Components and Architectural

Please can someone confirm if the connect amp will join my LG tv set up - i have the soundbar and wireless subwoofer and so would like to connect my sonos speakers (2 x play: 1's) and have full suround sound. Thanks ash

I had a perfectly fine system with my iMac library holding all my music, Sonos controller, Sonos Sub-Woofer, Sonos Connect, Sonos Boost running some nice outdoor speakers, Sonos Playbar for the TV.. you get the idea. Well, the rug was just yanked out from underneath. Controller on the Mac wouldn't work unless I downloaded and installed the software update. I did it. It didn't work. After a lot of checking come to find out the OS on my Mac is not supported and per Sonos it's because Apple won't support it anymore. That's really weak. I have hundreds of software on my Mac and I know if I upgrade the OS then I'll loose a lot of those. I live by the axiom 'If it isn't broke, don't fix it.' Apparently in Apple and Sonos' infinite wisdom it does need fixing even though it all worked fine. I'm sure they could have a stripped down version of what it used to be but really, why couldn't they at least allow me options? Lets see, choose to remain working as it is and forego support that I never us

Hi everybody Is it possible to use the Hegel H160 with Sonos Connect?

I've just purchase a ZP120 and don't know which voltage setting to select. I live in the US (Washington). The label under the power connector reads 100-120V-/220-240V but the voltage select switch has 115 or 230 selections. Having seen several posts where the wrong choice was made and their unit was fried I want to make the correct choice for where I live. Thanks.

What are best DJ software products to integrate with Sonos? I am getting Connect and have some P5s. Thanks.

Any idea how i get the controller back onto the sonos system. currently using my android phone to connect rather than the dedicated controller. Help please!

I have two pairs of speakers installed in the ceiling in my kitchen.  I would like to know whether these can be powered by a single Connect:Amp. The speakers are rated as 6 ohms. I would be grateful for any advice or guidance as I am looking to increase my Sonos set up as soon as possible!

Hi, I have recently moved to a college where there is one wifi network for everyone to use. A couple of people have added their Sonos to this network already, which means that I can't add my Spotify account to the network. It is quite annoying that the others are able to control my Sonos, and I am able to control theirs, since I sometimes accidentally select the wrong one, and they do the same. How do I get my Sonos on its own network/channel so that only I can control my Sonos, and my Spotify account can be added to the network? Thank you!

Hi is it possible to get the sound from my Apple TV to play wirelessly through my play3 ? Thanks

Hi, I borrowed sonos from a friend to use at my party. I cannot connect the speakers using my internet password. Is it even possible for me to connect to sonos using my Wi-Fi connection?

I have a Sonos Connect-Amp but seem to need more power and am planning to switch to a Connect with a separate amp. I also use a speaker selector box with built-in volume control. I currently have six zones and am going to expand to eight. I'd like to get a good amp that won't break the bank but will give me 100 watts/channel or more. Seems that I need to double the power of the Connect-Amp or it's not worth the trouble. One other requirement is that the amp must be auto-sensing -- it has to turn on/off with the Sonos. I've done some searching and found some old threads but am curious as to what others are using now.

I have everything connected but the app can't find the play 1 speakers x2. I have checked wifi connection. I have connected one speaker to the LAN also. Still nothing....

Hi My son is about to start university and will have access to the college internet through an ethernet port. I have read previous threads on access in such situations but wonder if this specifically should work : BTHomeHub5 - disabled WIFI both frequencies; ethernet wired to access point. Play 1 and laptop ethernet wired to BTHH5. Will laptop be able to control Play1? Alternatively, if Play1 ethernet wired to access point, can laptop or android phone connected to WiFi control the unit? John

Video half way down http://www.theverge.com/2016/5/18/11702284/google-home-io-2016-ai-voice-search-advertisement Is it me, or is it the over the top American thing, but half way through I became annoyed. Perhaps because the family were talking to google more than each other!!!

Dear Sonos: First of all, I need to admit that your quality sound is amazing, but the interface....well... it's horrible, a mistake....and I suppose everyone knows that. So, what exactly are you trying to solve about this? I can imagine with: 1. Spotify App? 2. Amazon Alexa? I have named these because you're developing in these apps. 1. Spotify When i use Spotify on my Smartphone, I'm able to use the equalizer, music quality, etc. When I use Spotify to control my Sonos, i can't use the equalizer on Spotify, so? Must I use the Sonos App? and....I don't understand, are you developing a new way to control your Sonos, but with limitations? And worst? I just bought my Playbar and Sub, I just wanted an excellent Sonos App like the Sonos Audio. 2. Amazon Alexa I don't understand when you say on August 2016: Beginning in 2017, anyone with an Alexa-enabled device — right now that's the Echo, Echo Tap, or Echo Dot — will be able to control Sonos speakers with voice commands.

We just built a home and have three areas of existing speakers in the ceiling. Two speakers in the dining room, two in the kitchen and two outside on the deck. They are all wired to one location in our pantry. There will not be a tv or anything in there. What can I get to hook up to them so I can play music? Any help is much appreciated. Thank you!

I am potentially moving to the USA in the next few months and want to take my play3's with me (I have three) I just have the units and no connecting AMPS. Will I be able to use the Play 3's over there by using an adaptor or will I need to buy new main's leads or will the change in wattage mean new units! Keen to avoid the last one if possible. Just not sure if they are made universally and then just different country adapters supplied? All advice gratefully received.

Can i use play 5 without wifi. Using aux cable?

Anyone in the UK purchased an Amazon Echo and have it controlling your Sonos system or is this functionality not yet available? Also, does anyone know how the Amazon Echo will actually integrate with Sonos? Will it have to be hard wired to speakers or work just by the Alexa voice control? Many thanks for your time.

I was wondering , I've got a Sonos play 1 speaker ready for downstairs kids play room. I can't justify a play bar for kids room. I was thinking of getting a Sonos connect and running my tv audio through play 1 speaker that way? Would it work or would it not be s recommended thing to do? Look forward to anyone's help! Thanks Sam

Hi everyone, I am trying to set up a new system with the Play1 that I purchased. I have downloaded the Sonos app on an iPhone 4 with operating system 7.1.2 but when I open it only one option shows - "Connect to an existing system." I have tried deleting the app and installing it again, but get the same result. Thinking it might be the phone, I tried downloading the app on my daughter's iPad but again there is only one option showing - to connect to an existing system. Before doing this I had connected the speaker to the power source and it showed the white light then the flashing green light as described by the Sonos support pages. I have searched through the help pages but I've not found any comments on this problem. Your help, please?

My set up is a connect amp, play3 speaker, and a marantz sr5009. I want to keep my current set up (7:1 wired setup) and us the play3 as a wireless patio speaker(So that i can listen to football games). This is where i hit a snag, the volume is very low even on the high setting in the sonos app. I have the connect amp plugged into the audio out of the marantz. Is there anyone out there who has had this same problem, and have a fix for this. i feel like i have tried everything except for going out and buying a preamp. thanks ~1morewave

I've read various forum posts about this sort of issue, but remain a bit confused about the possibilities with my unique setup. (I'm coming from a house where I used Sonos in a conventional sense with multiple Play 3s, an AMP, and Bridge). I bought a new house with a built-in distributed sound system by Russound. It consists of a multi-zone amplifier which feeds 6 zones. Each zone has a wall-mounted controller (on/off, volume and source) with in-ceiling speakers. http://goo.gl/uJuPeJ Currently, I have an Airport Express hooked into the "CD input" on the amp and use an iPhone/iPad/Mac as the music source which is controlled with the Apple Remote iphone app. It works okay, although with this setup, different music cannot be played in different zones. So, first question -- is there a way I can use Sonos technology (?CONNECT and CONNECT:AMP) to give me multi-zone control? And second question: If the above is possible, can I enhance some of the existing zones by adding the free-st

Hi guys, I've tried to update my sonos system and it seems to have update all my speakers apart from the Sonos Bridge. I've unplugged, power cycled whilst holding the button in, but it still is coming up with a failure when trying to update. If I click use anyway, I can use as normal, it just doesn't seem to want to update. Any suggestions?

Hey all, So, I am trying to do something relatively simple here. I want to put a "max" volume limit on a particular zone. I have an outdoor setup and I'd like to be mindful of my surroundings. It's about 2000 square feet of space and I have 6 speakers out there connected to two zones. I used an outdoor volume dial (can't find the link at the moment) for a while and it worked wonderfully. So I wanted to upgrade to this: http://www.amazon.com/gp/product/B00XUM9OAM?psc=1&redirect=true&ref_=oh_aui_detailpage_o00_s00 All the speakers are from htd: http://www.htd.com/Products/Outdoor-Speakers/Q65-Outdoor-Speakers It is connected to an CONNECT:AMP CONNECT:AMP --------> VOLUME DIALS ----------> Speaker Pair A, B, C. By driving an input on the "A" input and setting the volume controls down WAY low (literally one "click" up from off), I figured, I could leave the software/zone at "max" volume while then using the dials on the volume controller to effectively limit the max v