Speakers

My question is: Can a Play:5 be fixed? My synopsis is below. I am very disappointed with the quality of Sonos products that was registered in 2016 when I opened. I spent a little more that $500 for a Play:5 (I own a Play:3, a Surround Set and a Connect) and it just stopped working. We tried all the possibel options to get it to work with and without Sonos tech support, but was told it was a "dead" speaker. I was told that nothing can be done, but Sonos would give me a 30% for a new one. But, Sonos wanted the old one. I thought this was strange since it was broken, so I asked why and was told that was part of the deal for the 30% off a "new" speaker. But the speaker is dead! So, I felt like something was not right and asked if the speaker I was going to buy was new. They said no, it was refurbished (should have mentioned that at the start). Now the picture is coming into focus - we can't fix your speaker and send it back you, but we can sell you someone else's "dead" spea

Hi, I am looking to do an install of 2x sono's one (gen 2) speakers outdoors, and I noticed it had "some" weather protection. installation was going to be blue a eave, which is approx 100cm in length, so should be reasonably protected from direct weather "aka, rain". I guess instead of asking the usual "can you leave it outside", what is everyone actually doing? what successes and fails have you had. Rgds, Chris

I'm new to the Sonos world - having waited for Google Play integration (thanks!) - and am generally very impressed, as it's a joy to use such well designed products. However, I've been surprised that Groups functionality is so weak compared to what I'd expected... I have a large living room that has an LR Pair of Play:1s in it and a single Play:5. When playing music in that room, all three are *always* used together, but this has exposed design shortcomings of the current Groups functionality. I'd anticipated being able to configure all the speakers in my living room (ie. all those speakers that are *always* used simultaneously) to form a "permanent" grouping, not too dissimilar to how you can "permanently" create LR pairs. Currently, Groups are what I'd term "soft", and this leads to the following shortcomings: - THE PHYSICAL VOLUME BUTTONS HAVE BEEN RENDERED USELESS, SINCE THEY DO NOT CONTROL GROUP VOLUME. For example, despite my three speakers

One of our sonos play1s occasionally fades in and out of music when paired with the other sonos play1 and the sound bar. So when they are all playing together this happens. Please advise

Hi Sonos. I've had a pair of Play:5 gen. 2 for a month or so and it has been working flawlessly as stereo speakers in my living room. However, tonight all of a sudden the right side speaker didn't play - it did earlier this morning. Thus, I "dis-paired" the speakers and tried to set up the right side player again. Which failed. So I reset it to factory default. Then it seemed like it was working properly: The light flashed green. So I went on to set up the Play:5 Gen 2 as a new speaker: I went to settings, tapped add player, logged in, made sure the player was powered (still green light flashing), selected Play5 Gen 2 from the drop down menu, pressed the connect button, heard the sound, and then.. instead of turning white the player's light turned orange (at first flashing with some red flashing occasionally, and eventually SOLID ORANGE). Needless to say the set-up failed. So I looked it up on your website. Solid orange apparently means over heated? Howev

The title says it all. The music stops as soon as I close the Youtube app. This only happens while airplaying to the Sonos one. If I play the music trough the iPhone speakers, the music continues when I close the Youtube app. I pay for Youtube premium just for this feature and it does not work with Sonos.

Hey all. I’m a new Sonos owner, having just purchased a Sonos Beam. Other than complications with it not working with my Insignia TV HDMI ARC slot properly (which I resolved by using the HDMI to Optical adapter), I’m enjoying the sound of the Beam quite a bit. In setting it up though, I was completely shocked to find it wouldn’t connect to my 5GHZ network. I’ve streamed music using AirPlay for many years and when I jumped to 5GHz, stability improved dramatically, so I never used 2.4Ghz again (except for wireless printing). For example, the large multi-suite home I’m in now is packed next to other similar homes and thus the 2.4Ghz spectrum is over saturated making reliable streaming (let alone reliable Internet usage) on it pretty much useless. For this reason, I hardwired the Sonos Beam to my router instead of even trying to use it wirelessly. Can someone please explain the logic of this? I mean 2.4GHz does give you an extended range but i

Sonos now finally support Apple's multiroom technology, AirPlay 2, so Apple users can send any audio from their devices to Sonos speakers. Make symmetric step towards Android users and make Sonos speakers Chromecast available so we can send any sound from our devices to Sonos speakers. It's also make possible to cast to Sonos numerous music services without integration to app so it's very useful for users. Even cheap JBL and Sony speakers are compatible with Chromecast and Riva Wand speakers support both Airplay and Chromecast, Why Sonos users can't do this? Now I can't cast music from Deezer or Youtube Music apps to Sonos speakers and it's very sad. Please when you make Google Assistant available unlock Chromecast compatibility! Don't left your customers without Chromecast support! #ChromecastInSonos #FeatureRequest

In the Letter to Shareholders, it says Wireless speakers remains our largest category on an annual revenue basis and our product roadmap is focused on delivering new products in that category to balance and grow our overall portfolio. (Not in bold in the original) So, a new Play:3 seems possible, to "balance" the portfolio. But what is anyone guessing at to "grow" the portfolio?

Hi I have two ones and one of these feels strange when on even if it's not playing music. When you touch it there is a slight vibrating/static feeling which is hard to describe. The other device does not have this feeling at all. The strange feeling isn't accompanied by any strange noise just the feeling. Any ideas what could cause this?

I want to add a Sonos one, to my existing set up of a Playbar and 2 Sonos Play Ones currently set as souround sound. I understand I cannot use the new Sonos one as one of the surround speakers (unless I have 2 Sonos ones) but if I keep the existing set up as it is, can I add the Sonos one and acheive Alexa voice activation to the setup with the new Sonos one just set as an additional speaker. Would be grateful for any help. Thanks.

I moved in and had 5 bose built in speaker connected to an Bose lifestyle sa3 amp v1. I bought the sonos connect to connect the Bose speakers with my house sonos system. For some reason I can get it to work . Any idea out there ???

Evening All, First of all please accept my apologies for asking a question that surely must have been asked before. I did search the forum but couldn’t find a clear answer to my specific problem. I already have a Playbase and also a Sub that (if I understand it correctly) is connected to the Playbase on a 5MHz network. Last week I took a risk on buying a Play:1 to use in another room. eBay, of course ? Good news: it is in beautiful condition and works perfectly over Ethernet. Bad news: for the life of me I cannot get it to work over WiFi. Worse, I have tried a factory reset, assuming that perhaps some of my difficulties might lie in the previous owners settings. But the speaker flashed amber/white for 20mins then started flashing red/off. After unplugging and replugging it’s now flashing white/off and won’t stop. I have only found one thread on here and that ended with the conclus

Ive just bought a beam and it’s great. But I’m surprised that it’s quite fiddly to enable “reduce loud sounds” or “speech enhancement”. From what I can see they stay enabled when selected, but that then means you have to remember to switch them off when not needed. I’d like these to work more like settings on a mobile phone - ie based on either time of day or with some sort of scheduling option like night modes in many iOS apps. Personally I’d have both options enabled from 7pm to 7am.

Have 2 Play 5's in my system and one is cutting Bass in/out intermittently. Turning up the volume seems to keep the bass on. This problem only started happening yesterday and the speaker is 9 months old

I have a record player plugged into a Play 5 which works fine. When I share the sound with my Beam it play well for a bit and then keeps on cutting out. It is just in the next room along. Does anyone have any suggestions? Diagnostic: 1247772422

This may sound like a bizarre requirement but I like to drift off to sleep at night with the music on very low. I find the Play:1 just a bit too loud on its lowest setting, even with the bass & treble dropped down and the loudness off. Is there any other possible way of making it any lower? Thanks

I mounted my Sonos Play 1 directly to my garage door opener. Why? Why not 🙂 The garage sounds great now! I used a #20 `1/4 inch machine screw and a couple of lock washers. Very easy to do.

Hi! My wife can’t play via Airplay 2 the Centr App (meditations sessions). It plays fine on Apple TV. Is there something, what we don't know, how to play it to Sonos One? When she choose the room (Bedroom), it's just a silence. I tried to help her, but I can't. No ideas, what we need to do. Please help with that. There's a ten - minute meditation of the night, which we would like to hear through Sonos One.

We currently have our speakers placed throughout our living room. I am considering purchasing speaker stands. Does the SONOS Community have a speaker stand they recommend for SONOS Play: 1? I want something that is stable and blends into our living room design.

I am so tired of stupid UNNECESSARY updates that BREAK fully functioning systems for NO REASON.

I'm using Deezer on Sonos app, and while playing always skips the songs and shows a messages that is connection lost. How can I fix this?

Can Sonos tell us if the Play:1 will continue to be sold alongside the Sonos One for the foreseeable future?

I have had my Sonos system installed for about one month. All working as expected and I am happily showing off my system to friends. Today for the first time, my internet security software (Bitdefender Internet Protection 2019) is reporting that an Exploit attempt was blocked March 21 at 2:05 PM. Feature: Online Threat Prevention. "An SQL injection attempt was made by 10.0.0.40:1400. We blocked the connection to prevent the attacker from tampering with sensitive data" The image attached shows that 10.0.0.40 is my Sonos:One Is this a problem ? Assistance appreciated.

I have two PLAY:1 speakers that I only use when I'm getting ready for work in the morning. I've noticed that they register on my router as uploading about 3 GB of data per month EACH. Does anyone have any idea why this would happen?