Troubleshoot, tune and get the most out of your system
Recently active
SONOS app on Apple iPadBrightspeed Fiber with GigaSpire BLAST u6.2 Router I have used SONOS for years with both DSL and Spectrum cable. Today I had Brightspeed Fiber installed. The router has one SSID for both 2.4GHz and 5GHz. Sonos products are not found on the network and of course will not connect. Have tried …Disabling the 5GHz radio in order to make ONLY 2.4GHz available Disabling the router firewall entirely so there was no filtering of traffic in or traffic outAnd assistance would be greatly appreciated. I’m all out of ideas to make SONOS work. Thank you !!!
I recently upgraded from arc+ play 1's to arc ultra + era 100I made a quick trueplay with my android app , but i don't know why we can't set manually surround distance ( greyed After the procédure) after that.I doesn't make sense since quick trueplay doesn't adjust listening position ( Don't tell me to do advanced trueplay, it never sets a good listening position between surrounds since years....)
When I Save a user created playlist from Amazon Music to Sonos Favorites I get a message saying Removed from Sonos Favorites instead of Saved to Sonos Favorites. The playlist does get added. The wrong message pops up.
First of all, I’d like to clarify something: Can I have multiple homes linked to the same Sonos account?For example, House 1 with one system, House 2 with another system, and House 3 with another system, all connected to a single email account for Sonos?This would allow me to control the systems by connecting to the Wi-Fi of each home without the need to have three different accounts with three different emails.That said, here’s the issue:I have a Sonos system with a Move 2 at home.I purchased another Move 2 for the office. When I try to connect it by creating a new location in the app, the application detects the Move 2 and proceeds with the setup process. However, when I select the Wi-Fi and enter the password, it says the network is not recognized.The Move 2 for the office has been reset multiple times (even though it’s new), but the connection still doesn’t work. If I create a new account, the Move 2 connects without any issues and completes the setup.The problem is that managing t
Hi, I have an Arc and sub and I was thinking of adding my 2 Sonos Ones as rear speakers. The issue I am having is that the power cord does not reach the wall plug. I need a 3 meter power cord and I can not seem to find any. My wall plug is just a 2 pin power point, so I can not use an extension lead. Any suggestions or know where I can buy a 3 meter power cord for the Sonos One?
Hi, my Sonos-App on iOS shows the following under Settings → Switch SystemSonos System (1) [5 Rooms] Sonos System (2) [5 Rooms]So if i switch between the systems, nothing obviously changes in the app. If run “Forget System” in the app and “Join an existing system”, it shows “Multiple Systems found” and then lists all my Era 100s and Arc Ultra in System one system, and my 2 Sonos One SLs in another system. When i join any of them, my app is like before (i.e. i see all rooms and speakers and can control them)If they are split, some things can be only done by actively switching the systems, for example if i want to unpair or pair my One SLs into a Stereo set, that only works if i switch to Sonos System (2) (which contains only the One SLs i believe).I already tried factory resetting one of the two One SL and before re-adding it to a system and i made sure i’m in Sonos System (1) before adding the One SL, however, after forgetting the system and rejoining, it still shows them listed in Son
I have the following problem.I had my Gen 1 system working for many years, and today (me stupid) I pressed update..And here are the problems:My play 3 and 5 (1st gen) speakers stopped to playAsking to update but of course won t update because it is not compatible SO I reset play 3 to factory settings on SONOS app, and downgraded to S1 , but not sure about the result I cannot add it to sonos S1 appPlay 5 was also reset, but I can t even see it on Sonos app, What I am doing wrong?From 6 speakers only 3 are working ( 2 pcs play one, and connect)2 pcs Play 5 and one Play 3 not working
Not sure if it is supposed to or not, but it would be great if the Sonos S2 Controller App when playing a song would call the Windows Media API call so that it would show as now playing and the Windows media shortcut keys would work like volume up and down and previous and next song. Also, when the screen it locked it would show up as the song now playing on the lock screen. This would also allow other applications to display this information as rich presence in applications like Discord.
In the current Sonos app on iPhone, I see absolutely no way to create a playlist. I have searched online and the steps that even Sonos lays out do not even match what is on the corresponding screen. Ugh, this is such an awful app that it is unbelievable that any designer could have even thought of this. I’m a pretty educated person- I have an M.D. and an MBA and I record music in Logic as a hobby, yet I cannot begin to figure out how to make a playlist. It was so much easier in the old app! Can anyone help me?
So the replacement battery is still OUT of stock??Is it ever going to available again?Has anyone purchased a generic version?
Morning,I’ve taken delivery of a Sonos Arc soundbar to upgrade my Beam (Gen1). Using the existing cabling (also tried the new cabling in the box) when setting up the Arc everything goes to plan until I get to setting up with the TV (LG Web OS UK6950PLB). The app advises that no HDMI-ARC is available, but am getting a signal on HDMI 2 from the arc. I’ve tried restarting the app along with the tv and ARC. The Beam works fine through my LG on the HDMI port so know this is fine.I’ve also defaulted both the ARC and TV with no success. Has anyone else had this issue or suggestions on how to resolve?
Hi,I mostly use Sonos to listen to my music library (USB device on my router). I use the iOS app and despite the latest updates, some functionalities are still missing for me.I like to use « Folders » instead of « Artist », « Album » or « Song », because it keeps my music in the classification order I want (and because all albums/songs from an artist are in the same place, even if there are many featuring with other artists).In previous app, I could play all files in a folder without having to manually choose each subfolder/file.In the new app, when using « Folders », I first have to choose one subfolder (album) to have the option to play it. If I want to play all the subfolders (albums) of a folder (artist), I need to add each subfolder to the queue.Whereas.. If I use « Artist » instead of « Folders », I do have the option to play all.Previously, « Folders » worked the same way as « Artist » for example. When I was in a folder, I could play all that was inside in one click, use shuffl
Hi there, I have a Foxel iQ4 box, a Sony KD-49X8000H and a Sonos Beam (gen 2) soundbar. I currently have the Beam connected to the TV using the HDMI-ARC output. This configuration appears to work well, but I’m interested in getting the best performance from my system.Q1. Is this the best way to conect the soundbar to the TV?Q2. I have the option of sending audio from the TV to the soundbar in either PCM or compressed Dolby format. Which is the best option to use for the Beam to optimize sound quality?Thanks, Andrew
We have two devices in adjacent rooms…… and Need to change the wake-up Word on one of them. Found several older threads stating that this wasn‘t possible.Is this still the case today?
Hi everyone,I recently purchased a Hisense Canvas 65 Frame TV during the Black Friday sales, it was a great deal! However, I’m now trying to figure out if it will work with my Sonos home theater setup to get Dolby Atmos sound streaming.Here’s my setup:Hisense Canvas 65 (being shipped) Sonos Beam (Gen 2) Era 100s (as surrounds) Mini SubI don’t plan to connect any external devices (like a gaming console or Blu-ray player) to the TV or the sound bar, I stream content directly from the TV apps (Netflix, Apple TV, etc.)When I checked the specs for my new TV, it has two built-in speakers and it says the surround sound supported is DTS Virtual:X and not Dolby Atmos. If I conenct through eARC, will my sonos equipment enable Dolby Atmos content? I’m getting mixed answers online - some people talk about audio passthrough and connecting devices straigh to the sound bar, the Dolby Website says the eARC connection should do it - but does not say if the TV's surround compatibility matters, etc.Can
Hi all, just moved in a month ago so forgive the barew alls. Long story short, the beam 2 doesn't do a great jobo f filling the space (unsurprisingly) in the living room. Theo ther issue is that while you are standing in the kitchen, you're pretty far away from the TV (and the soundbar), sou nless you really crank it up it's tough to hear. I thoughta bout the Arc sound bar being better for the situation buth ave a few other thoughts.The ceiling in the living room has two junction boxesw here speaker wire has already been pulled (see pics).1. it seems most people suggest having passives peakers in the ceiling and using that only for music - Is this the best option here or should I look to have the passive speakers bonded with an Arc soundbar for a lackluster surround setup? I realize it's not ideal but if it keeps the look clean I'm open to it.2. l'm fine with passive speakers for music only in the ceiling and surround setup elsewhere. Trying to achieve a clean look and don't want to
Sonos Location PossibilitiesHi there Sonos folks,I just purchased 2 era 300’s to accompany a Arc Ultra, but I’m having trouble figuring out the best placement and angle. In the photo there is a representation of a couch which will be facing the TV (we are replacing this couch with a U shaped couch). The room is a bit tricky because it’s vaulted in a unique way, my guess would be for the red circles I would want it facing down, but I’m not sure if it would work well. The couch is relatively close to that wall as well, probably 4 feet? It seems like the downward facing driver wouldn’t hit your ears at the right angle? I believe I read that the upside down orientation is now supported via true play and Atmos content, but would love confirmation. Would blue even be a realistic option? Any other ways to do this? Thank you so much for the help!
sonos ace not connect to my asus vivobook !!what to do ??i did everything
I have , Optoma HD146X projector and it has output Audio (stero) 3.5 mm jack how to connect to sonos arc ultra sound bar...
HelloI cannot see any recent threads on this but about 10 days ago my alarms have just stopped working altogether. have tried setting an hour before, radio, Sonos chime, set playlist etc but nothing seems to work. The time comes and goes and no music whatsoever from the Sonos. So frustrating as this used to be perfect before all the problems. Then the set timings had to be an hour before but it was at least functional. Now nothing
Hi! I have a playbase and a new house. I have a router and I first connected the playbase to the network generated by the router. Then I installed a mesh network in the house because the router did not cover the whole thing. Now I am resetting the playbase to set it up with the mesh network. However, in the setup it only offers to connect the playbase to the old network generatesd by the router. The app offers to connect to another network and it shows the neighbours networkw but not my mesh network.i first had this problem with my other sonos products (one and symfonisk) but then they connected to my mesh network. I can only use the mesh network because it is the only one covering the whole house and I have sonos «all over». How can I connect the playbase? Also tried to type in the mesh network name and enter password manually but no luck.
Hi Sonos Community, I’m running into a persistent issue with my setup and would appreciate any advice. Here’s my current setup:• Sonos Arc (Ultra): Hardwired via Ethernet, WiFi disabled.• Sub (Gen 4): Also hardwired via Ethernet.• Two Era 300s: Configured as rear speakers, currently connected via WiFi. I’m experiencing consistent stuttering or audio skipping from the Era 300s, which is frustrating. Here’s some additional context:1. WiFi Setup: I have a robust whole-home UniFi system with excellent signal strength throughout the house, including the living room.2. Troubleshooting Steps:• Re-enabled WiFi on the Arc while keeping it connected via Ethernet, but the issue persists.• Ensured no interference from other devices or sources. I’ve ordered the Ethernet dongles to hardwire the Era 300s, but I was hoping to avoid additional cables and keep them wireless if possible. Has anyone experienced a similar issue? Are there any recommendations for further troubleshooting or adjustments to th
My Arc works just fine. It is hardwired to my AV distribution center in the basement, along with 5 amps for different zones. The HDMI interface on my Samsung Frame TV works flawlessly. The Problem: ARC refuses to pair with the app. Every single other speaker, amp, MOVE, and random S1s I have around the house all paired long ago, and work perfectly. whats the deal!? How do I fix?? Avid Sonos user, so please assume I’ve done all the typical troubleshooting (unplugs, updates, etc).
We have 6 original Sonos play 3 speakers;2 original play 1 speakers; a Boost; 2 soundbars; 2 base speakersand a Move portable speaker. The eight are identified as 4 rooms. ON the Sonos app all of the rooms have disappeared, the only one visible is the Move.Any idea what's up?
Looking for a man cave solution. I have 7 TVs set up in sports bar fashion. I’m curious how I can get the ability to select which tv I want to source the sound to the sonos speakers connected to my Sonos amp. Just like at a sports bar. All the games on but I want the ability to select which one I want sound from.
Already have an account? Login
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.