Fix & Optimize

I have two One SL’s and I want to connect a turntable to them.  I was thinking to get a Move 2 or Era 100 with a in-line adapter.  All the speakers would be in the same room. Does anyone have this setup and could share the experience?  Is there any delay between the speakers?

I have an existing Sonos system. In the living room it has a Sonos ARC, Sub 3, and two One SL speakers.Office has a Sonos ERA 300. Just got a Victrola Stream onyx turntable.  I used the Victrola app (per the instructions in the new box) to attempt to set up the new turntable.  I was successful at linking it to my network through the Victrola app.  It did not give me any options I could find to add it to my existing sonos system in the Victrola app.  I went over to my Sonos app to attempt to add the Victrola Stream onyx to my sonos system.  The sonos app could not find the Victrola Stream Onyx.  I did a factory reset on the Victrola Stream Onyx.  The Sonos app still cannot locate the new Victrola Stream Onyx after the factory reset.  I have unplugged and plugged back in the Victrola Stream Onyx in addition to the factory reset and still no success with the sonos app finding the new Victrola Stream onyx.  Any ideas?

I have had to factory reset my Sonos playbase to get it back on the network.  Since that moment I have been unable to pair the LG magic remote with the playbase.I have been through many posts which explain how to do this, and have tried every combination of instructions use the LG device connector, choosing Philips as the make as Sonos does not appear.  I have followed the post that describes using the Sonos app with ‘replace remote’, but this does not appear on my version (iphone) of the app.  That post seems to be from several years ago.Does anyone have any ideas?  The LG tv is a 2016 OLED. Derek Clements

Hej,Kan I hjælpe mig med, at finde ud af om denne Sonos One højtaler er stemmestyret eller ej? (SL eller gen. 2?) ☺️

I recently bought a couple CR200s. I added them using a wired ZP80. They are now working on the system. My concern is that I cannot see them showing up on sonos.com or the S1 app. This limits me because I wanted to take advantage of the upgrade discount they would have. How can I make them show up in my sonos.com system/upgrade page if I have already added them to my system and they are working correctly?

I have 2 Sonos Play1 Tone devices that I moved today. The paint surface was sticky which I thought strange and tried to clean …. The paint has seriously degraded on both devices to the point where touching them results in a sticky deposit on ones fingers. Is this a known issue or specific to the models I have? Thanks 

I just purchased a Sonos Ace headphone set and cannot get it to connect with the app.  I already have many Sonos products including Playbar, Play:3, Play:5 and a Connect.  All of these I have to control through the Sonos S1 App on my phone.  If I go to the “new” Sonos app, it’s like it’s not compatible with ANY of my old sonos equipment.  And when I try to add my Sonos Ace it says it can’t find them.  If I try to connect the new app with my existing system, it says all of my equipment must be controlled by the S1 app… which can not connect with my headphones.  What gives?

After some time without use, being over the disconnected base the Sonos Move 2 doesn’t react when I connect the baseConnected directly with the USB cable to the charger the only reaction is Intermittently (every 10 seconds) on the front of the Move a white light comes on at the top and a red light at the bottomThen I tried a factory reset by pressing the bluetooth button and connecting again the USB cable, but it goes on Intermittently (every 10 seconds) on the front of the Move 2 a white light comes on at the top and a red light at the bottom.

I have 5 amps (one current generation) and one old soundbar, since the App major update, I have not been able group them. I get the “Unable to Connect”.For a brief period, I did have one update for all the units and it worked for a very short period. Then it failed again for months. Since 3 units are in one open area, it is very important to be able to group them. I tried power cycling all the units, no luck. They are all upto date for the software.  If it prolongs much longer, it would have to replace all the until with alternatives.  And not get any additional Sonos in the other rooms.

Just set up arc ultra and two era 300’s.When i play music from dedicated tidal app on a sony google tv, the surrounds do not work.I do not have this issue when using the android tidal app from my phone, the surrounds work fine. Is this normal or is there anything I can do?

Router and WiFi name and password changed. Cannot connect system.  

How can I listen to Spotify or tidal music on my passive speakers connected to my wiim amp and also on Sonos one speakers ( 2) at the same timeThanks  TAJAMMAL

I have a Project turntable running through a vintage Pioneer Receiver—SX 828, and just recently added a Sonos Port.  It works great to stream from our phones through the Pioneer and also the Sonos 5 and Era 100, but when I try to play vinyl, I can’t get anything out of the Sonos side.  Still plays great through our Pioneer system.  For the Port, I have the out going to the AUX to stream, and then ran RCA’s from the Tape Recording to the Port’s in, but still nothing.  The app shows that my line in is a turntable, but it never shows anything playing, so I am clearly not setting something.  Have confirmed that this receiver has a signal out for that Recording connection, so think it is something to do with how I have the Port configured.  Open to any suggestions.  

My sonos 5 blinks green and when I try to update it it pop up error 30

My settings 1. TV - C3 LG TV2. pass-through has been turned on.3. eARC enable.  4. “Dolby digital plus” has been selected from DTV Audio settings.  I can not play the Netflix’s Dolby atmos contents. Always displaying as “Dolby Multichannel PCM 2.0” even though I have selected the pass-through in my digital sound output. And I can not see the audio in: in my Sonos app >  about my system page while the sound in playing in ARC ultra. Could you please somebody help me here.  

Sonos audio quality is amazing but useless as it never works as it should. Literal garbage. Save your money. Buy something else

Hi all,I recently purchased an Arc Ultra and Sub 4. I'd like to get 2 rear surrounds but I don't think the layout of my room is ideal.Please see the pictures of the room below. We don't want to put the speakers on stands behind the couch.I was previously considering 2 Era 300s to mount on the wall but I read you don't want to mount them close to ceiling and I don't think we want to mount them in the middle of the wall height wise.As such, would love your thoughts on: Do you have any suggestions on best set up? If I mounted Era 100s in a location close to the ceiling like where you see the previous mounts in the photo (from old wired system) would that work? If no Sonos setup works well would it be better to purchase non Sonos rear speakers and connect them via amp? We have wiring in the walls already from prior system. Thanks for the help!  

Can I pair Sonos Arc Ultra with Play 3 for surround? 

My gen 4 sub will not connect to a room

Hi, my play 3 has been working fine for years. Now  it's disappeared from the app. I have factory reset it, it says connected to my sonos system again, but it does not show up in the app. Any ideas.

Took it all to the dump today— three speakers, bridge, amp… used to work fine then after one year of app updates and failure to connect I pulled the plug. A systemAbsolutely so primitive.  Spent way too much money on Sonos, but can’t take it snymore! Bye Bye ! YS Sonos! 

Have a Beam Gen 2 with SYMFONISK for rear surround speakers. Have the opportunity to switch to Play: 3’s for rear surround speakers. Will there be a significant improvement switching to the 3’s for rear surrounds?

I recently bought a new tv that does not have the audio optical cable port on the back. Is there an adapter that allows me to still connect my Sonos Ray to this new tv?  Thanks for any help. 

Yes I am probably not is what is accepted as a 'first world country' but we have access to those type of tech. Your speaker is dissapointing with this error 1000 and I took it with on our camping ttip and have only expensive weight with me now. Thanks for your first world issues. It spoilt my vacation.

I am considering purchasing a turntable with the Five as a set. Will this also connect to a set of 100’s and 300’s?