Skip to main content

Advanced setups

This is the place to troubleshoot your Sonos hacks, advanced setups, and third party integrations. Be mindful of your products warranty, and that Sonos staff can't always assist in an official capacity here.

  • 2,145 Topics
  • 13,669 Replies
AjTrek1
AjTrek1
started this topic

Let's Talk Networking

HelloI’m a strong advocate of a healthy and stable network. Not just for the sake of enhancing Sonos enjoyment but also fundamentally. That...
  • 7
  • 5
Corry P
Corry P
answered this question

Sonos and Mesh network

Hi @Bourney Welcome to the Sonos Community!I believe that system will work with your Sonos without issue, yes.Please note that when you add...
  • 0
  • 3
ratty
ratty
answered this question

Two systems on one wifi network, with only one phone controller?

As you perhaps realise, one set of speakers would need to be factory reset and then set up afresh as a ‘new system’ while the other set is t...
  • 0
  • 14
2145 Topics
P
Paul_266Contributor I
posted in Advanced setups
Wink Hub Integration

How about integrating Sonos control into the Wink hub the same way it's been integrated with Smartthings?

473410
C
J
jhayd11Contributor II
asked in Advanced setups
Harmony & Sonos - Clear the queue?

Hey guys, I am getting the majority of setup on my new automated home finished. Right now I am stuck on "moods" for listening on my Sonos. Example: In my livingroom/office, I set up three "moods" 1.) Morning chill 2.) Office background music 3.) End of day Rock playlist Currently, when I select any other these playlists in Harmony (each playlist is listed in my Sonos Favorites and then shown in the harmony remote), SONOS takes all the songs in the playlist and adds to the current queue. This happens both when starting a new "listen to sonos" with a selected channel as well as when using the remote to select a new playlist once the the activity is started. This obviously doesn't work well, considering I am trying to change the mood of the room permanently with each selection, not mix the playlists together. Has anyone figured a way to have Harmony replace queue, instead of add to queue? Alternatively, is there a way to have Sonos default to replace queue, instead

11805
MikeV
C
carguy66Contributor I
asked in Advanced setups
POLK OUTDOOR SUB ADDED TO OUTDOOR SPEAKERS USING A SONOS CONNECT AMP

Can I add a Polk outdoor Sub to current outdoor speakers that are connected to a Sonos Connect Amp. ?

6722
K
B
Bill_20Contributor I
asked in Advanced setups
Playing Podcasts from Android Device

Sonos says "For podcasts to show up in the Sonos app under "On this Mobile Device," they must reside in the 'Podcasts' folder on your Android controller. The podcasts folder should be in the root directory of your Android device" What does "reside in the Podcasts folder" mean? That all the media files for all podcasts have to be in that foldre? Can there be subfolders? Has anyone gotten this to work?

74646
A
ashiant
ashiantContributor III
asked in Advanced setups
Ability to Disable Bridging and BDPU packets?

I realize this is a home product, but I would love to use it on my corporate network in my office... I was wondering if akin to the ability to shut off the wireless there was a way to disable the bridging so that a corporate network won't immediately "protect" itself and shut a port down.

6391
ratty
B
brdsutteContributor II
asked in Advanced setups
what happens with crossover frequencies in zones grouped with zones with a sub?

Hi all, I did not find this specific question anywhere, so here I co My ground floor setup, in rooms in an old house that are linked via multiple arches, hence I need speakers everywhere. seating area: 2 play:5 gen2 in stereo setup (so 1 zone/room) kitchen area: 1 play:5 (in its own zone/room) children play area: 1 play:1 (in its own zone/room) If I buy a sub, I will become part of the seating area zone/room. So now the question: If I group all zones to play music throughout all areas, will the play:5 in my kitchen and the play:1 in the play area adapt (w.r.t. crossover frequency) to the sub then being part of the same group?

7046
K
F
fleetmanContributor I
asked in Advanced setups
Two homes with two NAS. Can I duplicate my iTunes library so I can listen with Sonos at both homes?

I have two homes. One is a vacation home, the other my main residence. I currently have a large iTunes library database of over 1,500 CDs that I ripped to a rack mounted RAID Network Storage Device (NAS). Sonos works wonderfully with this system at my primary home. I have many Sonos devices at both homes. So I bought a 2TB portable NAS unit and copied all of my iTunes data onto that device.I carried that device to my vacation home, plugged it into my network, and told my Sonos controller the location of the copied iTunes Database. Sonos refuses to play the music saying that I don't have permission to access these files. I own the music. These were not downloaded files. It is all from CDs that I had purchased. Can anyone tell me how to correct this situation?

110922
V
J
JozefBBContributor I
asked in Advanced setups
Sonos APP opening of the link URL

Hi I would need to open SONOS APP Android tablet by using the URL that is it?

27393
B
W
willroosContributor I
asked in Advanced setups
Connecting Playbar to amazon Echo

I've connected my Playbar to my router via ethernet cable. As the playbar doesn't have a line in to connect directly to echo. How do I get my echo, which is connected to my (same) wifi router to connect to sonos? The echo app only seems to look for bluetooth, which I believe is not a feature on sonos. I also have a Play1.

17441
chicks
B
bfussell6412Contributor I
asked in Advanced setups
Samsung KU6300 TV Smart Remote Setup

Current setup: - Samsung UN55KU6300 with smart remote - Sonos Playbar - HDMI 1: Ruko 3 - HDMI 2: Playstation 4 I am attempting to configure my TV remote to control the volume coming from the Sonos Playbar. The Remote Control Setup feature in the Sonos app does not inherently work with this TV remote, and I already found help topics describing how to use the Universal Remote setup on the TV to assign a dummy device to the TV input, thus enabling the IR transmitter on the TV remote. Then, the Sonos Remote Control Setup feature will complete successfully. My issue is that the volume control will only work for that single TV input. If I change inputs, the remote no longer controls the Sonos Playbar volume unless I go through the Remote Control Setup again, in which case it overwrites the connection with the other input. I know other people have been having this issue, but has anyone found a solid solution? My TV does not have an IR input, so I can't use an IR blaster. Has a

12042
A
BarryM
BarryM
posted in Advanced setups
Sonos with local media servers?

Is anybody able to use the limited UPnP server option available in Sonos? ie. Manage|Settings|Advanced|MusicSouces|ShowRhapsodyUPnPServers Are you able to browse the server? Are you able to queue albums? Which media server are you using? Or, is anyone successfully browsing and queuing albums using Sonos' "Show Windows Media Server" option? I would like experiment a little with these, but am having trouble finding anything which works.

15100
BarryM
P
psychoboogieContributor II
posted in Advanced setups
line out plus speakers

I have a b&o mini system in the living room with the sonos hooked into it from line out. I have run speakers to the kitchen as well, in the other room. Problem I am having is that the signal on line out is not as strong as the direct speakers from the sonos amp. Wondering what a good solution might be, headphone amp system. other problem is the speakers are in the kitchen and can't be muted. Not enough room for sonos in kitchen. anybody.... I know I know silly setup. just didn't want the amp to waste...

21695
Stuart_W
1
12345
posted in Advanced setups
What the hell happened to this product? - Hey Sonos

The last 2 months has been a disaster. Every since the alarm issue in Dec of 16 my system has gone to pot. Let me clarify that I've been with Sonos as an early adopter probably close to 10 years now so I've got experience in how it used to be. I have multiple units including 1 soundbar, 1 sub, 6 plays, 7 connect amps, 2 bridges and 1 boost. First there was this alarm issue and the solution was to wait until the new year and that would fix it. Proactive for sure. Ever since the alarm meltdown my sonosnet has been spotty to say the least. Yesterday with most of my system being unreachable or unplayable or not being able to group units I decided to move from Sonosnet to my wireless as the backbone. I'd always used and been happy with sonosnet but I believe all things change and perhaps it was time. Boy was that a mistake. Once all units showed up as ready I hit party mode and guess what, half of the units weren't added. A few tries later and every unit but one would come on

184932
bockersjv
Carlos.Marion-Landais
Carlos.Marion-LandaisContributor I
posted in Advanced setups
How To Pair A Samsung UN65KS9500XFZA TV & Sonos PlayBar

This topic should assist with pairing multiple devices connected via HDMI on the Smart Hub to use the Sonos Playbar through the Optical Connection. Once the TV has been completely setup. Ensure that the Sonos optical cable is connected to the Samsung Smart Hub. These settings will only allow you to use the remote for volume control on the devices connected on the HDMI Ports, it will not allow you to control them via Samsung's Anyconnect option. If you need to control a device using the Anyconnect feature, then ignore setting up that HDMI port. As an example, I have 3 devices (Playstation, Amazon Fire TV & Chromecast) connected to the HDMI Ports. To Setup, follow these steps: For TV & Amazon Fire TV Settings 01. Select Sources from the menu. 02. Select Universal Remote 03. Select New Device 04. Select Home Theater 05. Type Sonos on the search option 06. Select Sonos 07. Select the HDMI Port of the device being setup 08. Select Power Test (Nothing will happen) 09. Select

7371
Carlos.Marion-Landais
S
Sambryan101Contributor I
asked in Advanced setups
Extending my Sonos and WiFi into the shed

Hi everyone, I currently have a bar and sub in the lounge, 5 in the living room and 1 in the kitchen. I want to add a player in my shed, but my WiFi does not connect on my phone down there. I have power, but I have read that powerline extensions are a no no with Sonos. I struggle with tech and WiFi networks etc, so I was hoping that someone might be able to give me some guidance. My internet is via phone line as there is not cable down our road. The WiFi router is pretty poor, the signal is shit even though the house is tiny. My shed is around 20m from the house. And as it stands I can't pick up any WiFi at all. The shed does have power in it. But I have read that powerlines don't really work with Sonos. I think that I might need some sort of WiFi booster but I have no idea what i need and where to get it from. If it would make things much better then I can run a LAN cable if required, although this would be a massive ball ache. Ideally I want a simple plug

5112
1
P
philippe44Avid Contributor I
asked in Advanced setups
Chunked encoding transfer and MP3 ? (a technical question)

Hi - I asked that question a couple of years ago: I'm using my own software to control my Sonos using UPnP for some special setup. When sending an audio file, in UPnP it's a simple webserver that handles the player's request. Sonos devices handle well, when the file is flac or wav, a HTTP transfer mode named chunked-encoding which is used when the source does/can not know the size of the file to be transmitted and just send data in chunks. Strange enough, chunked-encoding does not work with MP3 and I can't see the reason why, so the un-elegant workaround is to fake a file size and cut the HTTP connection when needed. I was hoping that this would be corrected with new releases, but it does not seem to be or there is another reason that I'd be curious to know. I know this is not a forum for dev and Sonos has little reason to spend quality time on that, but raising a ticket does not hurt and if it ever reaches the dev team, they might want to correct that for sake of a cleaner implemen

9055
J
G
Gav_SonosEnthusiast II
asked in Advanced setups
Music Library Artist Folder Artwork

Hi All. I'm relatively new to Sonos as of last year. My query is how to add artwork to Artist Folders on a shared drive. My setup is via a NAS drive. Now i'm not talking about Album Artwork. This displays fine. What I am talking about is when browsing my Music Library which is on a NAS Network drive and scrolling though Artist selection there does not appear to be anyway to display artwork on a folder to display on the sonos app. I tried everything from embedding artwork to the folder itself but no joy. Looking at other posts from 2013 has suggested it is not possible? Surely this is not the case?

5250
G
O
OmalbContributor II
asked in Advanced setups
Configuration detail question

Can someone please explain what "Associated ZP: 192.168.x.xxx" (directly below) in my Sonos config refers to? BTW...its the first line my config file. Associated ZP: 192.168.x.xxx --------------------------------- PLAY:5: Bedroom 8-D0-AC-A4:3 Version: 7

10814
J
S
scubafanaticContributor I
posted in Advanced setups
Looking for integration ideas

I'm considering purchasing the Sonos system and I'm looking for integration ideas with the NEst and Philips hue lights - maybe with smartthings? I'm deaf so the music isn't really a concern of mine. But I do have some ideas that I've always wanted to do. In Star Trek, when they go into battle, they flip on red alert and then there's red lights blinking. I'd love to do something like this for the fire alarm with the Nest protect. They already have an integration with the hue lights (a bit on the slow side though and sometimes you have to reconnect it). Would love if when the nest protect went off, the lights blinked red AND the sonos blared red alert from star trek. Maybe also a proximity sensor - when specific people come home, different types of music plays so other people in the house know? Are any of these possible?

6294
J
B
brockw66Contributor I
asked in Advanced setups
Paring Sonos with Echo Dot

What is the best way to control Sonos via the Amazon Echo Dot

18418
U
P
perez.chris01Contributor I
asked in Advanced setups
$2,500+ House System Connected Speakers Intermittently Show in my Sonos controller

So this is extremely annoying and I am extremely frustrated with the producr to date. I have had these device almost 2 years now for the most part, and have been having this issue the last year. So the issue is with the application or the speaker itself. About 4 months ago, I upgraded our home Wireless internet with a new router/modem repeaters, etc. i thought this was the issue with the connectivity. Apperently thats not the issue, because it is happening to date. Here is the system: Play 3 - Garage PlayBar - Fam Room (Closest to router) Sub - Fam Room (Closest to router) Play 5 Gen 1 - Main Area (Furthest From Router) Play 3 - Master Bedroom Play 1 - Master Bath Description: So this occurs intermittently, there is no cause, pattern, or reason quite frankly. Most commonly it occurs in the fam room, and the main area. I live in a split level home. The speakers are all connected wirelessly and connect to a Bridge which is hardwired to the router. All of my speakers conne

61712
C
M
mannfridayContributor I
asked in Advanced setups
House with Multiple Wifi Names - How to Add Players

Hey there, our house has mutliple Wifi names throughout: KitchenWifi, PoolWifi, LoungeWifi, BedroomWifi - the reason being is we found having them all the same name (eg. EntireHouseWifi) resulting in devices keeping a latch on routers that could be far away (weaker) rather than the stronger signals nearby. Having the wifi networks different names meant if you were on your laptop in the kitchen, you could purposefully choose "KitchenWifi" and be 100% sure you were on that particular router. My question then, is how do I connect different players to particular networks - from what I can see, you can only choose ONE, and your speakers will all try to latch to that name? Or am I wrong? Second part to the question is, if I connect my Play3 by the pool to the ethernet network via cable, does that take governance of the signal/path or will the speaker still attempt to join the Wifi mesh?

14929
P
T
tommy.giguereContributor I
asked in Advanced setups
Sonos surround system with computer setup doesn't work

Hi support, I have an issue where I can't get surround speakers to work with my current computer/Sonos setup. I've read a lot of stuff on the issue but couldn't find a satisfying answer. I own a playbar, 2xPlay:1s and they are configured as surround system in my sonos controller. So I have this computer hooked up on my Samsung TV (Model: PN51F5300) with a HDMI cable. It has an Asus P6X58D-E motherboard with AMD 6770 gpu. The playbar is connected on my tv through the optical cable. I suspect my tv doesn't relay anything else than PCM/2.0. When I go into sound settings of the tv, I only have the option of PCM. The other option doesn't output any sound. I tried to connect the computer's optical cable directly to the sound bar and it did not work. My main source of video comes from my Plex server. In both cases, when I play music through the sonos apps, it works perfectly. I understand that my TV doesn't relay anything else then PCM. What could I add to my setup to have

10314
SHARKB8T
W
warrendrcpropertycoukContributor I
asked in Advanced setups
2 Sonos Systems - One House

I have a challenge for anyone up to the task. Not a straightforward arrangement so I have attached a diagram which I hope makes sense. (They say a picture paints a thousand words ) I live in the country and have little or no broadband. I therefore use an EE Huawei E5180s-22 4G LTE 150Mbps Router Cube. I place this in the bedroom as it gets the best 4G signal here ( Up to 32mb ) I have cable from the back of this router to my office, which is where most of my tech lives. In my office I have an RJ45 splitter box which then connects my iMac, Lightwave system and Netgear Arlo home security system. I also connect in to a TP link power extender at this point which then provides good coverage throughout my house on all floors. I have a play 1, 3 & 5 in the house which I have set up using the ethernet cable and used all of these speakers wirelessly when I first set up the system. There is also a cable from this splitter box to an out building some 100 metres away. Within the

86510
J
B
Brian_9Contributor I
asked in Advanced setups
Moving music files to new server and existing playlists

I have purchased a QNAP NAS and will be moving all my music files from an old NAS to the new server and also setting up Plex with Sonos. I have created a ton of playlists through the SONOS app, once I point SONOS to the new location of the music files with the playlists continue to work or will they all have to be created again?

10335
D
Terms & ConditionsCookie settings