told me to have a good day and terminated the chat. Any suggestions on how to increase the volume?

I’ve had Sonos for 3 years, I’ve never been able to alphabetize scrolling or search through my Tidal Playlists. Is that available now, and how do I find it? 

I can add a playlist to the queue once that playlist is playing I want to add another playlist to the queue. I go to anI go to a playlist and choose add to the end of queue and it says unable to add to the queue.

I have an existing system up and running.  I just purchased a Bridge. Can I add it to my existing system??

Is it possible to find a worse piece of software than Sonos desktop? Once again mine has stopped working, terrible stuff.

I’m hoping someone can help! My Sonos Sub Gen 2 seems to be malfunctioning. When playing deep bass, the sound is off—it almost sounds like one of the subs is blown. There’s a waffling or rattling sound, especially during heavy bass notes.I’ve tried the usual troubleshooting steps like power cycling and reconnecting the sub, but the issue persists.Has anyone experienced something similar? If so, did you find a fix? I’m looking for recommendations for repair shops that specialize in Sonos products or, if possible, parts that could help with a replacement. I’m in Baton Rouge, LA, but any advice would be appreciated!Thanks in advance!

My Arc is unusable.  It won’t update and it won’t register without update  it’s now bricked   spent ages on chat sent in logs then chat person ended chat   Eduardo M    I’ve reset itI’ve plugged Ethernet direct into the arc from routerI’ve spent hrs on chat sent in logs The the rep hangs up on me. now he unusable. waste of moneytrued. Numerous devices to do the upgrade. 

Is this a political isssue? A sonus issue that will be fixed? Or something else? Until this morning my pbs stations have playing well on my speakers for a long time  

Puedo escuchar audio a 192Khz en mi Beam Gen2 (I can hear audio at 192Khz on my Beam Gen2) ? Si es asi como puedo hacer para que la barar pueda reproducirlo (If so, how can I make the bar play it) ?  

Hello, the problem I’m reporting here is probably the same as one already reported into this community a while ago (in 2021). For reference, you can look to this thread from 2021 that was unfortunately discontinued.In short, the problem is as simple as he is (very) annoying. In Spotify, when the user flag a song as licked, the song is automatically added to the list of “Liked Songs” (see the capture I made in my Spotify app that show my current Licked songs list. When I select Sonos as the output for the sound from my iPhone, it is impossible to play any of the song that is into this list. Would it be a Spotify bug, I would not be able to play songs when I listen to a bluetooth headset. Yes, it not run only when I stream from my smartphone to my Sonos system. It is the same problem while I stream from Spotify from one Android Smartphone. I precise that my entire Sonos system is up to date as well as I own the very latest generation of Sonos system (Arc Ultra, 2 Era 300 and one Sub 4).W

I just received my new Arc Ultra soundbar, the speaker setup itself was successful but when I run the TV connection using the HDMI Arc cord that was included, my TV does not find the connection. I see the HDMI port on my TV recognizes the connection, my CEC is enabled but it won’t display Sonos device in order to connect. No sound comes from the soundbar to TV connection.  I’ve updated the software, I’ve unplugged the hdmi connection and restarted both my tv and soundbar, then ran the setup again. Nothing works.  any ideas?? I’m super bummed I can’t use my new setup. 

The entire day my app can’t play anything through the Sonos app. Doesn’t matter which service I try I get an error message saying “could not connect to the server”  This is just another in the endless number of issues with the app. Yes I have restarted everything a few times.

Starting this week, my Sonos Beam 2.0 speaker will no longer connect to my iTunes library. These are local files, I don’t have an Apple Music subscription any longer. I don’t want to pay for it when I have a large iTunes library of local files. My Sonos Beam 2.0 has been working fine for the past year, and literally mid-song, it disconnected and Sonos told me a firewall had gone up. I checked it, but I’m allowing all incoming connections from Sonos, so this shouldn’t be an issue. Every time I try to connect Apple Music as a service on the Sonos app or on my MacBook, it tells me I need to re-authorize Apple Music. I do this, and then it tells me that I need to do it AGAIN even though I just did it. Now, on the Sonos app on my MacBook when I select Apple Music, it tells me that I need to renew my Apple Music subscription. But I just want to be able to play my local files. At one point, I had my iTunes library uploaded to Sonos, but it erased it from the app. Then I was using the Apple Mu

I our headed two roam 2 devices. Each came with a cord, but nothing to plug into wall to charge the unit. How do I charge the Roam 2?